What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 15 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 15 of 29

5340-66-085-1927
Coat And Hat Hook

660851927
1221CP: RNCC: 3 | RNVC: 2
1221: RNCC: 3 | RNVC: 2

25 Mar 1975

5340-66-147-3092
General Purpose Access Door

661473092
D-0518: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-66-160-2336
Quick Release Plunger

661602336
BM050096: RNCC: 3 | RNVC: 2

3 May 2012

5340-66-154-6570
Electronic Equipment Hardware Kit

661546570
SCES13909: RNCC: 3 | RNVC: 2

4 Aug 2006

5340-66-160-9309
Strap Fastener Loop

661609309
10000129-14: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-66-125-3479
General Purpose Access Door

661253479
DE580180620: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-66-155-1222
Collar

661551222
1021-0060-0002: RNCC: 3 | RNVC: 2

8 Dec 2006

5340-66-156-7656
Rod End Connector

661567656
057-RE001-150-12: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-66-151-8699
Loop Clamp

661518699
LTA08114: RNCC: 3 | RNVC: 2

7 Nov 2003

5340-66-128-5981
Friction Catch

661285981
HYL9921: RNCC: 3 | RNVC: 2
777: RNCC: 5 | RNVC: 2

8 Oct 1990

5340-66-156-5698
Threaded Rod End

661565698
ARLM1038: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-66-136-5418
Lift And Tie Downs

661365418
CES 19540 ITEM 119: RNCC: 3 | RNVC: 1

12 Aug 1993

5340-66-147-3299
Feed Port

661473299
50556: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-158-4753
Angle Bracket

661584753
SSSD372: RNCC: 3 | RNVC: 2
D152 ITEM 68: RNCC: 5 | RNVC: 2

11 Feb 2010

5340-66-147-0968
Electronic Equipment Hardware Kit

661470968
DE250980714: RNCC: 3 | RNVC: 2

1 Feb 2001

5340-66-147-8620
Horizontal Roller

661478620
F/2888-570-009B: RNCC: 3 | RNVC: 2
Q EDE F/2888-570-009B: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-66-150-2873
Loop Clamp

661502873
NO PRIMARY REF 66-150-2873: RNCC: 3 | RNVC: 2
03718281: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-136-9219
Mounting Bracket

661369219
PZ6: RNCC: 3 | RNVC: 1
GJL 120 1901 R0001: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-66-136-4591
Webbing Strap

661364591
DE580551063: RNCC: 3 | RNVC: 2

27 May 1993

5340-66-147-6570
Webbing Strap

661476570
FLSP-2500: RNCC: 3 | RNVC: 2
DT85049-G341/3: RNCC: 3 | RNVC: 2
DT85049-G341/3: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-66-106-5705
Dust And Moisture Seal Protective Cap

661065705
3382: RNCC: 3 | RNVC: 2

14 Jul 1980

5340-66-130-6684
Dust And Moisture Seal Protective Plug

661306684
634A: RNCC: 3 | RNVC: 1
03532106: RNCC: 5 | RNVC: 2

31 Mar 1988

5340-66-147-1990
End Cover

661471990
ST E031 2440: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-66-147-2633
Strainer Pa Bracket

661472633
DAS60520: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-103-7802
General Purpose Resilient Mount

661037802
M1403-50: RNCC: 3 | RNVC: 2
M1403-50: RNCC: 5 | RNVC: 2

24 Feb 1970

5340-66-085-9678
Manual Control Lever

660859678
NO PRIMARY REF 66-085-9678: RNCC: 3 | RNVC: 2
383015: RNCC: 5 | RNVC: 2

5 Mar 1975

5340-66-146-5944
Loop Clamp

661465944
20022-Z1002: RNCC: 3 | RNVC: 2
20022-Z1002: RNCC: 5 | RNVC: 2

2 Jun 2000

5340-66-146-4809
Retaining Strap

661464809
581-999: RNCC: 3 | RNVC: 2
581-999: RNCC: 5 | RNVC: 2

24 May 2000

5340-66-151-6913
Interconnector Asse

661516913
DE251750011: RNCC: 3 | RNVC: 2

19 Feb 2004

5340-66-145-7296
General Purpose Resilient Mount

661457296
CM03756/7: RNCC: 3 | RNVC: 2
M12A-425-06: RNCC: 5 | RNVC: 2
M12A-425-06: RNCC: C | RNVC: 1
CM03756/7: RNCC: C | RNVC: 1

20 Oct 1999

5340-66-146-6979
Access Cover

661466979
1405878: RNCC: 3 | RNVC: 2

14 Aug 2000

5340-66-144-5467
Webbing Strap

661445467
11-240488A-60: RNCC: 3 | RNVC: 2
01151C2S: RNCC: 5 | RNVC: 2

7 Dec 1998

5340-66-156-4023
Mounting Bracket

661564023
A0404901100: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-66-143-1456
Dust And Moisture Seal Protective Cover

661431456
138100 16440 K 0001/10: RNCC: 3 | RNVC: 2
9051354875: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-130-7280
Angle Bracket

661307280
016AMR261: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-66-161-2661
Bumper

661612661
1600-03-0107C3-02: RNCC: 3 | RNVC: 2
QVRL1600030107C302: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-153-2662
Mounting Bracket

661532662
A210 0289: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-146-1009
Mixer Guide Shaft

661461009
NC37: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-158-9134
Lock-Release Lever

661589134
1004898: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-66-147-2551
Manifold Bottom

661472551
DAC269: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-021-5804
Retaining Clip

660215804
187820R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-088-1816
Bow Handle

660881816
H636: RNCC: 3 | RNVC: 2
1213-251222: RNCC: 5 | RNVC: 2

20 Apr 1975

5340-66-141-6353
Webbing Strap

661416353
95WS0188: RNCC: 3 | RNVC: 2

15 Oct 1996

5340-66-159-6959
Angle Bracket

661596959
112.35.07.472: RNCC: 3 | RNVC: 2

6 Dec 2011

5340-66-154-8705
Mounting Bracket

661548705
15011725: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-66-154-8081
Mounting Plate

661548081
15007658: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-66-159-1842
Handle Grip

661591842
15008295: RNCC: 3 | RNVC: 2

23 Mar 2011

5340-66-128-4833
Retaining Strap

661284833
9097161140: RNCC: 3 | RNVC: 2
9097161140: RNCC: 5 | RNVC: 2

9 Dec 1987

5340-66-143-8037
Ass Webbing Strap

661438037
1804-2-G78/1209 X 1.5 MTR O/ALL: RNCC: 3 | RNVC: 2

1 Aug 1997

5340-66-155-1327
Access Cover

661551327
182618: RNCC: 3 | RNVC: 2

11 Dec 2006

5340-66-102-4604
Turnbuckle

661024604
EK007: RNCC: 3 | RNVC: 2

9 Dec 1979

5340-66-156-4501
Mounting Bracket

661564501
15013484-07: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-66-140-7922
General Purpose Resilient Mount

661407922
22-0141A-01: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-66-156-4691
Swivel Caster

661564691
600EHPS16TWSTWHL: RNCC: 3 | RNVC: 2
600EHPS16STWHL: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-66-159-5557
Handle Grip

661595557
DE510170007: RNCC: 3 | RNVC: 2

19 Sep 2011

5340-66-153-2156
Buckle

661532156
5340-018: RNCC: 3 | RNVC: 1
386-1325: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-66-134-4910
Mounting Bracket

5340-66-154-3164
Dust And Moisture Seal Protective Cap-Plug

661543164
CP50: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-66-160-2495
Spring Tension Clip

661602495
FLTB00111: RNCC: 3 | RNVC: 2

8 May 2012

5340-66-145-5210
Access Cover

661455210
SP6075: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-66-128-6829
Webbing Strap

661286829
DE620030017: RNCC: 3 | RNVC: 2

29 Jun 1993

5340-66-126-5588
Permanent Magnet

661265588
2151000017: RNCC: 3 | RNVC: 2

14 May 1991

5340-66-147-7764
Handscrew

661477764
A5311: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-66-156-5695
Retaining Clip

661565695
ARLM1039: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-66-144-3601
Target Towing Cable

661443601
RWC 6553/FMR TARGET TOW CABLE: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-66-157-4777
Angle Bracket

661574777
V0507-CE-1611: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-66-116-5538
Retaining Strap

661165538
180/40: RNCC: 3 | RNVC: 2

6 Oct 1983

5340-66-136-0980
General Purpose Resilient Mount

661360980
MS845002: RNCC: 3 | RNVC: 2

4 Apr 1992

5340-66-141-5685
Masthead Cap

661415685
300110: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-66-143-4228
Mounting Plate

661434228
492367-02: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-147-8797
Guide

661478797
F/2888-570-006B: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-66-156-4526
Angle Bracket

661564526
15013485-03: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-144-0075
Buckle

661440075
5340-051: RNCC: 3 | RNVC: 1
DEF(AUST)2010: RNCC: 4 | RNVC: 1
HM1140: RNCC: 5 | RNVC: 2

11 Dec 1997

5340-66-150-0693
Rim Lock Set

661500693
NO PRIMARY REF 66-150-0693: RNCC: 3 | RNVC: 2
04072005: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-147-7769
Mounting Bracket

661477769
A5321: RNCC: 3 | RNVC: 2

12 Sep 2001

5340-66-143-2356
Mounting Bracket

661432356
AYG4255: RNCC: 3 | RNVC: 2

23 Feb 1998

5340-66-127-0382
Dust And Moisture Seal Protective Plug

661270382
040-5020: RNCC: 3 | RNVC: 2

30 Jun 1986

5340-66-135-1307
Bail Handle

661351307
99009: RNCC: 3 | RNVC: 2

15 Jul 1991

5340-66-137-6005
Mechanical Stop

661376005
114.35.07.072: RNCC: 3 | RNVC: 2

13 May 1993

5340-66-125-3647
Butt Hinge

5340-66-011-7543
Headle Straight Rod

5340-66-048-0381
Butt Hinge

5340-66-033-9923
Nonmetallic Bumper

5340-66-065-1431
Double Angle Bracket

660651431
DSD587-1: RNCC: 3 | RNVC: 2

20 Jan 1974

5340-66-070-5491
Catch

660705491
71446-1: RNCC: 3 | RNVC: 2

25 Jul 1974

5340-66-160-3216
Mounting Bracket

661603216
NALM00826-1: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-66-157-6641
Extension Drawer Slide

661576641
2233579: RNCC: 3 | RNVC: 2
11000051-15-3-9: RNCC: 5 | RNVC: 2
11000051-15-3-9: RNCC: 5 | RNVC: 9

4 Feb 2009

5340-66-065-7816
Filter Top Cap

660657816
AJ42DM: RNCC: 3 | RNVC: 2

21 Jun 1974

5340-66-145-8486
Plug

661458486
863.564.00: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-66-137-2809
Antipilferage Seal Locking Wire

661372809
AEE0709: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-66-078-4944
Door Holder

660784944
12-50162: RNCC: 3 | RNVC: 2

11 Aug 1974

5340-66-140-0598
Insert Bushing

661400598
0110151020000D2: RNCC: 3 | RNVC: 2

31 Oct 1994

5340-66-127-8422
Retaining Strap

661278422
EX20032285: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-66-150-2871
Loop Clamp

661502871
NO PRIMARY REF 66-150-2871: RNCC: 3 | RNVC: 2
01236417: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-146-3522
Battery Clam Plate

661463522
240518B: RNCC: 3 | RNVC: 2
240518B: RNCC: 5 | RNVC: 2

13 Apr 2000

5340-66-155-1606
Access Cover

661551606
5230180011: RNCC: 3 | RNVC: 2
15010103: RNCC: 5 | RNVC: 2

19 Dec 2006

5340-66-160-9488
Mounting Bracket

661609488
BMD-A26-0021-02: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-66-156-9650
Mounting Plate

661569650
50047-37: RNCC: 3 | RNVC: 2

20 Jun 2008

5340-66-142-9803
Adaptor Clip

661429803
015037: RNCC: 3 | RNVC: 2

12 May 1997

5340-66-150-7486
Catch Strike

661507486
30-ASS: RNCC: 3 | RNVC: 2
30-ASS: RNCC: 5 | RNVC: 2

11 Jun 2003

5340-66-159-6452
Mounting Bracket

661596452
043256A-01: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-66-158-5069
Permanent Magnet

661585069
JMS2013-64: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-66-147-8521
Support Wedge

661478521
F/2888-550-051E: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-051E: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-117-3748
Rod End Connector

661173748
DE250150006-1: RNCC: 3 | RNVC: 2

14 Feb 1984

5340-66-139-7259
Access Cover

661397259
6.095.3021: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-66-083-2378
Reinforcing Plate

660832378
TWC: RNCC: 3 | RNVC: 2

9 Feb 1975

5340-66-138-7166
Access Cover

661387166
120370-01402: RNCC: 3 | RNVC: 2

28 Mar 1994

5340-66-126-2653
Access Cover

661262653
6R3-85537-00: RNCC: 3 | RNVC: 2

1 Feb 1991

5340-66-085-5147
Key Blank

660855147
136-34: RNCC: 3 | RNVC: 2

19 Oct 1975

5340-66-059-8161
Mortise Latch Set

660598161
281: RNCC: 3 | RNVC: 2

22 Jun 1973

5340-66-154-5611
Dirt And Liquid Deflector

661545611
008-02072-001: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-66-155-7375
Mounting Plate

661557375
X50RC248: RNCC: 3 | RNVC: 2

17 May 2007

5340-66-155-0859
Dust And Moisture Seal Protective Cap

661550859
SS-050DC: RNCC: 3 | RNVC: 2
187840: RNCC: 5 | RNVC: 2

28 Nov 2006

5340-66-147-2509
Upper Rinse Bracket

661472509
60323: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-66-142-6313
Angle Bracket

661426313
195126: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-66-114-6653
Helical Compression Spring Retainer

661146653
DB1786: RNCC: 3 | RNVC: 2

16 Sep 1983

5340-66-157-3105
Fro Strap Assembly

661573105
1000153: RNCC: 3 | RNVC: 2
1000153: RNCC: 5 | RNVC: 2

7 Oct 2008

5340-66-143-7276
Double Angle Bracket

661437276
658/2/06834/000: RNCC: 3 | RNVC: 2

4 Jul 1997

5340-66-147-8798
Clamp Bracket

661478798
F/2888-575-001B: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-66-148-0577
R'clip

661480577
AGSD819: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-66-153-2706
Mounting Bracket

661532706
A210 0142: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-018-7944
Door Hinge Assembly

660187944
856812R92: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-152-5743
Access Cover

661525743
RP688187: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-66-157-5695
Angle Bracket

661575695
15017095: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-66-146-3687

5340-66-027-7278
Buckle

5340-66-112-3541
Access Cover

661123541
525.14.09.062: RNCC: 3 | RNVC: 2

13 May 1991

5340-66-143-4294
Door Handle

661434294
492461: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-146-2060
Mounting Bracket

661462060
487 0109-26: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-66-124-3316
Gland Assembly

661243316
MGL20L: RNCC: 3 | RNVC: 2

10 May 1985

5340-66-145-2767
Upper Housing

661452767
00-289006: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-66-156-5607
Mechanical Stop

661565607
6302324: RNCC: 3 | RNVC: 2
15012987: RNCC: 5 | RNVC: 2

17 Jan 2008

5340-66-136-4650
Antipilferage Seal

661364650
RCW: RNCC: 3 | RNVC: 2

3 Mar 1993

5340-66-089-2952
Closure Strip

660892952
P1184PC: RNCC: 3 | RNVC: 2

30 Aug 1975

5340-66-150-0751
Expansion Shield

661500751
NO PRIMARY REF 66-150-0751: RNCC: 3 | RNVC: 2
03754609: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-103-4403

5340-66-104-2016
Snap Hook

5340-66-112-5148

5340-66-147-3979
Mounting Bracket

661473979
0616300020: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-66-154-3810
Mounting Bracket

661543810
DE252360007: RNCC: 3 | RNVC: 2

9 May 2006

5340-66-131-5784
Mounting Bracket

661315784
3285375R1: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-66-159-1778
Mortise Lock Set

661591778
A/HF1A/02/6L/-F1: RNCC: 3 | RNVC: 2
A/HF1A/02/6L/-F1: RNCC: 5 | RNVC: 2

22 Mar 2011

5340-66-159-5854
Mounting Bracket

661595854
STS-A05-2003-01: RNCC: 3 | RNVC: 2
STS-A05-2003: RNCC: 7 | RNVC: 2

14 Oct 2011

5340-66-158-2854
Clamping Catch

661582854
HYL9103: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-66-146-3545
Webbing Strap

661463545
240382A-20: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-139-0261
Mounting Plate

661390261
640/2/28283: RNCC: 3 | RNVC: 2

11 Feb 1994

5340-66-161-1696
Cushioning Pad

661611696
15009198: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-157-0909
Dust And Moisture Seal Protective Cap

661570909
20X-30-21141: RNCC: 3 | RNVC: 2
20X-30-21141: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-66-024-1696
Rim Lock

660241696
600S14: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-5644
Mounting Plate

661565644
7512103: RNCC: 3 | RNVC: 2
15012887: RNCC: 5 | RNVC: 2

17 Jan 2008

5340-66-160-3243
Mounting Bracket

661603243
BP5685619: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-66-128-0289
Bracket

661280289
576.10.09.152: RNCC: 3 | RNVC: 2

30 Mar 1996

5340-66-137-2738
General Purpose Resilient Mount

661372738
P471-90200-101-T12: RNCC: 3 | RNVC: 2

27 Oct 1992

5340-66-149-4237

5340-66-160-3319
Mounting Plate

661603319
BMP-A05-2030-01: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-66-153-7072
Retaining Strap

661537072
47120117722-015: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-66-160-9637
Dust And Moisture Seal Protective Cap

661609637
038670A-00: RNCC: 3 | RNVC: 2

25 Mar 2013

5340-66-160-6536
Mounting Bracket

661606536
ID25-238: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-155-8455
Mechanical Stop

661558455
471-51805-127: RNCC: 3 | RNVC: 2
504287: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-156-9166
Mounting Bracket

661569166
BMA-A05-1667-01: RNCC: 3 | RNVC: 2

30 May 2008

5340-66-154-7055
Retaining Band

661547055
471-51811-13: RNCC: 3 | RNVC: 2
510477: RNCC: 5 | RNVC: 2

17 Aug 2006

5340-66-135-2219
Catch Plate

661352219
C144ZP: RNCC: 3 | RNVC: 2

2 Oct 1991

5340-66-021-7170
Nonmetallic Bumper

660217170
857504R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-033-7658
Handle Grip

660337658
363-30SH1PCE4: RNCC: 3 | RNVC: 2
263-30E4: RNCC: 5 | RNVC: 2

31 Oct 1969

5340-66-018-1311
Angle Bracket

660181311
PGAP23: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-161-1956
Webbing Strap

661611956
BP5685481: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-66-152-8023
Clip Assembly

661528023
EQ042: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-66-154-7048
Multiple Angle Bracket

661547048
471-51806-102: RNCC: 3 | RNVC: 2
504317: RNCC: 5 | RNVC: 2

17 Aug 2006

5340-66-085-5160
Padlock

660855160
245B: RNCC: 3 | RNVC: 2
04074304: RNCC: 5 | RNVC: 2

4 Mar 1976

5340-66-088-1818
Butt Hinge

660881818
1213-251232: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-140-2748
Spring Tension Clip

661402748
215-502125: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-66-091-2064
Synchro Clamp

660912064
E117A27589: RNCC: 3 | RNVC: 2

18 Dec 1975

5340-66-063-9359
Dust And Moisture Seal Protective Cap

660639359
742: RNCC: 3 | RNVC: 1

30 Sep 1973

5340-66-072-1774
Barrel Bolt

660721774
572: RNCC: 3 | RNVC: 2
WCJ0050: RNCC: 5 | RNVC: 2

5 Jul 1974

5340-66-155-6072
Loop Clamp

661556072
56485: RNCC: 3 | RNVC: 2
NARV56485: RNCC: 5 | RNVC: 2

24 Apr 2007

5340-66-153-4080
Mounting Plate

661534080
15012779-01: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-126-2164
Manual Control Handle

661262164
OM0-142394-13: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-66-158-2237
Bow Handle

661582237
K11477-263: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-66-141-2170
Door Handle

661412170
88.5905.0250: RNCC: 3 | RNVC: 2

1 Nov 1995

5340-66-147-2594
Panel

661472594
DAP175L: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-148-3999
Seal Retainer

661483999
M48-0236D01: RNCC: 3 | RNVC: 2
1520738: RNCC: 5 | RNVC: 2

15 Mar 2002

5340-66-146-1967
Mounting Bracket

661461967
472 7412-02: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-134-9257
Clamping Catch

661349257
400114000L: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-66-086-8229
Hand Crank

660868229
ADE(M)534-62: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-161-1584
Angle Bracket

661611584
15017827: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-66-144-6176
Webbing Strap

661446176
11-240503B-90: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-66-037-2758
Double Angle Bracket

660372758
EDE277: RNCC: 3 | RNVC: 2

14 Sep 1970

5340-66-123-2852
Webbing Strap

661232852
21-99315: RNCC: 3 | RNVC: 2

19 Nov 1985

5340-66-159-7676
Caster Wheel

661597676
AG112BP WHEELS: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-66-146-3528
Strap

661463528
00-240545B-100: RNCC: 3 | RNVC: 2
240545B-100: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-144-3590
Stand Base

661443590
RWC 6553/002: RNCC: 3 | RNVC: 2

9 Oct 1998

5340-66-152-4897
Mounting Bracket

661524897
DE251680001: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-66-147-2599
Cover

661472599
927048: RNCC: 3 | RNVC: 2
DAP6929: RNCC: 5 | RNVC: 9

13 Dec 2000

5340-66-159-8415
Handle Grip

661598415
3952080023: RNCC: 3 | RNVC: 2
SP98143: RNCC: 5 | RNVC: 2

1 Mar 2012

5340-66-140-5722
Webbing Strap

661405722
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
BR35-1-2.5M: RNCC: 3 | RNVC: 2
004-126-1: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-66-128-5178
Nonmetallic Bumper

661285178
MWC6291: RNCC: 3 | RNVC: 2
MWC6291: RNCC: 5 | RNVC: 2

21 Sep 1988

5340-66-152-5050
Mounting Plate

661525050
DE530070000: RNCC: 3 | RNVC: 2

1 Mar 2005

5340-66-149-0933
Friction Catch Stud Receptacle

661490933
15000321: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-66-128-1972
Webbing Strap

661281972
1505: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

28 Jan 1987

5340-66-130-1798
Slide Cocking Grip

661301798
20295: RNCC: 3 | RNVC: 2

15 Feb 1988

5340-66-118-4474
Dust And Moisture Seal Boot

661184474
N 6557: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-66-158-7159
Mounting Bracket

661587159
8008-0052: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-66-132-1648
Hand Crank

661321648
S6202-74031 PC 60: RNCC: 3 | RNVC: 2

21 Jun 1989

5340-66-128-3432
Nonmetallic Bumper

5340-66-128-3431
Nonmetallic Bumper

5340-66-138-7446
Mounting Bracket

661387446
196630-06761: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-66-147-9495
Pressure Compensato

661479495
65-0401L: RNCC: 3 | RNVC: 2

8 Feb 2002

5340-66-153-4375
General Purpose Resilient Mount

661534375
3110067: RNCC: 3 | RNVC: 2
3110067: RNCC: 5 | RNVC: 2

18 Aug 2005

5340-66-147-9586
Swivel Caster

661479586
L65723SLS2: RNCC: 3 | RNVC: 2

16 Jul 2002

5340-66-156-0070
Lock-Release Lever

661560070
A7-10-351-75: RNCC: 3 | RNVC: 2
1371060: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-66-068-6663
Coat And Hat Hook

660686663
NO PRIMARY REF 66-068-6663: RNCC: 3 | RNVC: 2
56471: RNCC: 5 | RNVC: 2
G73CPB: RNCC: 5 | RNVC: 2

21 Jun 1974

5340-66-151-3897
Retaining Strap

661513897
630A00054-000-01: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-66-149-8388
Coat And Hat Hook

661498388
NO PRIMARY REF 66-149-8388: RNCC: 3 | RNVC: 2
00552257: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-66-158-0086
Manual Control Lever

661580086
JMS2002-52: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-036-9897
Angle Bracket

660369897
EDE167: RNCC: 3 | RNVC: 2

28 Aug 1970

5340-66-128-1291
Mounting Bracket

661281291
DE610100003: RNCC: 3 | RNVC: 2

20 Nov 1986

5340-66-088-4477
Door Handle

660884477
DL053: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-158-1628
Rear Module Slide T

661581628
P10366-15-01: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-66-157-5438
Vent Plug

661575438
100811: RNCC: 3 | RNVC: 2
100811: RNCC: 5 | RNVC: 2

15 Dec 2008

5340-66-158-6432
Electronic Equipment Hardware Kit

661586432
RM-DXC30: RNCC: 3 | RNVC: 2
RM-DXC30: RNCC: 5 | RNVC: 2

6 May 2010

5340-66-143-0990
Mortise Lock

661430990
630-000: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-017-9846
Dust And Moisture Seal Protective Plug

660179846
CA30092-972: RNCC: 3 | RNVC: 2
GS195-17: RNCC: 3 | RNVC: 2

18 Dec 1960

5340-66-141-0830
Dust And Moisture Seal Boot

661410830
EN6: RNCC: 3 | RNVC: 2

31 Aug 1995

5340-66-123-2655
Webbing Strap

661232655
DE580180755: RNCC: 3 | RNVC: 2

7 Nov 1985

5340-66-158-6777
Angle Bracket

661586777
RAY184003-3: RNCC: 3 | RNVC: 2
RAY184007-3: RNCC: 3 | RNVC: 2
RAY184003-3: RNCC: 5 | RNVC: 2
RAY184007-3: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-067-6836
Retaining Clip

660676836
ADD(A)23-2: RNCC: 3 | RNVC: 2
V6VFA0006: RNCC: 5 | RNVC: 9

20 Jul 1974

5340-66-032-5492
Clamp Bolt Assembly

660325492
1144-8PC4-5-6-7: RNCC: 3 | RNVC: 2

1 Oct 1969

5340-66-158-6272
Mounting Bracket

661586272
DE253530055: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-66-128-5675
General Purpose Resilient Mount

661285675
MYH3501: RNCC: 3 | RNVC: 2

14 Aug 1989

5340-66-152-3658
Mounting Bracket

661523658
15005591: RNCC: 3 | RNVC: 2

30 Sep 2004

5340-66-156-7564
Access Cover

661567564
S3253126: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-66-147-9416
Male Camlock To Hos

661479416
AE065: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-146-1593
Worm Gear Casing

661461593
850510: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-66-124-7477
Cabine Lock Key Set

661247477
SZ2549: RNCC: 3 | RNVC: 2
SZ2549: RNCC: 5 | RNVC: 2
SZ2549: RNCC: 5 | RNVC: 2

13 Nov 1985

5340-66-148-9087
Handle Grip

661489087
94A12A-6-017: RNCC: 3 | RNVC: 2
94A12A-6-017: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-66-158-6619
Mounting Plate

661586619
635-5002: RNCC: 3 | RNVC: 2
1688091: RNCC: 5 | RNVC: 2

19 May 2010

5340-66-040-4724
Electrical-Mechanical Equipment Post

660404724
SP469: RNCC: 3 | RNVC: 2

7 May 1971

5340-66-038-2525
Angle Bracket

660382525
B48361B: RNCC: 3 | RNVC: 2

4 Dec 1970

5340-66-142-4434
Webbing Strap

661424434
1435218: RNCC: 3 | RNVC: 2

31 Jul 1996

5340-66-154-8687
Mounting Plate

661548687
HFA0231P18: RNCC: 3 | RNVC: 2
HFA0231P18: RNCC: 5 | RNVC: 2

22 Sep 2006

5340-66-104-1354
Angle Bracket

661041354
2B2-10-29: RNCC: 3 | RNVC: 2

12 Feb 1971

5340-66-157-8114
Dust And Moisture Seal Protective Plug Set

661578114
120311: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-66-158-9032
Mounting Bracket

661589032
MD777: RNCC: 3 | RNVC: 2

11 Oct 2010

5340-66-153-6045
Mounting Bracket

661536045
571.10.09.158: RNCC: 3 | RNVC: 2

26 Sep 2005

5340-66-154-8552
Mounting Bracket

661548552
15010470: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-153-9968
Emergency Safety Tr

661539968
AS3790: RNCC: 3 | RNVC: 1
84200: RNCC: 3 | RNVC: 2

17 Jan 2006

5340-66-155-8391
Runner

661558391
471-50809-144: RNCC: 3 | RNVC: 2
502578: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-149-2676
Permanent Magnet

661492676
NO PRIMARY REF 66-149-2676: RNCC: 3 | RNVC: 2
86584893: RNCC: 5 | RNVC: 2

24 Mar 2003

5340-66-158-7719
Mounting Plate

661587719
P10193-01-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-086-4426
Retainer

660864426
16-8W0012-15: RNCC: 3 | RNVC: 2

12 Jun 1976

5340-66-029-4531
Machine Plug

660294531
GEF193: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-103-4707
Resilient Mount Plate

661034707
GILV106: RNCC: 3 | RNVC: 2

23 May 1970

5340-66-085-8678
Plain Solid Disk

660858678
NO PRIMARY REF 66-085-8678: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-139-4438
Mounting Bracket

661394438
DE250530162: RNCC: 3 | RNVC: 2

13 Dec 1994

5340-66-157-6328
Mounting Bracket

661576328
DE253280078-1: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-66-161-0072
Stanchion Assembly

661610072
AM11021-2: RNCC: 3 | RNVC: 2

16 Apr 2013

5340-66-113-6646
Protective Tooling

661136646
TOOLING FOR 5340-66-101-5713: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-157-3414
Retaining Strap

661573414
1100420: RNCC: 3 | RNVC: 2
1000420: RNCC: 5 | RNVC: 2

14 Oct 2008

5340-66-135-3816
Loop Clamp

661353816
532.11.09.156: RNCC: 3 | RNVC: 2
532.11.09.035: RNCC: 5 | RNVC: 9
532.11.09.154: RNCC: 5 | RNVC: 9

1 Aug 1991

5340-66-153-4194
Mounting Plate

661534194
15013084: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-159-5828
Retaining Strap

661595828
MCR102160000: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-66-158-5718
Mounting Plate

661585718
150 18864: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-66-017-4729
Dust And Moisture Seal Boot

660174729
881058R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-7193
General Purpose Resilient Mount

661607193
SMB00604009: RNCC: 3 | RNVC: 2
10006947-17: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-66-153-2678
Mounting Bracket

661532678
A210 0288: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-150-8801
General Purpose Resilient Mount

661508801
DE251240014: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-66-143-9561
Dust And Moisture Seal Protective Plug

661439561
20993: RNCC: 3 | RNVC: 2

25 Nov 1997

5340-66-150-0252
Swivel Caster

661500252
NO PRIMARY REF 66-150-0252: RNCC: 3 | RNVC: 2
04794309: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-156-2668
Mechanical Stop

661562668
471-50429-112T01: RNCC: 3 | RNVC: 2
503101: RNCC: 5 | RNVC: 2

11 Oct 2007

5340-66-148-6793
Caster Jack Spring

661486793
FE-10466-003: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-66-158-3553
Butt Hinge

661583553
E6-10-208-50: RNCC: 3 | RNVC: 2
DF01-602-11: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-66-133-5213
Electronic Equipment Hardware Kit

661335213
418/5/52546/000: RNCC: 3 | RNVC: 2
CES13384: RNCC: 3 | RNVC: 2
MX-F112: RNCC: 5 | RNVC: 2

23 Oct 1989

5340-66-156-0208
Mounting Bracket

661560208
ARLM0588-1: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-66-156-5542
Mounting Bracket

661565542
BMA-A05-0666-01: RNCC: 3 | RNVC: 2

15 Jan 2008

5340-66-147-9276
Dust And Moisture Seal Protective Cover

661479276
MH-A593-0121-01: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-66-156-5615
Access Cover

661565615
7512209: RNCC: 3 | RNVC: 2
15013020: RNCC: 5 | RNVC: 2

17 Jan 2008

5340-66-110-5650
Mounting Bracket

661105650
NRB010: RNCC: 3 | RNVC: 2

14 Apr 1981

5340-66-116-8758
Barrel Bolt

661168758
BOLT BARREL: RNCC: 3 | RNVC: 1

28 Jun 1983

5340-66-129-9366
Clip

661299366
F4071: RNCC: 3 | RNVC: 2

5 Jun 1987

5340-66-089-5313
Angle Bracket

5340-66-098-4913
Loop Clamp

5340-66-089-6291

5340-66-021-4990
Spring Tension Clip

660214990
ADE(A)29-42: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-158-4012
Bolt And Spacer Kit

661584012
AG-Z000F: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-66-150-2030
Support Hook

661502030
NO PRIMARY REF 66-150-2030: RNCC: 3 | RNVC: 2
04057907: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-139-9589
General Purpose Resilient Mount

661399589
GB530-NR2-M20-FM: RNCC: 3 | RNVC: 2
35 59787: RNCC: 3 | RNVC: 2
GB530-NR2-M20-FM: RNCC: 5 | RNVC: 2

5 Oct 1994

5340-66-113-6647
Protective Tooling

661136647
TOOLING FOR 5340-66-5714: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-135-6229
Mounting Bracket

661356229
EB1: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-66-158-4650
Webbing Strap

661584650
HYG2670: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-66-145-5218
Float Valve Kit Min

661455218
SP6593A: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-66-157-4241
Dust And Moisture Seal Protective Cap

661574241
CP16: RNCC: 3 | RNVC: 2
15017540: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-66-128-0286
Mounting Bracket

661280286
DO104: RNCC: 3 | RNVC: 2
DA95122000: RNCC: 3 | RNVC: 2
DA95122000-1: RNCC: 3 | RNVC: 2

24 May 1996

5340-66-100-8987
Rim Lock

661008987
HYG1113: RNCC: 3 | RNVC: 2

16 Mar 1979

5340-66-087-7402
Grooved Clamp Coupling Ferrule

660877402
1213-2141183: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-128-4121
Loop Clamp

661284121
A13240: RNCC: 3 | RNVC: 2

27 May 1987

5340-66-150-0756
Expansion Shield

661500756
NO PRIMARY REF 66-150-0756: RNCC: 3 | RNVC: 2
01820807: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-155-3951
Mounting Plate

661553951
DE252540041: RNCC: 3 | RNVC: 2

21 Mar 2007

5340-66-147-8873
Mounting Bracket

661478873
F/2888-570-007C: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-66-158-2367
Mounting Plate

661582367
BMU-A18-3023-01: RNCC: 3 | RNVC: 2
BMU-A18-3023: RNCC: 5 | RNVC: 2

8 Oct 2009

5340-66-157-2885
Mounting Bracket

661572885
10027684: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-66-157-0656
Loop Clamp

661570656
BYG 2061: RNCC: 3 | RNVC: 2

15 Jul 2008

5340-66-156-5020
Mechanic Equipment Hardware Kit

661565020
DA 012: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-66-159-1341
Mounting Plate

661591341
BDI 30400-3-2-2S: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-66-157-6357
Mounting Bracket

661576357
DE253280001: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-66-157-6258
Clamp Bolt Assembly

661576258
16418: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-66-160-8039
Mounting Plate

661608039
90-3001-04: RNCC: 3 | RNVC: 2

18 Dec 2012

5340-66-122-6467
Bracket

661226467
DE580180212-1: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-66-077-9360
Buckle

660779360
224: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-038-5292
Buckle

660385292
ADE(M)183-44: RNCC: 3 | RNVC: 2

17 Feb 1971

5340-66-113-6657
Protective Tooling

661136657
TOOLING FOR 5340-66-101-5724: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-157-4072
Angle Bracket

661574072
468-00-0203W2: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-66-155-6396
Mechanical Stop

661556396
471-90429-619: RNCC: 3 | RNVC: 2
521585: RNCC: 5 | RNVC: 2

1 May 2007

5340-66-157-6368
Mounting Plate

661576368
DE253280014: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-66-087-7288
Butt Hinge

660877288
1213-265251: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-154-3012
Lock Key

661543012
8G800D711-33-7: RNCC: 3 | RNVC: 2
B9902HZ: RNCC: 3 | RNVC: 2
B9902HZ: RNCC: 5 | RNVC: 2

19 Apr 2006

5340-66-161-1489
Manual Control Handle

661611489
52396M: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-66-140-6139
Seal Assembly

661406139
004-549: RNCC: 3 | RNVC: 2

10 Nov 1995

5340-66-156-5277
Access Cover

661565277
CDA-A19-2009-01: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-66-056-0273
Electronic Equipment Hardware Kit

660560273
56262A: RNCC: 3 | RNVC: 2
069-040: RNCC: 5 | RNVC: 2

26 Oct 1972

5340-66-147-8817
Strap Assembly

661478817
F/2888-575-002B: RNCC: 3 | RNVC: 2
Q EDE F/2888-575-002B: RNCC: 5 | RNVC: 2

27 Nov 2001

5340-66-031-0425
Angle Bracket

660310425
C8381: RNCC: 3 | RNVC: 2

26 Aug 1969

5340-66-140-6754
Electronic Equipment Hardware Kit

661406754
DE530020031: RNCC: 3 | RNVC: 2
DE530020031: RNCC: 3 | RNVC: 2
MX-F149: RNCC: 5 | RNVC: 2

1 Mar 1996

5340-66-156-6298
Liquid Holding Unit Filler Neck

661566298
AC149: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-66-155-6412
Loop Clamp

661556412
8016012: RNCC: 3 | RNVC: 2
5554-8016012: RNCC: 5 | RNVC: 2

1 May 2007

5340-66-155-8406
Retaining Band

661558406
471-50809-21T01: RNCC: 3 | RNVC: 2
502657: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-138-0845
Swag Magnet Assembl

661380845
49A: RNCC: 3 | RNVC: 2
F55 1/4 UNF RF Z/P EYE: RNCC: 3 | RNVC: 2

1 Oct 1993

5340-66-156-2430
Angle Bracket

661562430
A2100255-2: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-66-050-8359
Hi Fitting Assembly

660508359
C4WM1117-3: RNCC: 3 | RNVC: 2

20 May 1972

5340-66-161-2096
Mounting Bracket

661612096
054758A-00: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-66-147-2611
Rinse Lever

661472611
DAS489S(MOD.SX): RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-146-1372
Mounting Bracket

661461372
TYPE V11(02)(STBDAFT): RNCC: 3 | RNVC: 2

28 Jan 2000

5340-66-155-6726
Access Cover

661556726
146713-4: RNCC: 3 | RNVC: 2

7 May 2007

5340-66-157-8618
Dust And Moisture Seal Boot

661578618
MILC-0171: RNCC: 3 | RNVC: 2
P811021: RNCC: 5 | RNVC: 2

24 Apr 2009

5340-66-159-7606
Dust And Moisture Seal Protective Cover

661597606
BMA-A13-0081-01: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-66-138-6332
Mounting Bracket

661386332
B831F339/22: RNCC: 3 | RNVC: 2

25 Feb 1994

5340-66-158-0249
Mortise Latch

661580249
7FA1290A01M03: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-66-094-0395
Butt Hinge

660940395
0838: RNCC: 3 | RNVC: 1
L620: RNCC: 5 | RNVC: 1

14 May 1978

5340-66-025-2292
Catch Strike

660252292
886588R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-158-3048
Dust And Moisture Seal Protective Cover

661583048
HYG3528: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-66-156-5580
Mounting Plate

661565580
6302224: RNCC: 3 | RNVC: 2
15012912: RNCC: 5 | RNVC: 2

16 Jan 2008

5340-66-118-6708
Dust And Moisture Seal Boot

661186708
F745-324330: RNCC: 3 | RNVC: 2
324330: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 May 1984

5340-66-160-3969
Retaining Strap

661603969
15005551-0280: RNCC: 3 | RNVC: 2

10 Jul 2012

5340-66-133-2830
Mounting Bracket

661332830
ATS101018: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-66-150-7435
Mounting Bracket

661507435
BDI 11203: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-66-147-8969
Tensionerer Sleeve

661478969
2888-520-001-ITEM 20: RNCC: 3 | RNVC: 2
435 612 76 30: RNCC: 5 | RNVC: 2

5 Dec 2001

5340-66-154-7564
Filler Opening Cap

661547564
DX7968: RNCC: 3 | RNVC: 2

29 Aug 2006

5340-66-060-8158
Dust And Moisture Seal Protective Cap-Plug

660608158
17CP: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-66-035-4995
Retaining Strap

5340-66-154-7875
Produc Bin Assembly

661547875
15004444: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-66-148-3928
Cover

661483928
C11184: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-156-0219
Webbing Strap

661560219
471-22204-405: RNCC: 3 | RNVC: 2
521931: RNCC: 5 | RNVC: 2

25 Jul 2007

5340-66-156-0603
Manual Control Lever

661560603
92-41-531: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-66-139-0163
Bush

661390163
303/C: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-66-155-6581
Manual Control Lever

661556581
217-68-237: RNCC: 3 | RNVC: 2

3 May 2007

5340-66-143-2786
Blank Panel

661432786
0705-0002: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-66-158-5739
Seal Retaining Plate

661585739
P10215-05-03: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-66-151-1970
Track Stop

661511970
ARLM0475-3: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-66-160-7107
General Purpose Access Door

661607107
15016400: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-66-147-2740
Strainer

661472740
DZF32: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-147-2810
Reducing Bush

661472810
80470: RNCC: 3 | RNVC: 2

25 Jan 2001

5340-66-144-4550
Doorknob

661444550
F8004: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-66-158-4499
Webbing Strap

661584499
19182015: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-66-138-9778
General Purpose Resilient Mount

661389778
FAP SPECIAL: RNCC: 3 | RNVC: 2
845028: RNCC: 3 | RNVC: 2
DE410090118: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-66-135-7151
Block Clamp

661357151
90461-10116: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-66-066-4296
Angle Bracket

5340-66-137-9086
Blank Panel

661379086
501AMR135: RNCC: 3 | RNVC: 2

1 Jun 1993

5340-66-139-7413
Access Cover

661397413
4NX1030: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-66-160-8396
Mounting Plate

661608396
BMA-A26-0213-01: RNCC: 3 | RNVC: 2

31 Jan 2013

5340-66-045-3362
Evaporator Do Hinge

660453362
93352: RNCC: 3 | RNVC: 2

4 Jan 1972

5340-66-065-4528
General Purpose Resilient Mount

660654528
1946-66: RNCC: 3 | RNVC: 2

12 Dec 1973

5340-66-147-4180
Mounting Plate

661474180
CX25-1-M41-0: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-034-7021
Access Cover

660347021
3-26: RNCC: 3 | RNVC: 2

3 Feb 1960

5340-66-132-5621
Dust And Moisture Seal Protective Cap

661325621
NA-8: RNCC: 3 | RNVC: 2
NA-8: RNCC: 5 | RNVC: 2

17 Mar 1989

5340-66-146-3902
Lever Arm

661463902
73221-3-27: RNCC: 3 | RNVC: 2

27 Apr 2000

5340-66-156-0213
Nut And Bolt Retainer

661560213
ARLM0618-1: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-66-025-8194
Expansion Plug

5340-66-147-2549
Rinse Tank

661472549
DAB27: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-144-8510

5340-66-135-5015
Manual Contr Handle

5340-66-025-0427
Loop Clamp

5340-66-158-3434
Access Cover

661583434
30V-06-0066-030: RNCC: 3 | RNVC: 2

19 Nov 2009

5340-66-155-8403
Catch Strike

661558403
471-40204-160: RNCC: 3 | RNVC: 2
514996: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-110-5558
Double Angle Bracket

661105558
446D2114-089: RNCC: 3 | RNVC: 2

14 Apr 1981

5340-66-157-3848
Access Cover

661573848
AG-A0305: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-66-157-7830
Mounting Plate

661577830
BMA-A05-1599-01: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-66-108-4967
Bail Handle

661084967
015M031-010: RNCC: 3 | RNVC: 2

29 May 1981

5340-66-160-2220
Mounting Plate

661602220
BMP-A05-2021-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-131-5116
Crank Handle

661315116
MC/0001: RNCC: 3 | RNVC: 2

16 Nov 1988

5340-66-125-2730
Webbing Strap

661252730
DE580180769-4: RNCC: 3 | RNVC: 2

6 May 1986

5340-66-150-0654
Padlock

661500654
NO PRIMARY REF 66-150-0654: RNCC: 3 | RNVC: 2
03380984: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-123-8396
Retaining Strap

661238396
024AMR068-1: RNCC: 3 | RNVC: 2
024AMR068-1: RNCC: 5 | RNVC: 2

8 Sep 1998

5340-66-131-4492
Loop Clamp

661314492
264231C1: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-66-161-2646
Butt Hinge

661612646
1600-02-0204C1-01-P1: RNCC: 3 | RNVC: 2
QVRL1600020204C101P1: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-151-0797
Hand Crank

661510797
MC-1906: RNCC: 3 | RNVC: 2

20 May 2003

5340-66-089-6465

5340-66-084-9518

5340-66-159-8870
Mounting Plate

661598870
BMA-A14-0528-01: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-66-150-2865
Loop Clamp

661502865
NO PRIMARY REF 66-150-2865: RNCC: 3 | RNVC: 2
02250953: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-150-5772
General Purpose Resilient Mount

661505772
NO PRIMARY REF 66-150-5772: RNCC: 3 | RNVC: 2
08729804: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-160-4893
Mounting Bracket

661604893
P10488-200: RNCC: 3 | RNVC: 2

17 Aug 2012

5340-66-126-2248
Rod End Connector

661262248
661-41262-02: RNCC: 3 | RNVC: 2

19 Dec 1990

5340-66-156-4711
Mounting Bracket

661564711
15015100: RNCC: 3 | RNVC: 2

4 Dec 2007

5340-66-149-1008
Retaining Strap

661491008
124320950: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-66-142-8838
Webbing Strap

661428838
DE580676405: RNCC: 3 | RNVC: 2

5 Jun 1997

5340-66-123-1704
Rubber Mounting

661231704
435 616 72 20: RNCC: 3 | RNVC: 2

20 Sep 1985

5340-66-040-6500
Spring Retainer

660406500
63C41423-2: RNCC: 3 | RNVC: 2

14 May 1971

5340-66-155-8981
C Guide

661558981
471-50807-233: RNCC: 3 | RNVC: 2
516939: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-145-5867
Corner Protector

661455867
608/2/57971/000: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-66-151-7847
General Purpose Access Door

661517847
AZ103: RNCC: 3 | RNVC: 2

27 Mar 2004

5340-66-155-9649
Plug Button

661559649
9300388: RNCC: 3 | RNVC: 2

13 Jul 2007

5340-66-161-0962
Mounting Bracket

661610962
434127C: RNCC: 3 | RNVC: 2

4 Jun 2013

5340-66-090-7382
Angle Bracket

5340-66-158-0261
Mortise Latch Set

661580261
7FD8000A45G04: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-66-145-4214
Connector

661454214
FTU 032: RNCC: 3 | RNVC: 2

18 Aug 1999

5340-66-157-4647
Mortise Lock Set

661574647
3571SC: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-045-2974
Angle Bracket

660452974
885376R11: RNCC: 3 | RNVC: 2

16 Jan 1972

5340-66-143-4304
Drain Pipe

661434304
492475-02: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-66-155-1990
Mechanical Stop

661551990
5025415-01: RNCC: 3 | RNVC: 2
5025415-01: RNCC: 5 | RNVC: 2

10 Jan 2007

5340-66-128-6052
Access Cover

661286052
9 122 065 828: RNCC: 3 | RNVC: 2
HYL9497: RNCC: 5 | RNVC: 2

13 May 1991

5340-66-115-7881
Rubber Bumper

661157881
2181: RNCC: 3 | RNVC: 2

23 May 2000

5340-66-157-8442
Mounting Bracket

661578442
F1854ASM497-001: RNCC: 3 | RNVC: 2

16 Apr 2009

5340-66-137-8683
Access Cover

661378683
121000-03020: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-66-151-9702
Extension Handle

661519702
SAWCA-EXT-POLE-SHORT: RNCC: 3 | RNVC: 2

26 May 2004

5340-66-014-7365
Padlock

660147365
234A: RNCC: 3 | RNVC: 2
ARMY (AUST) 6504: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-160-9469
Angle Bracket

661609469
557.21.09.493: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-66-156-4030
Electronic Equipment Hardware Kit

661564030
SCES 20009: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-66-150-0673
Padlock

661500673
NO PRIMARY REF 66-150-0673: RNCC: 3 | RNVC: 2
04854918: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-142-9704
Butt Hinge

661429704
658/2/06174/000: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-143-3232
Plug Handle

661433232
170016: RNCC: 3 | RNVC: 2

9 Apr 1998

5340-66-161-2922
Electronic Equipment Hardware Kit

661612922
SCES20205: RNCC: 3 | RNVC: 2

22 Aug 2013

5340-66-160-1783
Guide Plate

661601783
553.10.09.241: RNCC: 3 | RNVC: 2

23 Apr 2012

5340-66-128-3443
Reversing Latch

5340-66-122-6973
Clamping Catch

5340-66-120-6613
Speaker Bracket

5340-66-121-8104

5340-66-150-0637
Padlock

661500637
NO PRIMARY REF 66-150-0637: RNCC: 3 | RNVC: 2
03381783: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-051-7716
Flush Lock

660517716
R119A: RNCC: 3 | RNVC: 2

19 Aug 1972

5340-66-025-2290
Hood Latch Assembly

660252290
886582R91: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-024-8458
Screw Hook

660248458
M10: RNCC: 3 | RNVC: 2
04056005: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-155-6407
Mounting Bracket

661556407
X50QK464M: RNCC: 3 | RNVC: 2

1 May 2007

5340-66-155-3927
Interlock Arm

661553927
471-41243-304T01: RNCC: 3 | RNVC: 2
512529: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-66-154-7381
Webbing Strap

661547381
10006012-035: RNCC: 3 | RNVC: 2
10006012-035: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-144-6029
Padlock

661446029
226: RNCC: 3 | RNVC: 2

7 Oct 1998

5340-66-122-5375
Bow Handle

5340-66-139-2053
Access Cover

661392053
402KB46AP2: RNCC: 3 | RNVC: 2

27 May 1994

5340-66-129-7656
Spacing Threaded Standoff

661297656
SPA-05-AC-M3-12MM: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-66-159-2330
Bow Handle

661592330
DY-HA-02-0012: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-66-128-5456
Dust And Moisture Seal Protective Plug

661285456
MYH3206: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-66-157-1506
Mounting Bracket

661571506
DA90199004: RNCC: 3 | RNVC: 2

18 Aug 2008

5340-66-161-3640
Barrel Bolt

661613640
04049504: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-66-158-8700
Mounting Bracket

661588700
92818F: RNCC: 3 | RNVC: 2

15 Sep 2010

5340-66-158-0026
Stud Pad

661580026
DE253260002: RNCC: 3 | RNVC: 2

16 Jun 2009

5340-66-067-3007
Expansion Plug

660673007
G2395: RNCC: 3 | RNVC: 2
W2ISEG2395: RNCC: 5 | RNVC: 9

6 Apr 1974

5340-66-068-5246
Vent Plug

660685246
2-8037: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-66-071-6622
Nonmetallic Solid Wheel

660716622
L861: RNCC: 3 | RNVC: 2

11 Aug 1974

5340-66-142-3272
Snap Hook

661423272
RF6511: RNCC: 3 | RNVC: 2
WD2377: RNCC: 3 | RNVC: 2
WD2377: RNCC: 3 | RNVC: 2

31 May 1996

5340-66-148-4003
Foam

661484003
AS 2281-1993 TYPE H: RNCC: 3 | RNVC: 1
H42-500-50MM: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-66-096-5517
Dust And Moisture Seal Protective Cap

660965517
GS195-4F: RNCC: 3 | RNVC: 2
H14866-4F: RNCC: 5 | RNVC: 2

8 Feb 1978

5340-66-142-4626
Mounting Bracket

661424626
471-90423-103T02: RNCC: 3 | RNVC: 2
511258: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-127-6521
Access Cover

661276521
SS22/P075/013/102: RNCC: 3 | RNVC: 2
163P/0325/014: RNCC: 5 | RNVC: 1

11 Nov 1986

5340-66-146-5231
Nut And Bolt Locking Plate

661465231
1375635: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-66-122-8612
Winch Handle

661228612
HP79: RNCC: 3 | RNVC: 2

17 Jun 1985

5340-66-024-2862
Strap End Clip

5340-66-133-2831
Mounting Bracket

661332831
ATS101005: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-66-150-5292
Cleaning Station

661505292
NO PRIMARY REF 66-150-5292: RNCC: 3 | RNVC: 2
00526949: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-150-5301
Antipilferage Seal Locking Wire

661505301
NO PRIMARY REF 66-150-5301: RNCC: 3 | RNVC: 2
00730983: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-019-1507
Access Cover

660191507
62250160: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-144-6057
Webbing Strap

661446057
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503B-50: RNCC: 3 | RNVC: 2
00-240503B-50: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-66-155-8632
Stopping Beam

661558632
471-50812-101: RNCC: 3 | RNVC: 2
503486: RNCC: 5 | RNVC: 2

19 Jun 2007

5340-66-160-2298
Webbing Strap

661602298
BMA-H05-0084-01: RNCC: 3 | RNVC: 2

2 May 2012

5340-66-158-3862
Turnbuckle

661583862
NUTP16JJ: RNCC: 3 | RNVC: 2
NUTP16JJ: RNCC: 5 | RNVC: 2

8 Dec 2009

5340-66-095-5481
S Threaded Standoff

5340-66-148-4217
Loop Clamp

661484217
OED 1749-21-2: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-66-010-9406
Caster Frame

660109406
TSE(V)54-243: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-4614
Webbing Strap

661574614
468-B1-550: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-155-3407
Rod End Connector

661553407
275C-0235: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-66-118-7052
Loop Clamp

661187052
30588-883-000: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-66-159-6525
Mounting Bracket

661596525
042556A-01: RNCC: 3 | RNVC: 2

23 Nov 2011

5340-66-157-4896
Mounting Bracket

661574896
V02-08-01-01-00: RNCC: 3 | RNVC: 2

30 Nov 2008

5340-66-151-8058
Manual Control Handle

661518058
DE251670001: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-156-8619
Mounting Plate

661568619
ARLM0865-1: RNCC: 3 | RNVC: 2

9 May 2008

5340-66-132-6127
Electronic Equipment Hardware Kit

661326127
TMSA215-2: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-156-2539
T Bracket

661562539
A2100209: RNCC: 3 | RNVC: 2

8 Oct 2007

5340-66-144-5272
Mounting Bracket

661445272
A20915 SECT Z-Z: RNCC: 3 | RNVC: 2

7 Dec 1998

5340-66-148-4113
Joint

661484113
H73925-01: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-66-160-2525
Block Clamp

661602525
RCS-28: RNCC: 3 | RNVC: 2
RCS-28: RNCC: 5 | RNVC: 2

9 May 2012

5340-66-090-9173
Ladder Safety Shoe

660909173
MLF14: RNCC: 3 | RNVC: 2

5 Dec 1975

5340-66-147-1073
Mounting Bracket

661471073
015198: RNCC: 3 | RNVC: 2

15 Feb 2001

5340-66-154-9320
Mounting Bracket

661549320
15013551: RNCC: 3 | RNVC: 2

11 Oct 2006

5340-66-155-3377
Double Angle Bracket

661553377
DE252540044: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-66-139-0665
Clamping Piece

661390665
YA4355220020: RNCC: 3 | RNVC: 2

18 Feb 1994

5340-66-152-3781
As Extended Bracket

661523781
DE251940012: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-094-0167
Mounting Bracket

660940167
2406: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-154-7905
Mounting Bracket

661547905
15006389: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-66-139-1577
Electronic Equipment Hardware Kit

661391577
MX-F122: RNCC: 3 | RNVC: 2
DE530020011: RNCC: 3 | RNVC: 2

4 May 1994

5340-66-158-2408
Angle Bracket

661582408
BMU-A18-2004-01: RNCC: 3 | RNVC: 2

8 Oct 2009

Load More Results