What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 12 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 12 of 29

5340-66-134-9518
Access Cover

661349518
DE(EMEI)70-4: RNCC: 3 | RNVC: 2
DE(EMEI)70-4: RNCC: 5 | RNVC: 2

11 Dec 1990

5340-66-125-3249
Butt Hinge

661253249
DE580160115-7: RNCC: 3 | RNVC: 2

29 Apr 1986

5340-66-127-0426
Handwheel

661270426
147A-1209-011: RNCC: 3 | RNVC: 2

30 Jun 1986

5340-66-152-5053
Mounting Bracket

661525053
400052A: RNCC: 3 | RNVC: 2

1 Mar 2005

5340-66-147-0739
Retaining Plate

661470739
DE620050034: RNCC: 3 | RNVC: 2

19 Dec 2000

5340-66-156-4281
Mounting Bracket

661564281
15016402: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-66-104-3773
Anti Roll Restraint

661043773
DA84024000: RNCC: 3 | RNVC: 2

24 Oct 1984

5340-66-027-8326
Loop Clamp

660278326
385175: RNCC: 3 | RNVC: 2
858975R1: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-088-1625
Barrel Bolt

660881625
1213-25103: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-019-3638
Catch Strike

660193638
857117R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-2669
Mechanical Stop

661562669
471-50429-112T02: RNCC: 3 | RNVC: 2
503102: RNCC: 5 | RNVC: 2

11 Oct 2007

5340-66-155-3628
Mounting Plate

661553628
471-40217-122: RNCC: 3 | RNVC: 2
508663: RNCC: 5 | RNVC: 2

13 Mar 2007

5340-66-160-3372
General Purpose Access Door

661603372
BMA-A05-0978-02: RNCC: 3 | RNVC: 2

18 Jun 2012

5340-66-112-3459
Manual Control Lever

661123459
W211-01: RNCC: 3 | RNVC: 2

9 May 1992

5340-66-150-5775
General Purpose Resilient Mount

661505775
NO PRIMARY REF 66-150-5775: RNCC: 3 | RNVC: 2
05951413: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-126-3102
Mounting Plate

661263102
74361: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

23 Jan 1991

5340-66-126-6527
Mounting Bracket

661266527
0313594: RNCC: 3 | RNVC: 2

27 May 1991

5340-66-122-4780
Bolt Side Pa Hinge

661224780
X60RH25: RNCC: 3 | RNVC: 2
X60RH25: RNCC: 3 | RNVC: 2

26 Sep 1984

5340-66-021-6508
General Purpose Resilient Mount

660216508
FBFL/S2: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-123-1684
Bumper

661231684
YA 000 987 00 39: RNCC: 3 | RNVC: 2
YA 000 987 00 39: RNCC: 5 | RNVC: 2

30 Sep 1985

5340-66-150-8799
Mounting Bracket

661508799
DE251240007-1: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-66-049-6849
Angle Bracket

660496849
ADE(V)97-100-1: RNCC: 3 | RNVC: 2

8 May 1972

5340-66-147-2333
Connector

661472333
007/501/GMOWS.3030.2.02: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-138-9659
Dust And Moisture Seal Boot

661389659
4547926010: RNCC: 3 | RNVC: 2
0056547926010: RNCC: C | RNVC: 1

2 Dec 1993

5340-66-154-4685
Dust And Moisture Seal Protective Cap-Plug

661544685
CP502: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-66-146-4065
Mounting Bracket

661464065
HYH 3498: RNCC: 3 | RNVC: 2

15 May 2000

5340-66-139-1500
Block Clamp

661391500
MEA 1754-2/1: RNCC: 3 | RNVC: 2

10 May 1994

5340-66-155-7382
Double Angle Bracket

661557382
471-20207-430: RNCC: 3 | RNVC: 2
510358: RNCC: 5 | RNVC: 2

17 May 2007

5340-66-153-2689
Mounting Bracket

661532689
A210 0292: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-117-0996
Rope Cleat

661170996
ROPE CLEAT: RNCC: 3 | RNVC: 2

14 Jun 1983

5340-66-031-1838
Runner

660311838
TSU48: RNCC: 3 | RNVC: 2

22 Feb 1969

5340-66-157-2115
Mechanical Stop

661572115
TR-06-1-117: RNCC: 3 | RNVC: 2

4 Sep 2008

5340-66-131-5327
Bail Handle

661315327
506891C1: RNCC: 3 | RNVC: 2

3 Dec 1988

5340-66-129-8584
Mounting Bracket

661298584
553.10.09.392: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-66-153-8356
Aviation Drum Spear

661538356
MTC-3132: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-66-156-5999
Helical Compression Spring Retainer

661565999
P10009-12-8: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-66-026-3715
Helical Compression Spring Seat

660263715
122135271: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-027-9753
Access Cover

660279753
100-855: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-118-7124
Dust And Moisture Seal Boot

661187124
8MY331A: RNCC: 3 | RNVC: 2
8MY331: RNCC: 5 | RNVC: 9

4 Apr 1984

5340-66-154-6372
Access Cover

661546372
6-160-3027: RNCC: 3 | RNVC: 2
6-160-3027: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-154-9459
Mounting Bracket

661549459
1 221 275: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-66-129-8244
Retainer Delrin Bbp

661298244
NALM00020-1: RNCC: 3 | RNVC: 2
NALM00020-1: RNCC: 5 | RNVC: 1

19 Oct 2000

5340-66-160-9300
Strap Fastener Loop

661609300
10000129-4: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-66-156-0207
Mounting Bracket

661560207
ARLM0587-1: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-66-131-6860
Hinge Assembly

661316860
3212698R91: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-159-5439
Mounting Plate

661595439
9232 0311 60: RNCC: 3 | RNVC: 2
9232 0311 60: RNCC: 5 | RNVC: 2

12 Sep 2011

5340-66-123-8496
Rod End Connector

5340-66-123-3406

5340-66-160-4736
Angle Bracket

661604736
119.40.07.079: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-66-146-1013
Pipe Small

661461013
NC5: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-145-8378
Plug

661458378
006.056.20: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-66-156-1050
Webbing Strap

661561050
CLVGSUN3: RNCC: 3 | RNVC: 2

28 Aug 2007

5340-66-038-5415
Ge Mounting Bracket

660385415
E1835: RNCC: 3 | RNVC: 2

18 Dec 1970

5340-66-144-7264
Strap Hinge Leaf

661447264
MHC1123-1: RNCC: 3 | RNVC: 2

8 Jan 1999

5340-66-116-6047
Door Handle

661166047
393: RNCC: 3 | RNVC: 2

11 Oct 1983

5340-66-150-5809
Key Holder

661505809
NO PRIMARY REF 66-150-5809: RNCC: 3 | RNVC: 2
04069102: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-6059
Top Plate

661546059
008-01953-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-143-1464
Dust And Moisture Seal Protective Cover

661431464
138100 16440 K 0001/17: RNCC: 3 | RNVC: 2
9051460584: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-158-1421
Mounting Plate

661581421
H112567: RNCC: 3 | RNVC: 2
H112567: RNCC: 5 | RNVC: 2

3 Sep 2009

5340-66-137-2057
Snap Hook

661372057
H245: RNCC: 3 | RNVC: 2
H323: RNCC: 5 | RNVC: 1
H245: RNCC: 5 | RNVC: 9

2 Oct 1992

5340-66-160-9033
Multiple Angle Bracket

661609033
15020198: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-66-157-6362
Mounting Plate

661576362
DE253280006: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-66-131-5889
Pipe Hanger

661315889
3239672R1: RNCC: 3 | RNVC: 2

17 Dec 1988

5340-66-121-8851
Angle Bracket

661218851
022AMR30: RNCC: 3 | RNVC: 2

25 Feb 1986

5340-66-125-2612
Butt Hinge

661252612
DE580160072-5: RNCC: 3 | RNVC: 2

18 Dec 1985

5340-66-154-8547
Mounting Bracket

661548547
15009928: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-139-0952
Silencer

661390952
164444: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-66-019-5645
Expansion Plug

660195645
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-155-4134
Handwheel

661554134
608-5-46: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-66-143-7484
Rod End Clevis

661437484
VG85525-1M16-2.1030.26: RNCC: 3 | RNVC: 2
VG85525-IM16: RNCC: 5 | RNVC: 2

10 Jul 1997

5340-66-146-1801
Compression Tool

661461801
H70914-CT-1: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-155-4659
Rod End Clevis

661554659
BME-A05-1496-01: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-158-0287
Angle Bracket

661580287
F1854ASM443-002: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-66-159-7701
General Purpose Access Door

661597701
AG112BP INNER DOORS: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-66-161-3075
Rod End Clevis

661613075
PDA HSA005324: RNCC: 3 | RNVC: 2
DWG NO 94 052 1082A ITEM 21: RNCC: 5 | RNVC: 2
HSA005324: RNCC: 5 | RNVC: 2

2 Sep 2013

5340-66-145-9506
Clevis Stay

661459506
F/2888-525-002D: RNCC: 3 | RNVC: 2
Q EDE F/2888-525-002D: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-147-2589
Panel

661472589
DAP170AHO: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-101-4991
Cushioning Pad

661014991
58-187SH1ITEM10: RNCC: 2 | RNVC: 2

24 Apr 1979

5340-66-159-2434
Manual Control Lever

661592434
MC-23000: RNCC: 3 | RNVC: 2
DEF(AUST)8813: RNCC: 4 | RNVC: 1

19 Apr 2011

5340-66-123-8509
Double Angle Bracket

661238509
ARLM0118-004: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-66-110-8157
Pipe Hanger

661108157
181: RNCC: 3 | RNVC: 1

7 Feb 1984

5340-66-145-2371
Nonmetallic Bumper

661452371
10273: RNCC: 3 | RNVC: 2
SJ 5023: RNCC: 5 | RNVC: 2

25 Aug 1999

5340-66-051-7530
Bow Handle

5340-66-082-4931
Access Cover

660824931
554339: RNCC: 3 | RNVC: 2

25 Mar 1975

5340-66-158-0513
Manual Control Lever

661580513
434009: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-66-148-8323
Spring Tension Clip

661488323
PNP43F: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-66-155-6936
Mounting Bracket

661556936
00097: RNCC: 3 | RNVC: 2

10 May 2007

5340-66-146-6989
Control

661466989
1411400: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-66-159-5469
Filler Opening Cap

661595469
9232 2308 41: RNCC: 3 | RNVC: 2
9232 2308 41: RNCC: 5 | RNVC: 2

12 Sep 2011

5340-66-145-1618
Mounting Plate

661451618
WI/11966: RNCC: 3 | RNVC: 2

17 Aug 1999

5340-66-112-9026
Handle Grip

661129026
11: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-66-155-5065
Rod End Clevis

661555065
21881: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-161-0041
Clamping Catch

661610041
HA3030: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-66-158-5187
Mounting Bracket

661585187
DE670020000: RNCC: 3 | RNVC: 2

4 Mar 2010

5340-66-158-7747
Mounting Plate

661587747
BMA-A09-0067-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-142-9149
General Purpose Access Door

661429149
658/2/06524/020: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-66-154-3008
Tilting Bracket

661543008
8G800Y114-12: RNCC: 3 | RNVC: 2
KX213: RNCC: 3 | RNVC: 2
KX213: RNCC: 5 | RNVC: 2

19 Apr 2006

5340-66-141-4995
Snap Hook

661414995
H1: RNCC: 3 | RNVC: 2

24 May 1996

5340-66-155-3614
Mounting Bracket

661553614
471-40217-110: RNCC: 3 | RNVC: 2
508654: RNCC: 5 | RNVC: 2

13 Mar 2007

5340-66-157-4897
Mounting Bracket

661574897
V02-08-01-02-00: RNCC: 3 | RNVC: 2

30 Nov 2008

5340-66-132-2251
Dust Cap Nut

661322251
223592-01: RNCC: 3 | RNVC: 2
A201930: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-66-031-9514
Synchro Clamp

660319514
ADE(W)67-975 ISSUE 1: RNCC: 3 | RNVC: 2

11 Mar 1969

5340-66-038-5270
Helical Compression Spring Seat

660385270
151448-101: RNCC: 3 | RNVC: 2

25 Jan 1971

5340-66-158-1939
Dust And Moisture Seal Protective Cap

661581939
BMD-A60-0021-01: RNCC: 3 | RNVC: 2

18 Sep 2009

5340-66-139-3455
Angle Bracket

661393455
6086A: RNCC: 3 | RNVC: 2

6 Sep 1994

5340-66-147-3987
Rod Retainer Clip

661473987
0707012005: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-66-143-4225
Leg

661434225
492357: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-139-7412
Mounting Bracket

661397412
4NX1022: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-66-146-1525
Plate

661461525
536470 01: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-116-0701
Mounting Bracket

661160701
J201426-2: RNCC: 3 | RNVC: 2

8 Aug 1983

5340-66-143-3673
Locking Plug

661433673
371570-2: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-147-0083
Clevis Assembly

661470083
8292006: RNCC: 3 | RNVC: 2
8292006: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-66-146-5700
Lock Key

661465700
PG 312: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-66-159-5047
General Purpose Resilient Mount

661595047
M53366145: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-66-160-7586
Mounting Bracket

661607586
ZENCRA02: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-66-123-8555
Angle Bracket

661238555
ARLM0122: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-66-153-2494
General Purpose Resilient Mount

661532494
2177619/1: RNCC: 3 | RNVC: 2
2177619/1: RNCC: 5 | RNVC: 2

29 Jun 2005

5340-66-116-2389
Elbow Catch

661162389
SA378-3: RNCC: 3 | RNVC: 2

8 Aug 1983

5340-66-019-5813
Turnbuckle

660195813
MT1-7: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-111-4344
General Purpose Resilient Mount

5340-66-044-7116
Butt Hinge

660447116
R100E: RNCC: 3 | RNVC: 2

27 Sep 1971

5340-66-105-4841
Angle Bracket

661054841
450012203: RNCC: 3 | RNVC: 2

17 Jan 1991

5340-66-125-2725
Webbing Strap

661252725
DE580180868: RNCC: 3 | RNVC: 2

21 Dec 1985

5340-66-157-0011
Double Angle Bracket

661570011
DE253010001-2: RNCC: 3 | RNVC: 2

2 Jul 2008

5340-66-154-6511
Access Cover

661546511
6-052-3111: RNCC: 3 | RNVC: 2

3 Aug 2006

5340-66-148-7913
Towing Eye Lifting

661487913
625/2/05067/000: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-66-156-7045
Tie Down Adapter

661567045
ARLM1073-1: RNCC: 3 | RNVC: 2
ARLM1073-1: RNCC: 5 | RNVC: 2

29 Feb 2008

5340-66-147-8574
Stowage Cabin Panel

661478574
F/2888-550-034D: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-034D: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-125-2718
Webbing Strap

661252718
DE580180847-2: RNCC: 3 | RNVC: 2

6 May 1986

5340-66-160-0006
Webbing Strap

661600006
RANMME 2235-1: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-66-152-6799
Barrel Nut Retainer

661526799
NALM00273-5: RNCC: 3 | RNVC: 2
NALM00273-5: RNCC: 5 | RNVC: 2

16 Feb 2005

5340-66-152-6894
Dust And Moisture Seal Protective Cover

661526894
NALM00047-5: RNCC: 3 | RNVC: 2
NALM00047-5: RNCC: 5 | RNVC: 1

30 May 2005

5340-66-145-4864
Air Charging Panel

661454864
MK 429 MOD 1: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-66-142-6370
Handle Grip

661426370
226640: RNCC: 3 | RNVC: 2

14 Dec 1996

5340-66-146-6986
Retaining Clip

661466986
1409732: RNCC: 3 | RNVC: 2

14 Aug 2000

5340-66-127-0287
Mounting Bracket

661270287
300-497: RNCC: 3 | RNVC: 2

25 Jun 1986

5340-66-156-8617
Mounting Plate

661568617
ARLM0866-1: RNCC: 3 | RNVC: 2

9 May 2008

5340-66-161-2581
Mounting Plate

661612581
C-5085: RNCC: 3 | RNVC: 2

8 Aug 2013

5340-66-143-3613
Cover

661433613
142196-1: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-144-5155
Snap Hook

661445155
10616638: RNCC: 1 | RNVC: 2
NJTSF015: RNCC: 3 | RNVC: 2
4170071: RNCC: 5 | RNVC: 2
NJTSF015: RNCC: 5 | RNVC: 2

20 Nov 1998

5340-66-134-7767
General Purpose Access Door

661347767
DE580160658: RNCC: 3 | RNVC: 2

8 Jun 1990

5340-66-140-4081
Hand Crank

661404081
FE85086A100X9: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-160-9196
Access Cover

661609196
01-0950080: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-154-7421
Webbing Strap

661547421
10006014-050: RNCC: 3 | RNVC: 2
10006014-050: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-66-155-6284
Access Cover

661556284
471-30204-202: RNCC: 3 | RNVC: 2
509118: RNCC: 5 | RNVC: 2

30 Apr 2007

5340-66-154-3162
Dust And Moisture Seal Protective Cap-Plug

661543162
CP1080: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-66-161-2701
Mounting Bracket

661612701
15017880: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-66-160-5818
Lock-Release Lever

661605818
TA.A23.94.011: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-66-160-9031
Mounting Bracket

661609031
15020189: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-66-014-1698
Bail Handle

1 Jan 1968

5340-66-152-8018
Butt Hinge

661528018
BMA-A05-0925-01: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-66-147-9405
Female Camlock To B

661479405
AD080: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-160-2291
Mounting Plate

661602291
BMA-A05-1772-01: RNCC: 3 | RNVC: 2

2 May 2012

5340-66-157-6738
Dust And Moisture Seal Protective Cover

661576738
D-2704: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-66-039-2645
Rod End Clevis

660392645
808070-1: RNCC: 3 | RNVC: 2

19 Feb 1971

5340-66-125-8501
Cushioning Pad

661258501
PD676-67: RNCC: 3 | RNVC: 2
IS-RAN-00020: RNCC: 5 | RNVC: 1

17 May 1990

5340-66-137-2742
Locking Assembly

661372742
840629-1-A10-B32-C5/2343: RNCC: 3 | RNVC: 2

24 Oct 1992

5340-66-158-8672
Mounting Plate

661588672
RE730110-1001: RNCC: 3 | RNVC: 2

13 Sep 2010

5340-66-158-8228
Mounting Bracket

661588228
LSA-PALL 01.01: RNCC: 3 | RNVC: 2
P0000250: RNCC: 5 | RNVC: 2

13 Aug 2010

5340-66-156-4479
Mounting Plate

661564479
15011365-01: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-66-108-4969
Catch Strike

661084969
606-2770-217: RNCC: 3 | RNVC: 2

29 May 1981

5340-66-137-4905
Support Column

661374905
A0-200562: RNCC: 3 | RNVC: 2

4 Feb 1993

5340-66-139-1634
Electronic Equipment Hardware Kit

661391634
418/5/52584/000: RNCC: 3 | RNVC: 2
MX-F127: RNCC: 5 | RNVC: 2

16 Jun 1994

5340-66-155-4722
Furniture Glide

661554722
BME-A05-1448-01: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-145-8487
Dust And Moisture Seal Protective Cover

661458487
863.144.84: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-66-016-0272
Angle Bracket

660160272
0111023: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-149-1860
Bolt Plate Assembly

661491860
FS22877: RNCC: 3 | RNVC: 2
FS22877: RNCC: 5 | RNVC: 2

6 Mar 2003

5340-66-160-6548
Mounting Bracket

661606548
ID25-284: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-132-5793
Key Holder

661325793
CP001673: RNCC: 3 | RNVC: 2

15 May 1990

5340-66-143-6012
Eye Hook

661436012
349055TH: RNCC: 3 | RNVC: 2

30 Sep 1997

5340-66-112-3539
Access Cover

661123539
525.14.09.060: RNCC: 3 | RNVC: 2

13 May 1991

5340-66-155-8641
Mounting Bracket

661558641
DE252480091: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-66-090-0685
Angle Bracket

660900685
30-71013: RNCC: 3 | RNVC: 2

10 Oct 1975

5340-66-152-3581
Mounting Bracket

661523581
15009695: RNCC: 3 | RNVC: 2
BSB-1: RNCC: 5 | RNVC: 2

22 Sep 2004

5340-66-146-3720
Mounting Plate

661463720
73127-3-04: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-66-154-1202
Mounting Plate

661541202
MA15-63: RNCC: 3 | RNVC: 2

27 Feb 2006

5340-66-150-8266
Sash Pole

661508266
1720880: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-66-158-8600
Mounting Plate

661588600
DE253600009: RNCC: 3 | RNVC: 2

8 Sep 2010

5340-66-135-1303
Case Corner

661351303
99002: RNCC: 3 | RNVC: 2

15 Jul 1991

5340-66-017-9310
Surface Bolt

660179310
3560-8IN: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-158-7862
Electronic Equipment Hardware Kit

661587862
F21644: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-66-031-6749
Dust And Moisture Seal Boot

660316749
A19916: RNCC: 3 | RNVC: 2

14 Mar 1969

5340-66-085-5155
Rim Lock

660855155
201FB: RNCC: 3 | RNVC: 2
04069704: RNCC: 5 | RNVC: 2

30 Jan 1977

5340-66-139-0958
Pin Securing Plate

661390958
X40RH216A: RNCC: 3 | RNVC: 2
X40RH216A: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-66-085-7763
Manual Control Lever

660857763
6435: RNCC: 3 | RNVC: 2

27 Feb 1975

5340-66-151-8362
Cushioning Pad

661518362
AC187-S: RNCC: 3 | RNVC: 2

24 Dec 2003

5340-66-147-3538
Palm Servi Coupling

661473538
FD1605: RNCC: 3 | RNVC: 2

30 Mar 2001

5340-66-114-0816
Mounting Plate

661140816
RANTME3156: RNCC: 3 | RNVC: 2

3 May 1982

5340-66-028-8860
Ring

660288860
HCF2943: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-139-6663
Mounting Plate

661396663
56W4-S104 PC38: RNCC: 3 | RNVC: 1
56W4-S104 PC38: RNCC: 3 | RNVC: 2

7 Jul 1994

5340-66-155-0870
Yoke

661550870
471-50835-100: RNCC: 3 | RNVC: 2
510264: RNCC: 5 | RNVC: 2

29 Nov 2006

5340-66-157-4650
Mounting Plate

661574650
DE611870014: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-146-1521
Protecting Cap

661461521
535840 01: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-128-6231
Butt Hinge

661286231
MYH3502: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-66-156-5697
Mounting Bracket

661565697
ARLM1076: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-66-120-4402
General Purpose Resilient Mount

5340-66-160-5808
Mounting Bracket

661605808
NALM00820-1: RNCC: 3 | RNVC: 2

11 Sep 2012

5340-66-047-2761
Access Cover

660472761
300C: RNCC: 3 | RNVC: 2
MEA 1540: RNCC: 3 | RNVC: 2

19 Jul 1972

5340-66-154-8074
Mounting Plate

661548074
15007657: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-66-144-2811
General Purpose Resilient Mount

661442811
463977803: RNCC: 3 | RNVC: 2
SFP008AP0123: RNCC: 3 | RNVC: 2

14 Sep 1998

5340-66-141-0816
Dust And Moisture Seal Boot

661410816
EN5: RNCC: 3 | RNVC: 2

31 Aug 1995

5340-66-118-6933
Dust And Moisture Seal Boot

661186933
44M010: RNCC: 3 | RNVC: 2
F82351205A1327: RNCC: 5 | RNVC: 2

5 Apr 1984

5340-66-141-6203
Seal Assembly

661416203
DE250530389: RNCC: 3 | RNVC: 2
DE250530389: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-66-158-7825
Manual Control Lever

661587825
428P-R07A: RNCC: 3 | RNVC: 2
428P-R07A: RNCC: 5 | RNVC: 2

30 Jul 2010

5340-66-154-6951
Enclosure Bracket

661546951
DE252580004: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-128-7854
Rack Hardware Kit

661287854
03025.01: RNCC: 3 | RNVC: 2

15 Sep 1993

5340-66-160-7782
Mounting Bracket

661607782
15017168: RNCC: 3 | RNVC: 2

6 Dec 2012

5340-66-155-8665
Mounting Bracket

661558665
X40RH239C: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-66-085-8677
Plain Solid Disk

660858677
NO PRIMARY REF 66-085-8677: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-118-5321
Access Cover

5340-66-125-3768
Butt Hinge

5340-66-125-3895
Angle Bracket

5340-66-149-5676

5340-66-149-5706

5340-66-160-7073
Cushioning Pad

661607073
BMJ-A05-3199-01: RNCC: 3 | RNVC: 2

1 Nov 2012

5340-66-154-3029
Access Cover

661543029
S0E00E100726-520: RNCC: 3 | RNVC: 2

19 Apr 2006

5340-66-144-6050
Webbing Strap

661446050
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240591A-270: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-66-131-3896
Dust And Moisture Seal Protective Cap-Plug

661313896
JP2000CL: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-66-158-6799
Mounting Bracket

661586799
RAY184020-1: RNCC: 3 | RNVC: 2
RAY184020-1: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-122-9839
Helical Compression Spring Seat

661229839
GU7922: RNCC: 3 | RNVC: 2
FA79GU7922: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

3 Jul 1985

5340-66-153-3836
Adaptor Assembly Ma

661533836
P10051: RNCC: 3 | RNVC: 2

5 Aug 2005

5340-66-146-3552
Access Canvas Panel

661463552
240455A: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-147-2662
Manifold

661472662
DLB9SSX(MOD.SX): RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-150-0230
Swivel Caster

661500230
NO PRIMARY REF 66-150-0230: RNCC: 3 | RNVC: 2
04819501: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-155-4744
Monitor

661554744
7835-10-5000: RNCC: 3 | RNVC: 2
7835-10-5000: RNCC: 5 | RNVC: 2

29 Mar 2007

5340-66-154-7622
Access Cover

661547622
471-90552-521: RNCC: 3 | RNVC: 2
524237: RNCC: 5 | RNVC: 2

30 Aug 2006

5340-66-142-2101
Access Door Hinge

661422101
471-41214-903: RNCC: 3 | RNVC: 2
511368: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-66-154-2688
Access Cover

661542688
S0007A1E1826-521: RNCC: 3 | RNVC: 2

10 Apr 2006

5340-66-154-7821
Angle Bracket

661547821
15006292: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-66-088-1821
Butt Hinge

660881821
1213-251236: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-151-9567
Manual Control Lever

661519567
1614435: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-66-108-4292
Catch

661084292
DE230010429: RNCC: 3 | RNVC: 2

6 Mar 1981

5340-66-154-7652
Mounting Bracket

661547652
15003977: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-66-048-1176
Tee Hinge

660481176
1075R: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-66-160-3896
Thumb Latch

661603896
RP1871: RNCC: 3 | RNVC: 2

6 Jul 2012

5340-66-043-7057
Rim Latch Set

660437057
K57R: RNCC: 3 | RNVC: 2

27 Aug 1971

5340-66-126-2724
Access Cover

661262724
6G5-11191-00-9M: RNCC: 3 | RNVC: 2
6G5-11191-00-9M: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-152-6135
Mounting Bracket

661526135
1402478: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-66-152-7926
Mounting Bracket

661527926
BCMA 0601: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-125-2610
General Purpose Resilient Mount

661252610
DE580170493: RNCC: 3 | RNVC: 2

18 Dec 1985

5340-66-158-1276
Mounting Bracket

661581276
15014084: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-66-147-6899
Retaining Band

661476899
ST1553: RNCC: 3 | RNVC: 2
10617769: RNCC: 5 | RNVC: 2

29 Nov 2001

5340-66-160-3242
Mounting Bracket

661603242
BP5685802: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-66-135-2550
Hand Crank

661352550
10 LISG: RNCC: 3 | RNVC: 2

26 Feb 1992

5340-66-160-7991
General Purpose Guard Rail Section

661607991
ZMEHR: RNCC: 3 | RNVC: 2
ZMEHR: RNCC: 5 | RNVC: 2

17 Dec 2012

5340-66-122-6850
Expansion Plug

661226850
79AX65Z: RNCC: 3 | RNVC: 2
79AX65: RNCC: 3 | RNVC: 2

17 Oct 1984

5340-66-154-6956
Angle Bracket

661546956
DE252580011: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-158-9249
Access Cover

661589249
5210400: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-66-141-3400
Latch Assy

661413400
7FD8010A14G01: RNCC: 3 | RNVC: 2

16 Aug 1995

5340-66-155-1447
Webbing Strap

661551447
17442604: RNCC: 3 | RNVC: 2
17442604: RNCC: 5 | RNVC: 2

14 Dec 2006

5340-66-133-2909
Mounting Plate

661332909
DA96102008: RNCC: 3 | RNVC: 2

5 Jul 1996

5340-66-148-7753
Access Cover

661487753
BE6035: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-66-156-3840
General Purpose Resilient Mount

661563840
15011365: RNCC: 3 | RNVC: 2

15 Nov 2007

5340-66-152-7189
General Purpose Resilient Mount

661527189
1148230: RNCC: 3 | RNVC: 2

21 Apr 2005

5340-66-145-2769
Upper Housing

661452769
00-289015: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-66-146-1005
Paddle Mixer

661461005
NC23: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-122-5078
Joining Pin

661225078
000-16644: RNCC: 3 | RNVC: 2

14 Nov 1984

5340-66-159-0939
Retaining Clip

661590939
DB100374: RNCC: 3 | RNVC: 2
DB100374: RNCC: 3 | RNVC: 2

7 Feb 2011

5340-66-143-4310
Mounting Plate

661434310
492611: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-66-140-6079
Angle. Frame

661406079
004-421: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-146-9581
Dry-Disconn Adaptor

661469581
1672A-20: RNCC: 3 | RNVC: 2

23 Oct 2000

5340-66-115-6240
Cup-Drain

661156240
7YW0100A04G01: RNCC: 3 | RNVC: 2

16 Aug 1995

5340-66-152-7923
Mounting Bracket

661527923
BHMA 0601: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-146-1944
Mounting Bracket

661461944
472 5537-50: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-66-145-4193
Bail Handle

661454193
HHA100BK: RNCC: 3 | RNVC: 2

11 Aug 1999

5340-66-161-1648
Access Cover

661611648
15008588: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-66-139-2940
Spacing Threaded Standoff

661392940
640/2/30553: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-142-8215
Mounting Bracket

661428215
658/2/06456/000: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-66-037-1987
Retaining Strap

660371987
TSE(V)93-795: RNCC: 3 | RNVC: 2

4 Nov 1970

5340-66-109-8180
Rubber Support Die

661098180
MRG41-601: RNCC: 3 | RNVC: 2
5340NA002-0200: RNCC: 5 | RNVC: 9

23 Oct 1981

5340-66-051-7988
Reflector M Bracket

660517988
ADE(V)52-16: RNCC: 3 | RNVC: 1

3 Jul 1972

5340-66-157-7023
Mounting Bracket

661577023
TYPW54020A: RNCC: 3 | RNVC: 2

18 Feb 2009

5340-66-099-1325
Mortise Lock Set

660991325
3G100: RNCC: 3 | RNVC: 2

22 Aug 1978

5340-66-152-6798
Long Barre Retainer

661526798
NALM00273-3: RNCC: 3 | RNVC: 2
NALM00273-3: RNCC: 5 | RNVC: 2

16 Feb 2005

5340-66-060-8156
Dust And Moisture Seal Protective Cap-Plug

660608156
0CP: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-66-131-4858
Fuel Tank Bracket

661314858
3240167R3: RNCC: 3 | RNVC: 2

5 Nov 1988

5340-66-161-1729
Double Angle Bracket

661611729
15020268: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-131-5773
Handle

661315773
78206: RNCC: 3 | RNVC: 2
78206: RNCC: 3 | RNVC: 2
3251492R1: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-66-161-1838
Mounting Bracket

661611838
15019805: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-66-140-7516
Cushioning Pad

661407516
M164: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-66-010-6643
Expansion Plug

660106643
250840: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-038-4478
Helical Compression Spring Retainer

660384478
101220-11180: RNCC: 3 | RNVC: 2

28 Apr 1971

5340-66-140-4159
Handwheel

661404159
FE85088A125X11: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-082-8906
Handwheel

660828906
S3490: RNCC: 3 | RNVC: 2
005-741157: RNCC: 3 | RNVC: 2
001-999007Q7-6: RNCC: 5 | RNVC: 2

1 Dec 1974

5340-66-144-6572
Butt Hinge

661446572
FYD1930/3: RNCC: 3 | RNVC: 2
43-1930-3: RNCC: 3 | RNVC: 2

24 Feb 1999

5340-66-152-7921
Mounting Bracket

661527921
BMMA 0604: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-140-4161
Hand Crank

661404161
FE85087A175X14: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-050-8362
Hi Fitting Assembly

660508362
C4WM1136-3: RNCC: 3 | RNVC: 2

20 May 1972

5340-66-123-2643
Handle Grip

661232643
DE380050000 ITEM 7: RNCC: 3 | RNVC: 2

7 Nov 1985

5340-66-149-0750
Strap Tensioner

661490750
0841: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-66-156-4928
Spacing Threaded Standoff

661564928
10006752-05: RNCC: 3 | RNVC: 2
NP8.0/16.0/B/M4: RNCC: 5 | RNVC: 2

11 Dec 2007

5340-66-150-4696
Magnetic Catch

661504696
NO PRIMARY REF 66-150-4696: RNCC: 3 | RNVC: 2
03326756: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-2554
Dryer Top Panel

661472554
DAC274A6(ASCLUG.600): RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-154-1720
Access Cover

661541720
DE252300004: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-66-157-7667
Loop Clamp

661577667
DE252130236: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-66-153-9856
Self-Locking Insert

661539856
LW118: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-66-147-1863
Water Tank

661471863
2694: RNCC: 3 | RNVC: 2

30 Oct 2000

5340-66-161-3484
Mounting Plate

661613484
AVI-100-014-006/AVI-1780: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-66-153-9659
Access Cover

661539659
M0228FH-AD50-01.00 ITEM 4: RNCC: 3 | RNVC: 2

5 Jan 2006

5340-66-013-8583
Butt Hinge

660138583
303: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-088-1842
Recess Handle

660881842
1213-251295: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-160-7986
Mounting Bracket

661607986
ZMB20: RNCC: 3 | RNVC: 2
ZMB20: RNCC: 5 | RNVC: 2

17 Dec 2012

5340-66-089-7336
Support Bracket

660897336
3534-29D: RNCC: 3 | RNVC: 2

16 Aug 1975

5340-66-027-3375
Retaining Strap

5340-66-032-5524
Rod End Clevis

5340-66-160-2587
Angle Bracket

661602587
ARLM0789-1: RNCC: 3 | RNVC: 2

14 May 2012

5340-66-033-5651
Angle Bracket

660335651
T401456A3: RNCC: 3 | RNVC: 2

14 Oct 1969

5340-66-153-2730
Mounting Bracket

661532730
A210 0303-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-161-1954
Clamping Catch

661611954
BP5685601: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-66-161-2968
Mounting Bracket

661612968
15019292: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-66-145-7623
Spring Holder

661457623
489 5103-03: RNCC: 3 | RNVC: 2

21 Oct 1999

5340-66-143-1459
Dust And Moisture Seal Protective Cover

661431459
138100 16440 K 0001/12: RNCC: 3 | RNVC: 2
9051542047: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-158-6812
Double Angle Bracket

661586812
RAY184031-2: RNCC: 3 | RNVC: 2
RAY184031-2: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-031-4082
Turnbuckle

660314082
ADE(M)232-8: RNCC: 3 | RNVC: 2
ADE(M)232-8: RNCC: 3 | RNVC: 2

22 Jan 1969

5340-66-146-9142
Loop Clamp

661469142
331661S: RNCC: 3 | RNVC: 2
331661S: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-66-146-3470
Front Panel Assembl

661463470
2386-96320-00: RNCC: 3 | RNVC: 2
2386-96320-00: RNCC: 5 | RNVC: 2

10 Apr 2000

5340-66-156-7633
Access Cover

661567633
SWH2030: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-66-027-2277
Retaining Strap

660272277
261-1 1-2IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-143-3877
Cap

661433877
WP-E-2-3: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-158-7601
Mounting Bracket

661587601
BMA-A08-0285: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-156-5110
Angle Bracket

661565110
471-62810-144: RNCC: 3 | RNVC: 2
501423: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-66-150-4136
Screw Thread Insert And Tool Assortment

661504136
NO PRIMARY REF 66-150-4136: RNCC: 3 | RNVC: 2
05557202: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-156-5220
Cover Strip

661565220
471-62810-126: RNCC: 3 | RNVC: 2
501405: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-66-158-0515
Stand Base

661580515
434116B: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-66-055-5929
Mounting Bracket

660555929
154: RNCC: 3 | RNVC: 2

2 Nov 1972

5340-66-130-8107
Mounting Bracket

661308107
016AMR237: RNCC: 3 | RNVC: 2

15 Jun 1988

5340-66-157-2329
Mounting Bracket

661572329
73RU49417M: RNCC: 3 | RNVC: 2
73RU49417M: RNCC: 5 | RNVC: 2

11 Sep 2008

5340-66-150-7412
General Purpose Resilient Mount

661507412
SVT CC105-S-P: RNCC: 3 | RNVC: 2

2 Jun 2003

5340-66-155-5631
Mounting Bracket

661555631
X50KB427B: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-66-155-3088
Pulley Cover

661553088
508293: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-66-160-9038
Strap Fastener Loop

661609038
10000129-3: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-66-137-1332
Door Handle

661371332
A200230 SHEET 2 OF 2 ITEM 8: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-66-135-4065
Caster Wheel

661354065
OUA125: RNCC: 3 | RNVC: 2

10 Sep 1991

5340-66-122-6646
Rub Bonnet Bumper

661226646
12AX114: RNCC: 3 | RNVC: 2
12AX114: RNCC: 3 | RNVC: 2

11 Oct 1984

5340-66-119-3145
Door Lock

661193145
1/27900: RNCC: 3 | RNVC: 1

27 Oct 1983

5340-66-153-2719
Mounting Bracket

661532719
A210 0162: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-154-7812
Plate

661547812
C0062-5: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-66-156-3805
Mounting Bracket

661563805
15011292: RNCC: 3 | RNVC: 2

14 Nov 2007

5340-66-138-4756
Mounting Bracket

661384756
016AMR269-6: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-66-045-3361
Evaporator Do Hinge

660453361
93353: RNCC: 3 | RNVC: 2

4 Jan 1972

5340-66-072-6481
Bail Handle

660726481
C69572: RNCC: 3 | RNVC: 2

7 Jun 1974

5340-66-158-9139
Rigid Caster

661589139
FB2400-03: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-66-158-4716
Backing Plate

661584716
SODFAB03/9: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-66-156-9016
Mounting Bracket

661569016
NALM00715-1: RNCC: 3 | RNVC: 2
NALM00715-1: RNCC: 5 | RNVC: 2

27 May 2008

5340-66-147-9401
Female Camlock To B

661479401
AB080: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-157-9077
Access Hole Frame

661579077
111.36.07.421: RNCC: 3 | RNVC: 2

13 May 2009

5340-66-154-5263
Mechanic Equipment Hardware Kit

661545263
A210 0350: RNCC: 3 | RNVC: 2

26 Jun 2006

5340-66-155-0116
Mounting Bracket

661550116
AS 1204: RNCC: 3 | RNVC: 1
BYG5543: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-66-038-2596
Metal Grille

660382596
FRP: RNCC: 3 | RNVC: 2

21 May 1971

5340-66-153-9041
Swivel Caster

661539041
21-3-0891: RNCC: 3 | RNVC: 2
S872D: RNCC: 5 | RNVC: 2

30 Nov 2005

5340-66-104-2943
Webbing Strap

661042943
99315: RNCC: 3 | RNVC: 2

23 Oct 1971

5340-66-063-3377
Dust And Moisture Seal Protective Cap-Plug

660633377
250CP: RNCC: 3 | RNVC: 2

23 May 1970

5340-66-161-2826
Butt Hinge

661612826
15018149: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-148-5107
Eye Hook

661485107
SPANSET OK13-8: RNCC: 3 | RNVC: 2

24 May 2002

5340-66-151-3491
Dust And Moisture Seal Protective Cover

661513491
NALM00187-9: RNCC: 3 | RNVC: 2
NALM00187-9: RNCC: 5 | RNVC: 1

11 Jun 2004

5340-66-146-2802
Dust And Moisture Seal Protective Cap

661462802
66006Y011: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-66-086-4759
Loop Clamp

660864759
20-9650: RNCC: 3 | RNVC: 2

21 Mar 1975

5340-66-141-6824
Mounting Bracket

661416824
D746A1540: RNCC: 3 | RNVC: 2

18 Oct 1996

5340-66-156-9330
Mounting Plate

661569330
827867: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-66-139-9137
Mount Vertical

661399137
752.2001.83: RNCC: 3 | RNVC: 2
716264: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-66-141-9236
General Purpose Resilient Mount

661419236
0002373712: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-66-155-4984
Mounting Bracket

661554984
120270-11601: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-048-0390
Door Latch Pin

660480390
C52969E: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-66-160-8992
Vent Plug

661608992
4113003: RNCC: 3 | RNVC: 2

26 Feb 2013

5340-66-154-6277
Electronic Equipment Hardware Kit

661546277
SCES13912: RNCC: 3 | RNVC: 2

31 Jul 2006

5340-66-137-1066
Angle Bracket Set

661371066
A013977: RNCC: 3 | RNVC: 2

19 Aug 1992

5340-66-138-0127
Synchro Clamp

661380127
70279: RNCC: 3 | RNVC: 2
70279.00: RNCC: 3 | RNVC: 2
71391: RNCC: 5 | RNVC: 9

24 Aug 1993

5340-66-154-8571
Manual Control Lever

661548571
15009370: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-101-0155
Webbing Strap

661010155
HYG0481: RNCC: 3 | RNVC: 2

9 May 1979

5340-66-136-8136
Metal Grille

661368136
L19600-8: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-66-154-6832
Mounting Bracket

661546832
DE252540009-2: RNCC: 3 | RNVC: 2

11 Aug 2006

5340-66-141-2403
Door Handle

661412403
81.8158.8001: RNCC: 3 | RNVC: 2

31 Oct 1995

5340-66-027-4007
Helical Compression Spring Seat

660274007
PT490: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-088-0374

5340-66-147-3771
Mounting Bracket

661473771
0030200002: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-66-139-9992
Pallet Stop Plate

661399992
12760-B-301: RNCC: 3 | RNVC: 1
12760-B-301/2: RNCC: 3 | RNVC: 2

23 Aug 1994

5340-66-146-1615
Sliding Bowl Bottom

661461615
544191 02: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-66-147-7590
Housing

661477590
6671279-1: RNCC: 3 | RNVC: 2
6671279-1: RNCC: C | RNVC: 1

9 Aug 2001

5340-66-153-3868
Mounting Bracket

661533868
1014921067: RNCC: 3 | RNVC: 2
1014921067: RNCC: 5 | RNVC: 2

8 Aug 2005

5340-66-087-3189
Access Cover

660873189
0240635: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-120-6757
Fwd. Hinge Half

661206757
12S1796-11-145: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-150-0653
Padlock

661500653
NO PRIMARY REF 66-150-0653: RNCC: 3 | RNVC: 2
03381188: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-147-0614
Mounting Bracket

661470614
OWG0604: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-130-7282
Access Cover

661307282
016AMR263: RNCC: 3 | RNVC: 2

23 Jun 1988

5340-66-158-9693
Angle Bracket

661589693
0110217800300D: RNCC: 3 | RNVC: 2
1722621: RNCC: 5 | RNVC: 2

11 Nov 2010

5340-66-159-2926
Catch Strike

661592926
A1-DOOR: RNCC: 3 | RNVC: 2

26 May 2011

5340-66-038-2526
Angle Bracket

660382526
B48361C: RNCC: 3 | RNVC: 2

4 Dec 1970

5340-66-031-9791
Nonmetallic Bumper

660319791
101-758: RNCC: 3 | RNVC: 2

22 Apr 1969

5340-66-147-8693
Support Bracket

661478693
F/2888-575-007A: RNCC: 3 | RNVC: 2
Q EDE F/2888-575-007A: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-028-1904
Helical Compression Spring Retainer

660281904
GEE212: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-0891
Locking Unit

661460891
438 4152-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-157-7326
Mounting Bracket

661577326
503 67 86-01: RNCC: 3 | RNVC: 2
503 67 86-01: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-152-5628
Helical Compression Spring Seat

661525628
360211A: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-66-154-3490
Threaded Rod End

661543490
502AMR329-4: RNCC: 3 | RNVC: 2
502AMR329-4: RNCC: 5 | RNVC: 1

2 May 2006

5340-66-157-7063
Quick Release Plunger

661577063
416012734: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-66-160-9029
Cushioning Pad

661609029
15020156: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-66-113-6658
Protective Tooling

661136658
TOOLING FOR 5340-66-101-5725: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-089-5479
Rope Cleat

660895479
ADE(V)5-111: RNCC: 3 | RNVC: 2

10 Oct 1975

5340-66-110-4704
Pivot Link

661104704
750-05.1000-11: RNCC: 3 | RNVC: 2

19 Jan 1998

5340-66-159-5477
Engine Plate

661595477
9232 2219 90: RNCC: 3 | RNVC: 2
9232 2219 90: RNCC: 5 | RNVC: 2

13 Sep 2011

5340-66-146-1531
Dosing Ring

661461531
537123 02: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-158-5677
Bow Handle

661585677
P10009-9: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-034-4103
Access Cover

660344103
30-31218: RNCC: 3 | RNVC: 2

21 Nov 1969

5340-66-136-2618
Clamping Catch

661362618
060.159.99: RNCC: 3 | RNVC: 2

16 May 1992

5340-66-032-3681
General Purpose Resilient Mount

660323681
M141: RNCC: 3 | RNVC: 2

17 May 1969

5340-66-122-6861
Loop Clamp

661226861
8ME2460: RNCC: 3 | RNVC: 2
8ME2460: RNCC: 3 | RNVC: 2

16 Oct 1984

5340-66-127-8413
Striker Pad

661278413
EX2003479: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-66-155-5674
Mounting Plate

661555674
367367: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-66-130-7704
Rim Latch

661307704
R5711: RNCC: 3 | RNVC: 2

3 Jun 1988

5340-66-128-6315
Webbing Strap

661286315
HYG4122: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-66-143-4433
Facade Door

661434433
492372: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-131-7432
Rod End Clevis

661317432
576.10.09.079: RNCC: 3 | RNVC: 2

4 Sep 1991

5340-66-150-8222
Lock Bolt

661508222
BDI 8217: RNCC: 3 | RNVC: 2
BDI 8217: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-66-156-4931
Spacing Threaded Standoff

661564931
10006752-12: RNCC: 3 | RNVC: 2
NP8.0/20.0/C/M3: RNCC: 5 | RNVC: 2

11 Dec 2007

5340-66-096-4449
Dust And Moisture Seal Boot

660964449
C500-9: RNCC: 3 | RNVC: 2
MLC-0087: RNCC: 3 | RNVC: 2

8 Feb 1978

5340-66-160-9290
General Purpose Resilient Mount

661609290
C75/48A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-66-143-2076
Access Cover

661432076
A00007-0058-C-0003: RNCC: 3 | RNVC: 2

24 Feb 1998

5340-66-063-1863
General Purpose Resilient Mount

660631863
MOUNTRESILIENT6X6: RNCC: 3 | RNVC: 1

10 Nov 1973

5340-66-069-4302
Retaining Clip

660694302
111100-66180: RNCC: 3 | RNVC: 2

21 Jun 1974

5340-66-139-6342
Mounting Plate

661396342
56W4-S105 PC20: RNCC: 3 | RNVC: 1
56W4-S105 PC20: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-66-161-0035
Access Cover

661610035
IASTD01 / ITEM 10: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-66-157-4483
Mounting Bracket

661574483
V01-03-02-00-00: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-151-7832
Access Cover

661517832
AZ107M2: RNCC: 3 | RNVC: 2

20 Mar 2004

5340-66-160-4740
Angle Bracket

661604740
119.40.07.082: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-66-063-3385
Butt Hinge Leaf

660633385
15-9079: RNCC: 3 | RNVC: 2
03905: RNCC: 5 | RNVC: 9

23 May 1970

5340-66-160-3876
Mounting Bracket

661603876
ID32-113: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-154-1987
Access Cover

661541987
S0E20A1E1823/521: RNCC: 3 | RNVC: 2

22 Mar 2006

5340-66-161-1767
Mounting Plate

661611767
15017670: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-66-126-3733
Handwheel

661263733
55-70: RNCC: 3 | RNVC: 2

22 Feb 1991

5340-66-110-8503
Pipe Hanger

661108503
183: RNCC: 3 | RNVC: 1

27 Oct 1983

5340-66-136-1558
Angle Bracket

661361558
A013763 SHT3 ITEM 3: RNCC: 3 | RNVC: 1
A013763 SHT 5: RNCC: 3 | RNVC: 2

12 May 1992

5340-66-155-9996
Access Cover

661559996
1214372: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-017-9809
Expansion Shield

660179809
FE4: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-153-6660
Webbing Strap

661536660
9125D05040001: RNCC: 3 | RNVC: 2

10 Oct 2005

5340-66-161-1807
Mounting Plate

661611807
15019715: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-66-149-1695
Webbing Strap

661491695
410D: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-66-155-4732
Retaining Clip

661554732
07283-36155: RNCC: 3 | RNVC: 2
07283-36155: RNCC: 5 | RNVC: 2

29 Mar 2007

5340-66-070-5492
Hinge

660705492
71456: RNCC: 3 | RNVC: 2

25 Jul 1974

5340-66-082-8694
Handwheel

660828694
S3528: RNCC: 3 | RNVC: 2
005-741147: RNCC: 3 | RNVC: 2
001-999007Q6-8: RNCC: 5 | RNVC: 2

1 Nov 1974

5340-66-024-0724
Webbing Strap

660240724
ADE(W)28-34: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-159-4377
Mounting Bracket

661594377
VFS-DV: RNCC: 3 | RNVC: 2
VFS-DV: RNCC: 5 | RNVC: 2

13 Jul 2011

5340-66-101-8239

5340-66-158-6191
Dust And Moisture Seal Boot

661586191
471-DM001-5: RNCC: 3 | RNVC: 2
1713425: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-66-128-8827
Rod End Clevis

661288827
6417: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-66-144-6332
Hinged Hasp

661446332
HYM946: RNCC: 3 | RNVC: 2
0406 1003: RNCC: 5 | RNVC: 2
CAT NO 375: RNCC: 5 | RNVC: 2

9 Feb 1999

5340-66-151-6307
Manual Control Handle

661516307
NO PRIMARY REF 66-151-6307: RNCC: 3 | RNVC: 2
TM6472: RNCC: 5 | RNVC: 2

29 Aug 2003

5340-66-157-4079
Corrosion Preventive Anode

661574079
CDZ9-32: RNCC: 3 | RNVC: 2
HSA002647: RNCC: 5 | RNVC: 2
CDZ9-32: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-66-160-8346
Access Cover

661608346
BMA-A03-0025B01: RNCC: 3 | RNVC: 2

23 Jan 2013

5340-66-147-4181
Angle Bracket

661474181
0774D40: RNCC: 3 | RNVC: 2
22-0774A-25: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-101-9405
Snap Hook

661019405
RF 2355: RNCC: 3 | RNVC: 2
FG770: RNCC: 5 | RNVC: 9

16 Aug 2000

5340-66-145-2759
Bottom Cone Cl Ring

661452759
00-203191: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-66-154-7787
Mounting Plate

661547787
15004421: RNCC: 3 | RNVC: 2

4 Sep 2006

5340-66-156-3517
Angle Bracket

661563517
15015174: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-66-140-5844
General Purpose Access Door

661405844
004-390: RNCC: 3 | RNVC: 2

9 Nov 1995

5340-66-152-7383
Permanent Magnet

661527383
89020: RNCC: 3 | RNVC: 2

18 May 2005

5340-66-077-9379
Settle-Bed Hook

660779379
812: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-158-5120
Snap Hook

661585120
M1030004: RNCC: 3 | RNVC: 2

2 Mar 2010

5340-66-088-1553
General Purpose Resilient Mount

660881553
M503-25336-40: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-145-9640
Walkway Bracket

661459640
MH-A613-0001-B1: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-66-160-6699
Leakproof Seal Plug

661606699
94-052-7132 ITEMS 1 TO 8: RNCC: 3 | RNVC: 2
HSA005304: RNCC: 5 | RNVC: 2

10 Oct 2012

5340-66-150-2037
Support Hook

661502037
NO PRIMARY REF 66-150-2037: RNCC: 3 | RNVC: 2
04312764: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-2232
Flush Catch Claw

661552232
08-0230008: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-66-143-0988
Mortise Lock

661430988
530-000: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-065-0683
Door Hasp

660650683
4909/5: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-66-157-1154
Corrosion Preventive Anode

661571154
3039257: RNCC: 3 | RNVC: 2
71-Z: RNCC: 5 | RNVC: 2

31 Jul 2008

5340-66-146-1517
Bearing Shield

661461517
526754 02: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-133-6795
Mounting Bracket

661336795
DE580160692: RNCC: 3 | RNVC: 2

6 Mar 1990

5340-66-074-8550
Dust And Moisture Seal Protective Cap

660748550
RANTE21764: RNCC: 3 | RNVC: 2

25 Jun 1974

5340-66-151-8070
Butt Hinge

661518070
DE251600019: RNCC: 3 | RNVC: 2
DE251600019: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-153-0631
Mounting Plate

661530631
LTE-A07-0002: RNCC: 3 | RNVC: 2
LTE-A07-0002-01: RNCC: 3 | RNVC: 2

30 May 2005

5340-66-154-0685
Strapping Seal

661540685
P4-60-0-506: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-66-156-4404
Webbing Strap

661564404
10006013-030: RNCC: 3 | RNVC: 2
10006013-030: RNCC: 3 | RNVC: 2
10006013-030: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-66-144-1520
Padlock Key

661441520
ASN-8401-01: RNCC: 3 | RNVC: 1

11 Jun 1998

5340-66-122-6964
Retaining Strap

5340-66-122-6960
Doorstop

5340-66-121-6949
Access Cover

661216949
525.14.09.129: RNCC: 3 | RNVC: 2

13 May 1991

5340-66-128-6025
Spring Tension Clip

661286025
HYL8668: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-66-152-3772
Rifle Butt Bracket

661523772
DE251920017: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-087-9427
Butt Hinge

660879427
8838: RNCC: 3 | RNVC: 1

15 May 1971

5340-66-155-3770
Double Angle Bracket

661553770
525.72.09.641: RNCC: 3 | RNVC: 2

15 Mar 2007

5340-66-139-6285
Access Cover

661396285
56W4-S118 PC 170: RNCC: 3 | RNVC: 1
56W4-S118 PC 170: RNCC: 3 | RNVC: 2

8 Jul 1994

5340-66-146-0931
Connection

661460931
471 4521-01: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-66-160-1040
Dust And Moisture Seal Boot

661601040
5549-447: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-66-122-9822
General Purpose Resilient Mount

661229822
3210532R92: RNCC: 3 | RNVC: 2

30 Jun 1985

5340-66-151-8871
Nonmetallic Bumper

661518871
RING: RNCC: 3 | RNVC: 2

19 Feb 2004

5340-66-145-7022
Rod End Clevis

661457022
DE250570002: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-66-155-1682
Vent Plug

661551682
694410: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-159-5830
Retaining Strap

661595830
MCR102070000: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-66-026-2719
Nonmetallic Bumper

660262719
886054R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-150-8807
Track Support Slide

661508807
12756604-01: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-66-146-3161
Panel Sub-Assembly

661463161
2318-96650-00: RNCC: 3 | RNVC: 2
2318-96650-00: RNCC: 5 | RNVC: 2

4 Apr 2000

5340-66-159-8169
Angle Bracket

661598169
BMA-A10-0132-01: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-154-7613
Access Cover

661547613
471-90552-506: RNCC: 3 | RNVC: 2
524228: RNCC: 5 | RNVC: 2

30 Aug 2006

5340-66-150-3939
Butt Hinge

661503939
NO PRIMARY REF 66-150-3939: RNCC: 3 | RNVC: 2
04729015: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-3322
Webbing Strap

661543322
1264199: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-66-139-5640
Clamping Catch

661395640
TL800: RNCC: 3 | RNVC: 1
56W4-S115PC86: RNCC: 3 | RNVC: 1
56W4-S115PC86: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-66-023-4033
Bow Handle

660234033
514: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-7994
Dust And Moisture Seal Protective Cap-Plug

661577994
800: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-66-147-0656
Butt Hinge

661470656
T7016FPSS: RNCC: 3 | RNVC: 2
HYM1273: RNCC: 5 | RNVC: 2

7 Dec 2000

5340-66-161-2832
Mounting Bracket

661612832
15018177: RNCC: 3 | RNVC: 2

21 Aug 2013

Load More Results