What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 11 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 11 of 29

5340-66-077-9362
Cupboard Button

660779362
261: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-109-1459
Buckle

661091459
SR 50: RNCC: 3 | RNVC: 1

16 Apr 1986

5340-66-131-7358
Access Cover

661317358
553.30.09.211: RNCC: 3 | RNVC: 2

18 Nov 1988

5340-66-150-8798
Mounting Bracket

661508798
DE251240003: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-66-157-6405
Mounting Plate

661576405
DE253280040: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-66-061-0034
General Purpose Resilient Mount

660610034
B134: RNCC: 3 | RNVC: 2
B134: RNCC: 3 | RNVC: 2

27 Jan 1975

5340-66-156-7796
Catch Strike

661567796
33148: RNCC: 3 | RNVC: 2
33148: RNCC: 5 | RNVC: 2

4 Apr 2008

5340-66-145-2154
Mounting Bracket

661452154
NE0128-E: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-66-154-8516
Blank Panel

661548516
15010478-05: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-127-1922
Con Strap Assembly

661271922
G2-27003: RNCC: 3 | RNVC: 2

20 Aug 1999

5340-66-155-8426
Guide Clamp

661558426
471-50807-144: RNCC: 3 | RNVC: 2
506050: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-154-7382
Webbing Strap

661547382
10006012-040: RNCC: 3 | RNVC: 2
10006012-040: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-143-8236
Block Clamp

661438236
23511439: RNCC: 3 | RNVC: 2

11 Aug 1997

5340-66-161-1644
Butt Hinge

661611644
15008091: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-66-156-8064
Access Cover

661568064
203-54-73311: RNCC: 3 | RNVC: 2
203-54-73311: RNCC: 5 | RNVC: 2

21 Apr 2008

5340-66-156-4651
Butt Hinge

661564651
15016492: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-66-161-2946
Mounting Bracket

661612946
15018994: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-66-098-9247
Rigid Caster

660989247
R576: RNCC: 3 | RNVC: 2

10 Jun 1978

5340-66-140-6739
Electronic Equipment Hardware Kit

661406739
MX-F320: RNCC: 3 | RNVC: 2
DE530020029: RNCC: 3 | RNVC: 2
DE530020029: RNCC: 3 | RNVC: 2

27 Feb 1996

5340-66-149-5675
Nalclip Dispenser

661495675
NO PRIMARY REF 66-149-5675: RNCC: 3 | RNVC: 2
45701: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-142-4638
Mounting Bracket

661424638
471-90423-125: RNCC: 3 | RNVC: 2
520660: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-152-4309
Jaw Transit Securin

661524309
456042A: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-66-128-1011
Mounting Bracket

661281011
EO-065-412: RNCC: 3 | RNVC: 2

8 Mar 1996

5340-66-081-2426
Hand Crank

660812426
23574: RNCC: 3 | RNVC: 2

13 Mar 1976

5340-66-024-2367
Angle Bracket

660242367
ADE(A)46-4: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-122-8267
Nut A Locking Plate

5340-66-141-0356
Mounting Bracket

661410356
016AMR371-3: RNCC: 3 | RNVC: 2

18 Aug 1995

5340-66-143-3664
Bracket

661433664
142501: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-054-1130
Fuel Tank Strap

660541130
191659R11: RNCC: 3 | RNVC: 2

15 Mar 1973

5340-66-147-8623
Angle Bracket

661478623
F/2888-570-013B: RNCC: 3 | RNVC: 2
Q EDE F/2888-570-013B: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-66-134-4277
Manual Control Handle

661344277
704-48222-00: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-66-156-0986
Block Clamp

661560986
90921: RNCC: 3 | RNVC: 2
90921-TPL77-B12: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-66-156-6319
Mounting Bracket

661566319
3550531: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-66-156-3920
Mounting Bracket

661563920
15013269: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-66-029-5366
Retaining Strap

660295366
1161: RNCC: 3 | RNVC: 2

16 Oct 1968

5340-66-016-2605
Retaining Strap

660162605
1901DET1: RNCC: 2 | RNVC: 2

1 Jan 1968

5340-66-146-6999
Basket Handle

661466999
1421961: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-66-158-6760
Mounting Plate

661586760
RAY184011-1: RNCC: 3 | RNVC: 2
RAY184011-1: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-157-8179
Permanent Magnet

661578179
20006: RNCC: 3 | RNVC: 2

6 Apr 2009

5340-66-119-4953
An Colletted Sleeve

661194953
664-00004: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-66-151-8621
General Purpose Resilient Mount

661518621
9125D40001026: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-66-155-6736
Suspension Unit

661556736
100430: RNCC: 3 | RNVC: 2
1162925: RNCC: 5 | RNVC: 2

7 May 2007

5340-66-160-3701
Access Cover

661603701
45-50003: RNCC: 3 | RNVC: 2

26 Jun 2012

5340-66-155-7505
Angle Bracket

661557505
X50QL354B: RNCC: 3 | RNVC: 2

21 May 2007

5340-66-019-7389
Strap End Clip

660197389
ADE(M)183-12: RNCC: 3 | RNVC: 2
374: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-150-8736
Mounting Bracket

661508736
69-15858: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-66-150-2041
Support Hook

661502041
NO PRIMARY REF 66-150-2041: RNCC: 3 | RNVC: 2
04964207: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-153-9674
Access Cover

661539674
447042A: RNCC: 3 | RNVC: 2

5 Jan 2006

5340-66-122-4395
Bow Handle

5340-66-149-5697

5340-66-149-5671

5340-66-146-7809
Manifold

661467809
522464: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-66-138-7056
Loop Clamp

661387056
120270-59320: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-66-154-3756
Nonmetallic Bumper

661543756
M747: RNCC: 3 | RNVC: 2

8 May 2006

5340-66-154-4312
Electronic Equipment Hardware Kit

661544312
07774: RNCC: 3 | RNVC: 2

23 May 2006

5340-66-145-9654
Mounting Bracket

661459654
CX25-M105: RNCC: 3 | RNVC: 2

9 Nov 2001

5340-66-147-2361
Alarm Panel

661472361
LCH/A30041: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-158-0838
Synchro Clamp

661580838
79786869: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-66-144-7024
Retaining Clip

661447024
GFK7511: RNCC: 3 | RNVC: 2
GFK7511: RNCC: 3 | RNVC: 2

4 May 1999

5340-66-155-4817
Frame Foot

661554817
11252: RNCC: 3 | RNVC: 2
11252: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-66-121-6309
Pipe Hanger

661216309
532.30.09.178: RNCC: 3 | RNVC: 2

13 May 1991

5340-66-154-0205
Lock Key

661540205
101022: RNCC: 3 | RNVC: 2

25 Jan 2006

5340-66-161-1322
Access Cover

661611322
50568: RNCC: 3 | RNVC: 2

25 Jun 2013

5340-66-154-1117
Mounting Plate

661541117
DE252480029: RNCC: 3 | RNVC: 2

23 Feb 2006

5340-66-157-9152
Access Hole Frame

661579152
557.22.09.171: RNCC: 3 | RNVC: 2

15 May 2009

5340-66-154-6960
Access Cover

661546960
DE252580017: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-154-0309
Manipulat Strap Set

661540309
101126: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-66-128-5638
Angle Bracket

661285638
8942556441: RNCC: 3 | RNVC: 2
8942556441: RNCC: 5 | RNVC: 2

8 Aug 1989

5340-66-142-8833
Webbing Strap

661428833
DE580676343: RNCC: 3 | RNVC: 2

5 Jun 1997

5340-66-156-4576
Perspex Chip Travel

661564576
5H1191: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-025-2531
Nut And Bolt Locking Plate

660252531
GEB888: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-4653
Handwheel

661564653
467901602: RNCC: 3 | RNVC: 2
467901602: RNCC: 5 | RNVC: 2

3 Dec 2007

5340-66-139-5655
Cushioning Pad

661395655
56W4-S115PC82: RNCC: 3 | RNVC: 1
56W4-S115PC82: RNCC: 3 | RNVC: 2

28 Jun 1994

5340-66-139-4549
Angle Bracket

661394549
01-06-10: RNCC: 3 | RNVC: 1

1 Dec 1994

5340-66-143-0978
Door Closer

661430978
ARROW 737/SH/CW SSS: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-152-0207
Mounting Bracket

661520207
BMA-A05-0930-01: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-66-154-8711
General Purpose Resilient Mount

661548711
471-20201-3: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-66-157-4605
Catch Strike

661574605
V000-CE-0003: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-139-1794
Reta Assembly Strap

661391794
SCES10623: RNCC: 3 | RNVC: 1
FL/14: RNCC: 5 | RNVC: 2

5 Jul 1994

5340-66-150-5769
General Purpose Resilient Mount

661505769
NO PRIMARY REF 66-150-5769: RNCC: 3 | RNVC: 2
05135611: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-158-8837
Elastic Strap

661588837
5170484: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-66-154-1166
Mounting Bracket

661541166
15012026: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-66-157-2962
Decor Ring

661572962
10053159: RNCC: 3 | RNVC: 2

1 Oct 2008

5340-66-160-7111
Butt Hinge

661607111
15018499: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-66-157-3497
Dust And Moisture Seal Boot

661573497
413002: RNCC: 3 | RNVC: 2
M3238: RNCC: 5 | RNVC: 2
HSG000678: RNCC: 5 | RNVC: 2

15 Oct 2008

5340-66-016-0430
Detent Plunger

660160430
219093: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-153-2232
Chicago Screw Set

661532232
98550: RNCC: 3 | RNVC: 1
98550: RNCC: 5 | RNVC: 2

22 Jun 2005

5340-66-143-8160
Webbing Strap

661438160
ANZ-MD-02522: RNCC: 3 | RNVC: 2

8 Aug 1997

5340-66-065-0665

5340-66-034-0056
Angle Bracket

5340-66-074-8551
Dust And Moisture Seal Protective Cap

660748551
RANTE21765: RNCC: 3 | RNVC: 2

25 Jun 1974

5340-66-037-3149
Retaining Clip

660373149
EFE275: RNCC: 3 | RNVC: 2

14 Sep 1970

5340-66-020-0262
Retaining Strap

660200262
4405: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-083-0955
Angle Bracket

660830955
335530: RNCC: 3 | RNVC: 2

6 Nov 1974

5340-66-031-9790
Nonmetallic Bumper

660319790
101-757: RNCC: 3 | RNVC: 2

22 Apr 1969

5340-66-158-0805
Angle Bracket

661580805
15019002: RNCC: 3 | RNVC: 2

31 Jul 2009

5340-66-160-3414
Spacing Threaded Standoff

661603414
15018762: RNCC: 3 | RNVC: 2

20 Jun 2012

5340-66-158-8811
Mounting Plate

661588811
TYXF11100A: RNCC: 3 | RNVC: 2

21 Sep 2010

5340-66-128-8111
Loop Clamp

661288111
3039267: RNCC: 3 | RNVC: 2
CU3039267: RNCC: 3 | RNVC: 2

12 Oct 1993

5340-66-034-2512
Dust And Moisture Seal Boot

660342512
2000E7K019B: RNCC: 3 | RNVC: 2

30 Jan 1960

5340-66-147-7372
Mounting Plate

661477372
BT-0415X035-D: RNCC: 3 | RNVC: 2

31 Jul 2001

5340-66-094-0117
Control Lever Shaft

660940117
6908: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-160-6782
Multiple Angle Bracket

661606782
PN106128: RNCC: 3 | RNVC: 2

15 Oct 2012

5340-66-155-9481
Mounting Bracket

661559481
X50QS3123A: RNCC: 3 | RNVC: 2

5 Jul 2007

5340-66-159-8234
Loop Clamp

661598234
BM050016: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-66-143-3388
Guide

661433388
141946: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-159-8176
Loop Clamp

661598176
BM080064: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-105-4894
Mounting Plate

661054894
450015102: RNCC: 3 | RNVC: 2

27 Mar 1991

5340-66-159-7702
Lock Key

661597702
SPARE KEYS: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-66-145-1907
Latch

661451907
360043: RNCC: 3 | RNVC: 2

17 Jul 2000

5340-66-161-2401
Access Cover

661612401
BP5685499: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-66-157-8856
Protective Lanyard

661578856
V20207SS: RNCC: 3 | RNVC: 2

4 May 2009

5340-66-153-4120
Mounting Plate

661534120
15012770: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-024-0142
Spacing Threaded Standoff

660240142
ADE(W)28-64: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-135-2092
Webbing Strap

661352092
SFG-AS-0020: RNCC: 3 | RNVC: 2
347H142A: RNCC: 3 | RNVC: 2

2 Sep 1991

5340-66-156-7817
Loop Clamp

661567817
532.30.09.268: RNCC: 3 | RNVC: 2

7 Apr 2008

5340-66-156-2493
Mounting Bracket

661562493
A2100229: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-66-154-1067
Clamping Catch

661541067
HA1054: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-66-039-6009
Door Handle

660396009
508-69-B: RNCC: 3 | RNVC: 2

1 Jul 1971

5340-66-157-1157
Corrosion Preventive Anode

661571157
3039259: RNCC: 3 | RNVC: 2
96-Z: RNCC: 5 | RNVC: 2

31 Jul 2008

5340-66-144-1519
Padlock

661441519
8401-11: RNCC: 3 | RNVC: 1

11 Jun 1998

5340-66-125-3242
Butt Hinge

661253242
DE580180790: RNCC: 3 | RNVC: 2

17 Apr 1986

5340-66-158-0516
Stand Base

661580516
434116C: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-66-134-1560
Mechanical Stop

661341560
356 4428: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-66-137-6724
Angle Bracket

661376724
044999: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-66-147-7730
Cruciform

661477730
40LB-CF: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-66-161-4064
Loop Holder

661614064
D-2277: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-66-142-9680
Mounting Plate

661429680
658/2/05619/002: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-156-4116
Angle Bracket

661564116
15013832: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-66-120-4913
Hand Crank

661204913
51481-65010: RNCC: 3 | RNVC: 2

5 Jun 1984

5340-66-154-3705
Mounting Bracket

661543705
DE251560012: RNCC: 3 | RNVC: 2

5 May 2006

5340-66-049-6743
Spring Tension Clip

660496743
DSD456: RNCC: 3 | RNVC: 2

20 May 1972

5340-66-072-3748
Loop Clamp

660723748
7-10MMF: RNCC: 3 | RNVC: 2

12 Nov 1970

5340-66-159-0835
Access Cover

661590835
E15552: RNCC: 3 | RNVC: 2
E15552: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-66-150-0646
Padlock

661500646
NO PRIMARY REF 66-150-0646: RNCC: 3 | RNVC: 2
03380899: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-149-5785
Permanent Magnet

661495785
NO PRIMARY REF 66-149-5785: RNCC: 3 | RNVC: 2
QTTMB4500: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-160-2214
Mounting Plate

661602214
BMP-A05-2023-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-147-8649
Kit Mounting

661478649
571101: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-66-054-1633
Spring Tension Clip

5340-66-146-2643
Fl Cover Protection

661462643
1564791: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-66-151-3489
Dust And Moisture Seal Protective Cover

661513489
NALM00187-3: RNCC: 3 | RNVC: 2
NALM00187-3: RNCC: 5 | RNVC: 1

11 Jun 2004

5340-66-161-1546
Rod End Clevis

661611546
380017: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-66-136-4677
Dust And Moisture Seal Protective Cap

661364677
CES17673ITEM20: RNCC: 3 | RNVC: 2
DUSTCAP,FEMALE40MM.PT.NO B: RNCC: 5 | RNVC: 2

22 Mar 1993

5340-66-148-6597
Bracket Assembly

661486597
024AMR021-1: RNCC: 3 | RNVC: 2

17 Jan 2003

5340-66-147-4490
Mounting Bracket

661474490
CX25-1-M31-0: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-158-2810
Access Cover

661582810
BDI 30400-8-4: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-66-128-5350
Catch Strike

661285350
MYH3270: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-66-019-5639
Expansion Plug

660195639
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-153-7719
Multiple Angle Bracket

661537719
860954-7: RNCC: 3 | RNVC: 2
860954-7: RNCC: 5 | RNVC: 2
860954-7: RNCC: 5 | RNVC: 2

26 Oct 2005

5340-66-153-2675
Mounting Bracket

661532675
A210 0295: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-155-7428
Angle Bracket

661557428
X50MF223B: RNCC: 3 | RNVC: 2

17 May 2007

5340-66-153-4200
Mounting Plate

661534200
15013082-02: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-137-1328
Door Handle

661371328
A200230 SHEET 2 OF 2 ITEM 4: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-66-157-5670
Retaining Strap

661575670
10000129-5: RNCC: 3 | RNVC: 2

22 Dec 2008

5340-66-139-8275
Handwheel

661398275
70285: RNCC: 3 | RNVC: 2

24 Aug 1994

5340-66-155-6543
Mounting Bracket

661556543
X50QB337: RNCC: 3 | RNVC: 2

2 May 2007

5340-66-140-2718
Access Cover

661402718
29000/301-4: RNCC: 2 | RNVC: 2
29000/301-4: RNCC: 3 | RNVC: 2

20 Jan 1995

5340-66-139-5325
Helical Compression Spring Seat

661395325
PL1GV5020B100003: RNCC: 3 | RNVC: 2
729723: RNCC: 5 | RNVC: 2

25 May 1994

5340-66-139-1959
Snap Hook

661391959
RF650: RNCC: 3 | RNVC: 2

24 Dec 1993

5340-66-159-5436
General Purpose Resilient Mount

661595436
9232 1411 21: RNCC: 3 | RNVC: 2
9232 1411 21: RNCC: 5 | RNVC: 2

12 Sep 2011

5340-66-154-7708
Webbing Strap

661547708
P10023: RNCC: 3 | RNVC: 2

1 Sep 2006

5340-66-132-1058
Turnbuckle

661321058
RF226: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-66-147-0021
Turnbuckle

661470021
NLR 33 JBE: RNCC: 3 | RNVC: 2

13 Oct 2000

5340-66-041-8853
Corner Brace

660418853
11033: RNCC: 3 | RNVC: 2

23 Jun 1971

5340-66-143-3218
Nonmetallic Bumper

661433218
153333: RNCC: 3 | RNVC: 2

9 Apr 1998

5340-66-147-5238
Elastic Strap

661475238
OP 3507AS: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-66-154-7820
Mounting Bracket

661547820
15004435: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-66-148-9498
Double Angle Bracket

661489498
0110 217 600 200: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-66-146-1512
Height Adjust Ring

661461512
519607 03: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-143-3203
Valve Base

661433203
152972: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-66-151-7833
Access Cover

661517833
AZ107: RNCC: 3 | RNVC: 2

20 Mar 2004

5340-66-128-2043
Butt Hinge

5340-66-157-3872
Retaining Strap

661573872
AG-A0331: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-66-144-9798
Turnbuckle

661449798
RF225: RNCC: 3 | RNVC: 2

11 Jun 1999

5340-66-142-8397
Angle Bracket

661428397
MEA 1789-6: RNCC: 3 | RNVC: 2

17 Jan 1997

5340-66-155-4371
Sheet

661554371
203-46-62130: RNCC: 3 | RNVC: 2
203-46-62130: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-155-9188
Angle Bracket

661559188
X30RU32: RNCC: 3 | RNVC: 2

28 Jun 2007

5340-66-037-4358
Webbing Strap

21 May 1971

5340-66-036-8512
General Purpose Resilient Mount

660368512
7407967: RNCC: 3 | RNVC: 2

4 Sep 1970

5340-66-045-2809
Rod End Clevis

660452809
ATR513: RNCC: 3 | RNVC: 2

17 Dec 1971

5340-66-160-7583
Mounting Bracket

661607583
ZENCRA01: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-66-157-9146
Mounting Plate

661579146
ARLM1197-1: RNCC: 3 | RNVC: 2

15 May 2009

5340-66-143-3626
Lock Handle

661433626
142418-1: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-157-8827
Angle Bracket

661578827
BMP-A05-2050-01: RNCC: 3 | RNVC: 2

1 May 2009

5340-66-146-6981
Breaker Collar

661466981
1408152: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-66-158-6808
Double Angle Bracket

661586808
RAY184011-3: RNCC: 3 | RNVC: 2
RAY184011-3: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-152-6019
Sledge Guide Wire

661526019
471-50832-1: RNCC: 3 | RNVC: 2
1621040: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-66-041-4753
Loop Clamp

660414753
N313-8: RNCC: 3 | RNVC: 2
9463105103: RNCC: 5 | RNVC: 2
946.31.05.103: RNCC: 5 | RNVC: 2

18 Jun 1971

5340-66-138-8288
Manual Control Lever

661388288
X211446012: RNCC: 3 | RNVC: 2

19 Apr 1994

5340-66-156-5413
Electronic Equipment Hardware Kit

661565413
SCES 20030: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-66-159-7118
Angle Bracket

661597118
535.10.09.024: RNCC: 3 | RNVC: 2

15 Dec 2011

5340-66-160-3155
Mounting Plate

661603155
BMA-H19-0048-01: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-66-150-0250
Swivel Caster

661500250
NO PRIMARY REF 66-150-0250: RNCC: 3 | RNVC: 2
04788904: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-157-7572
Bumper

661577572
1132.10: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-66-146-5947
Loop Clamp

661465947
17284-90063: RNCC: 3 | RNVC: 2
17284-90063: RNCC: 5 | RNVC: 2

2 Jun 2000

5340-66-147-9393
Male Camlock To Bsp

661479393
AA080: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-160-2502
Mounting Plate

661602502
DE490260000-2: RNCC: 3 | RNVC: 2

9 May 2012

5340-66-144-8781
Mounting Bracket

661448781
14221/15/027: RNCC: 3 | RNVC: 2

16 Apr 1999

5340-66-028-8713
Spring

660288713
ASF5147: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-024-7474
Access Cover

660247474
7296593: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-125-3481
General Purpose Access Door

661253481
DE580180621: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-66-157-1605
Dust And Moisture Seal Protective Cap

661571605
634B-80-PP: RNCC: 3 | RNVC: 9
P0000217: RNCC: 5 | RNVC: 2
634B-80-PP: RNCC: 5 | RNVC: 2

22 Aug 2008

5340-66-159-5177
Mounting Plate

661595177
ARLM1130-1: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-66-157-9636
Mounting Plate

661579636
MCIS-00032-01: RNCC: 3 | RNVC: 2
MCIS-00032-01: RNCC: 5 | RNVC: 2

3 Jun 2009

5340-66-150-0499
Tee Hinge

661500499
NO PRIMARY REF 66-150-0499: RNCC: 3 | RNVC: 2
04088400: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-049-4446
Angle Bracket

660494446
137: RNCC: 3 | RNVC: 2

14 May 1972

5340-66-149-5786

5340-66-149-5650

5340-66-147-2728
Roller

661472728
DWR120: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-147-2746
Rinse Fitting

661472746
929081: RNCC: 3 | RNVC: 2
DZR217: RNCC: 3 | RNVC: 9

21 Dec 2000

5340-66-156-9070
Mounting Bracket

661569070
510-28/V: RNCC: 3 | RNVC: 2

28 May 2008

5340-66-134-9296
Mounting Plate

661349296
675/1/43210/000: RNCC: 3 | RNVC: 2
MT-F311: RNCC: 5 | RNVC: 1

3 Apr 1991

5340-66-146-1802
Studding

661461802
H70914-CT-2: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-107-5883
Retaining Clip

661075883
E01872: RNCC: 3 | RNVC: 2

11 Aug 1980

5340-66-085-8605
Hinged Hasp

660858605
12-85030: RNCC: 3 | RNVC: 2

8 Jan 1976

5340-66-093-2622
Rod End Clevis

5340-66-153-4072
Mounting Plate

661534072
15012782: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-155-3366
Mounting Plate

661553366
DE252690001: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-66-149-6056

5340-66-160-9641
Multiple Angle Bracket

661609641
MJ021-1: RNCC: 3 | RNVC: 2

25 Mar 2013

5340-66-062-9082
Nonmetallic Bumper

660629082
RUBBER BUMPER: RNCC: 3 | RNVC: 1

25 Jun 1974

5340-66-127-8414
Actuator Plug

661278414
EX20048537: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-66-139-8688
Angle Bracket

661398688
88.8281.5203: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-66-154-7870
General Purpose Access Door

661547870
15005536: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-66-104-2014
Spring Clip

661042014
DE420030014: RNCC: 3 | RNVC: 2

31 Jul 1971

5340-66-136-2620
Buckle Button

661362620
071.116.99: RNCC: 3 | RNVC: 2
901420: RNCC: 5 | RNVC: 9
071.270.99: RNCC: 5 | RNVC: 9

16 May 1992

5340-66-146-0627
Webbing Strap

661460627
790169: RNCC: 3 | RNVC: 2
790169: RNCC: 5 | RNVC: 2

26 Apr 2000

5340-66-157-6217
Rim Lock Set

661576217
EA3062SS70: RNCC: 3 | RNVC: 2

21 Jan 2009

5340-66-132-6681
Rod End Clevis

661326681
11M018-5: RNCC: 3 | RNVC: 2
11M018-5: RNCC: 3 | RNVC: 2
11M018-5: RNCC: 5 | RNVC: 2

24 Apr 1989

5340-66-146-1008
Bowl

661461008
NC35: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-082-6604
S Threaded Standoff

5340-66-129-9413
Rod End Clevis

661299413
A168382: RNCC: 3 | RNVC: 2

5 Jun 1987

5340-66-145-5817
Mounting Plate

661455817
DE250980013: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-080-3488
Lock Assy

660803488
RV40: RNCC: 3 | RNVC: 2

15 Dec 1974

5340-66-152-4808
Mounting Bracket

661524808
YA 437 822 00 14: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-66-066-4254
Angle Bracket

660664254
179348K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-158-7448
Clamping Catch

661587448
UES-1.702: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-66-037-4276
Manual Control Handle

660374276
ADE(M)106-16: RNCC: 3 | RNVC: 2

15 Nov 1996

5340-66-160-3591
Mechanic Equipment Hardware Kit

661603591
1749833: RNCC: 3 | RNVC: 2

25 Jun 2012

5340-66-031-6648
Rod End Connector

660316648
A14996: RNCC: 3 | RNVC: 2

7 Mar 1969

5340-66-148-0576
Nylo Trapeze Handle

661480576
PNP171R: RNCC: 3 | RNVC: 2

18 Jul 2002

5340-66-144-6173
Webbing Strap

661446173
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
00-240503A-30: RNCC: 3 | RNVC: 2
11-240503A-30: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-66-062-9067
Nonmetallic Bumper

660629067
RUBBER BUMPER: RNCC: 3 | RNVC: 1

8 May 1974

5340-66-016-4714
Loop Clamp

660164714
AW20514: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-9959
Angle Bracket

661559959
ARLM0980-1: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-091-0709
Mounting Bracket

660910709
201VVM261: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-152-5606
Retaining Strap

661525606
HRV090000008: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-66-072-1743
Swivel Caster

660721743
L420: RNCC: 3 | RNVC: 2

17 May 1976

5340-66-137-3092
Butt Hinge

661373092
340301: RNCC: 3 | RNVC: 1
1800MMX38MMX1MM THK: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-66-154-7118
Mounting Plate

661547118
ARLM0856-1: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-66-143-1461
Dust And Moisture Seal Protective Cover

661431461
138100 16440 K 0001/14: RNCC: 3 | RNVC: 2
9051490801: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-157-3154
Dust And Moisture Seal Boot

661573154
V10#3: RNCC: 3 | RNVC: 2
V10#3: RNCC: 3 | RNVC: 2
HSA005742: RNCC: 3 | RNVC: 2

7 Oct 2008

5340-66-156-5087
Nut And Bolt Retainer

661565087
ARLM0846-1: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-66-154-3809
Multiple Angle Bracket

661543809
DE252360002: RNCC: 3 | RNVC: 2

9 May 2006

5340-66-147-0708
Mounting Plate

661470708
DE620050033: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-147-7150
Access Cover

661477150
A5241: RNCC: 3 | RNVC: 2

7 Jun 2001

5340-66-019-5629
Expansion Plug

660195629
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-153-7739
Loop Clamp

661537739
949746-2: RNCC: 3 | RNVC: 2
949746-2: RNCC: 5 | RNVC: 2
949746-2: RNCC: 5 | RNVC: 2

26 Oct 2005

5340-66-147-2433
Polisher Assembly

661472433
000/400/GMOWS.3030.2.01: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-147-2321
Lifting Lug

661472321
003/304/GMOWS.3030.06: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-158-8862
Seal Retaining Plate

661588862
MH0079: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-66-072-3727
Loop Clamp

660723727
7MMR: RNCC: 3 | RNVC: 2

12 Nov 1970

5340-66-157-3388
Webbing Strap

661573388
1000190: RNCC: 3 | RNVC: 2
1000190: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-66-161-4066
Mounting Bracket

661614066
0601-30-78862: RNCC: 3 | RNVC: 2
0601-30-78862: RNCC: 5 | RNVC: 2

14 Oct 2013

5340-66-158-1669
Mounting Bracket

661581669
BDI 30400-7-11: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-66-110-6322
Butt Hinge

661106322
5033284000: RNCC: 3 | RNVC: 2

25 Apr 1981

5340-66-149-5670

5340-66-141-9260
General Purpose Resilient Mount

661419260
0005333354: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-66-154-4324
Dust And Moisture Seal Protective Cap-Plug

661544324
DP312: RNCC: 3 | RNVC: 2
949.88.11.303: RNCC: 5 | RNVC: 2

24 May 2006

5340-66-147-8970
Tensionerer Sleeve

661478970
2888-520-1-ITEM 27: RNCC: 3 | RNVC: 2
435 612 73 38: RNCC: 5 | RNVC: 2

5 Dec 2001

5340-66-128-6631
Spacing Threaded Standoff

661286631
999/4/35693/326: RNCC: 3 | RNVC: 2
999/4/38064/011: RNCC: 5 | RNVC: 1

25 Jun 1993

5340-66-157-2870
Bumper

661572870
10026843: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-66-130-0727
Spacer

5340-66-120-9458

5340-66-122-5990
Angle Bracket

5340-66-129-6151
Crank Seat

661296151
4742-2: RNCC: 3 | RNVC: 2
4742-2: RNCC: 3 | RNVC: 2

15 Feb 2000

5340-66-144-7027
Mounting Bracket

661447027
BYG4102: RNCC: 3 | RNVC: 2

4 May 1999

5340-66-134-8333
Catch Plate

661348333
C149-ZP: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-66-161-1639
Mounting Bracket

661611639
15019275: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-66-146-5921
General Purpose Resilient Mount

661465921
33173-90013: RNCC: 3 | RNVC: 2
33173-90013: RNCC: 5 | RNVC: 2

31 May 2000

5340-66-161-0071
Stanchion Assembly

661610071
AM11021-1: RNCC: 3 | RNVC: 2

16 Apr 2013

5340-66-145-7295
Double Angle Bracket

661457295
MHC1130-1: RNCC: 3 | RNVC: 2

22 Oct 1999

5340-66-143-9513
Adapter

661439513
B-525603A: RNCC: 3 | RNVC: 2

21 Nov 1997

5340-66-147-4192
Block Clamp

661474192
0774D38: RNCC: 3 | RNVC: 2
22-0774A-23: RNCC: 3 | RNVC: 2

8 May 2001

5340-66-144-5524
Dust And Moisture Seal Protective Cover

661445524
1675000: RNCC: 3 | RNVC: 2

8 Dec 1998

5340-66-137-6732
Mounting Plate

661376732
044958: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-66-158-6255
Mounting Bracket

661586255
SP98323: RNCC: 3 | RNVC: 2
1951980000: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-66-089-5309
Angle Bracket

5340-66-066-4333
Loop Clamp

5340-66-065-1857
General Purpose Resilient Mount

5340-66-091-8238
Spring Tension Clip

660918238
DM2040: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-156-5022
Mechanic Equipment Hardware Kit

661565022
DA 014: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-66-142-9066
Nonmetallic Bumper

661429066
M174: RNCC: 3 | RNVC: 2
999/4/42556/139: RNCC: 3 | RNVC: 2

27 Feb 1997

5340-66-159-7454
Mounting Plate

661597454
471-90532-143: RNCC: 3 | RNVC: 2

30 Jan 2012

5340-66-032-8862
Core Plug

660328862
202310: RNCC: 3 | RNVC: 2

19 Jul 1969

5340-66-101-5534
Angle Bracket

661015534
1013523: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-66-153-2756
Mounting Bracket

661532756
A210 0104-1: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-146-2815
Dust And Moisture Seal Protective Cap

661462815
1749900: RNCC: 3 | RNVC: 2
CF002: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-66-133-1750
Dust And Moisture Seal Boot

661331750
DA90069000: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
143493: RNCC: 5 | RNVC: 9

5 Sep 1990

5340-66-146-1003
Tap

661461003
NC17: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-155-7490
Angle Bracket

661557490
X50RC468M: RNCC: 3 | RNVC: 2

18 May 2007

5340-66-125-4355
Dust And Moisture Seal Protective Cap

661254355
175-2207: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

18 Apr 1986

5340-66-156-1018
Angle Bracket

661561018
RP407548/A/29: RNCC: 3 | RNVC: 2
RP407548/A/29: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-66-158-7589
Mounting Bracket

661587589
BMA-A09-0052: RNCC: 3 | RNVC: 2
47200: RNCC: 5 | RNVC: 2

28 Jul 2010

5340-66-154-7948
Runner

661547948
471-60801-141: RNCC: 3 | RNVC: 2
506714: RNCC: 5 | RNVC: 2

6 Sep 2006

5340-66-132-7310
Lock Bracket

661327310
DE250250031: RNCC: 3 | RNVC: 2

30 May 1989

5340-66-092-4037
Strap End Clip

660924037
389048999: RNCC: 3 | RNVC: 2

22 Dec 1976

5340-66-146-7006
Spring Tension Clip

661467006
1405623: RNCC: 3 | RNVC: 2

15 Aug 2000

5340-66-085-1315
Lock-Release Lever

660851315
303948: RNCC: 3 | RNVC: 2

25 Mar 1975

5340-66-158-5544
Mounting Plate

661585544
P10193-01: RNCC: 3 | RNVC: 2

24 Mar 2010

5340-66-134-8048
Electronic Equipment Hardware Kit

661348048
675/5/35909/000: RNCC: 3 | RNVC: 2
MX-F307: RNCC: 5 | RNVC: 2

22 Jun 1990

5340-66-147-5404
Webbing Strap

661475404
BCL25 + YT25: RNCC: 3 | RNVC: 2
004-854-01: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-66-142-7541
Stand Base

661427541
SCES12201: RNCC: 3 | RNVC: 1
15257-4: RNCC: 5 | RNVC: 2

31 Oct 1996

5340-66-129-8898
Mounting Bracket

661298898
016AMR394-2: RNCC: 3 | RNVC: 2

6 Apr 2001

5340-66-079-2414
General Purpose Resilient Mount

660792414
3838FX: RNCC: 3 | RNVC: 2
SG00010: RNCC: 3 | RNVC: 2
13148: RNCC: 5 | RNVC: 9

27 Aug 1974

5340-66-144-5464
Webbing Strap

661445464
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503B-30: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-66-146-3790
Disc-Cooling

661463790
010866: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-66-110-1506
Nonmetallic Bumper

661101506
RUBBERBUMPER: RNCC: 3 | RNVC: 1

10 Jun 1983

5340-66-096-4445
Access Cover

660964445
DE230020013: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-147-3130
Webbing Strap

661473130
1841233: RNCC: 3 | RNVC: 2

27 Feb 2001

5340-66-150-6050
Tube Breathing

661506050
NO PRIMARY REF 66-150-6050: RNCC: 3 | RNVC: 2
00350404: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-091-4499
Rod End Connector

660914499
29B807: RNCC: 3 | RNVC: 2

4 Mar 1976

5340-66-143-4432
Door Subframe

661434432
492378: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-122-6051
Bracket

661226051
DE580160511: RNCC: 3 | RNVC: 2

8 Dec 1984

5340-66-152-3220
Lever Latch And Hoo

661523220
ZCP-PAL300: RNCC: 3 | RNVC: 2
ZCP-PAL300: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-66-160-2357
Access Cover

661602357
S2599105: RNCC: 3 | RNVC: 2

3 May 2012

5340-66-136-1178
Mounting Plate

661361178
016AMR314-12: RNCC: 3 | RNVC: 2

14 Nov 1994

5340-66-147-2398
Control Panel

661472398
000/600/GMOWS.3030.01: RNCC: 3 | RNVC: 2
GMOWS-30/30/2-VNO: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-150-2476
Angle Bracket

661502476
NO PRIMARY REF 66-150-2476: RNCC: 3 | RNVC: 2
02331913: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-7722
Mounting Plate

661587722
BMA-A05-0697-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-088-1848
Swivel Caster

660881848
2313-0877910: RNCC: 3 | RNVC: 2

26 Apr 1975

5340-66-154-6656
Mounting Plate

661546656
275Z-0069: RNCC: 3 | RNVC: 2

9 Aug 2006

5340-66-147-8447
Shock Mount Pad

661478447
NALM00068-3: RNCC: 3 | RNVC: 2
NALM00068-3: RNCC: 5 | RNVC: 1

11 Mar 2002

5340-66-127-3995
Mechanical Stop

661273995
401AMR219-2: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-66-123-4529
Hinge

661234529
33-31295-5: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-158-9296
General Purpose Guard Rail Section

661589296
1160-GA-100: RNCC: 3 | RNVC: 2

27 Oct 2010

5340-66-160-6540
Angle Bracket

661606540
ID25-246: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-136-6484
Pressure Gage

661366484
17221-19: RNCC: 3 | RNVC: 2
0099-LL-H31-2181: RNCC: 6 | RNVC: 9

18 Jun 1992

5340-66-026-2177
Retaining Strap

5340-66-140-8916
General Purpose Resilient Mount

661408916
P471-90200-101T10: RNCC: 3 | RNVC: 2

30 May 1995

5340-66-157-7718
Double Angle Bracket

661577718
24005-1: RNCC: 3 | RNVC: 2

23 Mar 2009

5340-66-113-6509
Handwheel

661136509
MLF725: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-038-5291
Tongue

660385291
ADE(M)183-45: RNCC: 3 | RNVC: 2

18 Dec 1970

5340-66-146-3468
Case Sub-Assembly

661463468
2386-96260-00: RNCC: 3 | RNVC: 2

10 Apr 2000

5340-66-150-4147
Screw Thread Insert And Tool Assortment

661504147
NO PRIMARY REF 66-150-4147: RNCC: 3 | RNVC: 2
06462202: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-2269
Mounting Bracket

661552269
471-20065-108: RNCC: 3 | RNVC: 2
521385: RNCC: 5 | RNVC: 2

29 Jan 2007

5340-66-148-4614
Manual Control Lever

661484614
OED-1749-20-02-29: RNCC: 3 | RNVC: 2

10 May 2002

5340-66-155-5236
Bumper

661555236
471-30466-51: RNCC: 3 | RNVC: 2
501773: RNCC: 5 | RNVC: 2

10 Apr 2007

5340-66-150-6059
Dispenser

661506059
NO PRIMARY REF 66-150-6059: RNCC: 3 | RNVC: 2
00819366: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-2312
Cl Seperation Pack

661472312
001/304/GMOWS.3030.06: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-082-9992
Helicoil Insert

660829992
20-98154559: RNCC: 3 | RNVC: 2

24 Jan 1975

5340-66-157-5509
Loop Clamp

661575509
101029: RNCC: 3 | RNVC: 2
101029: RNCC: 5 | RNVC: 2

16 Dec 2008

5340-66-157-3871
Mounting Bracket

661573871
AG-A0330: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-66-143-1462
Dust And Moisture Seal Protective Cover

661431462
138100 16440 K 0001/15: RNCC: 3 | RNVC: 2
9051214056: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-158-2997
Access Cover

661582997
BDI 30400-8-6: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-66-027-4437
Dust And Moisture Seal Protective Plug

660274437
NA1 1-2-8: RNCC: 3 | RNVC: 2
MILC27487: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-161-4462
Mending Plate

661614462
1212450: RNCC: 3 | RNVC: 2

31 Oct 2013

5340-66-148-8194
Webbing Strap

661488194
IN1000: RNCC: 3 | RNVC: 2

27 Aug 2002

5340-66-156-3109
Mounting Plate

661563109
15010473: RNCC: 3 | RNVC: 2

26 Oct 2007

5340-66-133-4038
Dust And Moisture Seal Boot

661334038
DM3005: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-66-128-7311
Spring Tension Clip

661287311
700/2/24638: RNCC: 3 | RNVC: 2

26 Aug 1993

5340-66-136-0631
Mounting Bracket

661360631
26-08182: RNCC: 3 | RNVC: 2
A011538 SHEET 34: RNCC: 3 | RNVC: 2

28 Mar 1992

5340-66-157-5855
Block Clamp

661575855
C05253: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-66-144-0410
Webbing Strap

661440410
1323313: RNCC: 3 | RNVC: 2

23 Feb 1998

5340-66-148-3940
Cover

661483940
C17841: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-157-6604
Dust And Moisture Seal Protective Cover

661576604
RP246220: RNCC: 3 | RNVC: 2

3 Feb 2009

5340-66-143-3945
Hinge Plate

661433945
492043: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-126-1278
Spring Tension Clip

661261278
A201950: RNCC: 3 | RNVC: 2
223978-01: RNCC: 3 | RNVC: 2

2 Nov 1990

5340-66-153-4070
Mounting Plate

661534070
15012781: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-157-8167
Axle

661578167
6331081: RNCC: 3 | RNVC: 2

6 Apr 2009

5340-66-125-3648
Angle Bracket

661253648
DE580160343: RNCC: 3 | RNVC: 2

18 Mar 1986

5340-66-129-9415
Hinge

661299415
F4037: RNCC: 3 | RNVC: 2

5 Jun 1987

5340-66-158-1110
Bumper

661581110
OEM PART 3 G92: RNCC: 3 | RNVC: 2

24 Aug 2009

5340-66-153-2702
Mounting Bracket

661532702
A210 0310: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-158-4759
Angle Bracket

661584759
940-165: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-66-141-6245
Access Cover

661416245
640/2/31342/000: RNCC: 3 | RNVC: 2

27 Jun 1997

5340-66-144-6177
Webbing Strap

661446177
11-240545B-90: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-66-161-3578
Dust And Moisture Seal Protective Cap

661613578
DA75278050: RNCC: 2 | RNVC: 2

23 Sep 2013

5340-66-153-4729
Mounting Bracket

661534729
5211121: RNCC: 3 | RNVC: 2
5211121: RNCC: 5 | RNVC: 2

25 Aug 2005

5340-66-155-9999
Mounting Bracket

661559999
1214375: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-157-8494
Threaded Rod End

661578494
SAKB6F: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-66-049-8248
Turnbuckle

660498248
AL5583-4IN: RNCC: 3 | RNVC: 2

15 Jun 1972

5340-66-159-4107
Headless Straight Rod

661594107
08348803: RNCC: 3 | RNVC: 2
766665: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-66-066-4238
Corner Brace

660664238
174516K: RNCC: 3 | RNVC: 2

27 Feb 1974

5340-66-150-4034
Strapping

661504034
NO PRIMARY REF 66-150-4034: RNCC: 3 | RNVC: 2
05665712: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-159-2687
Angle Bracket

661592687
P10567-888: RNCC: 3 | RNVC: 2
P10567 ITEM 19: RNCC: 5 | RNVC: 2

10 May 2011

5340-66-154-8292
Angle Bracket

661548292
15007999: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-66-046-0424
Clamping Catch

660460424
197006: RNCC: 3 | RNVC: 2

19 Aug 1973

5340-66-128-4719
Webbing Strap

661284719
HYG1833: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-66-138-6394
Mounting Bracket

661386394
8613669: RNCC: 3 | RNVC: 2
3193669: RNCC: 3 | RNVC: 2
8613669: RNCC: 5 | RNVC: 2

2 Mar 1994

5340-66-079-1213
Fusible Plug

660791213
2000344659: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-66-119-4952
Ant Straight Sleeve

661194952
664-00003: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-66-138-8170
Access Cover

661388170
196630-03270: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-66-158-3549
Access Door Hinge

661583549
EH-6A-5G-5-50: RNCC: 3 | RNVC: 2
DF01-602-6: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-66-155-7479
Angle Bracket

661557479
X50QL3157M: RNCC: 3 | RNVC: 2

18 May 2007

5340-66-130-3762
Bracket

661303762
MEA 1307-1: RNCC: 3 | RNVC: 1

21 Apr 1988

5340-66-161-2838
Mounting Bracket

661612838
15018421: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-118-7785
Angle Clamp

661187785
BAS21010: RNCC: 3 | RNVC: 2

2 Sep 1983

5340-66-154-6317
Electronic Equipment Hardware Kit

661546317
SCES13910: RNCC: 3 | RNVC: 2

31 Jul 2006

5340-66-155-1657
Slide Plate

661551657
301 286: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-141-8392
Bellows Expansion

661418392
SXA 1179004: RNCC: 3 | RNVC: 2
SXA 117 9004: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-150-4986
Strap Neoprene Spec

661504986
NO PRIMARY REF 66-150-4986: RNCC: 3 | RNVC: 2
04853257: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-159-4604
Retaining Strap

661594604
1500-04-0310C1: RNCC: 3 | RNVC: 2
QVRL1500040310C1: RNCC: 5 | RNVC: 2

26 Jul 2011

5340-66-159-7448
Turnbuckle

661597448
RF1578-M0608: RNCC: 3 | RNVC: 2

30 Jan 2012

5340-66-141-0215
Block Clamp

661410215
16.SP: RNCC: 3 | RNVC: 2
SI16-ALU: RNCC: 5 | RNVC: 2

10 Aug 1995

5340-66-017-5587
Webbing Strap

5340-66-160-7516
Angle Bracket

661607516
15008359: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-66-099-4112
Adjuster Rod

660994112
3B1234B1: RNCC: 3 | RNVC: 2

17 Sep 1978

5340-66-038-2524
Angle Bracket

660382524
B48361A: RNCC: 3 | RNVC: 2

4 Dec 1970

5340-66-158-0437
Catch Strike

661580437
553.20.09.182: RNCC: 3 | RNVC: 2

6 Jul 2009

5340-66-024-8319
Retaining Strap

660248319
210-259: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-158-7857
Stand Base

661587857
HFSTAND7E: RNCC: 3 | RNVC: 2
DEF(AUST)8767: RNCC: 4 | RNVC: 1
HFSTAND7E: RNCC: 5 | RNVC: 2

3 Aug 2010

5340-66-156-5246
Dust And Moisture Seal Protective Cap

661565246
SS-100DC: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-66-156-4393
Webbing Strap

661564393
10006013-025: RNCC: 3 | RNVC: 2
10006013-025: RNCC: 3 | RNVC: 2
10006013-025: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-66-156-5101
Turnbuckle Body

661565101
471-62810-108: RNCC: 3 | RNVC: 2
501386: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-66-153-6461
Angle Bracket

661536461
47110411108-002: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-139-4339
Nonmetallic Bumper

661394339
X50RC377M: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-66-123-4585
Clamp

661234585
33-53376: RNCC: 3 | RNVC: 2

25 Feb 1986

5340-66-105-4810
Buckle

661054810
20962: RNCC: 3 | RNVC: 2

21 Aug 1990

5340-66-156-5609
Access Cover

661565609
6302332: RNCC: 3 | RNVC: 2
15012897: RNCC: 5 | RNVC: 2

17 Jan 2008

5340-66-150-2028
Support Hook

661502028
NO PRIMARY REF 66-150-2028: RNCC: 3 | RNVC: 2
04057606: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-120-3954
Webbing Strap

5340-66-154-2682
Access Cover

661542682
S0007A1E1836-002: RNCC: 3 | RNVC: 2

10 Apr 2006

5340-66-151-1716
Fuel Tank Strap Sheet

661511716
LTA-A11-0009-01: RNCC: 3 | RNVC: 2
LTA-A11-003 ITEM1: RNCC: 5 | RNVC: 2

2 Jul 2003

5340-66-151-0661
Mounting Plate

661510661
LTA-A05-0356-01: RNCC: 3 | RNVC: 2
LTA-A02-133 ITEM 17: RNCC: 5 | RNVC: 2

29 Apr 2003

5340-66-143-4859
Mounting Plate

661434859
640/2/34284/000: RNCC: 3 | RNVC: 2

19 May 1998

5340-66-158-8071
Turnbuckle

661588071
RF1540: RNCC: 3 | RNVC: 2
P0000346: RNCC: 5 | RNVC: 2

6 Aug 2010

5340-66-158-3731
Mounting Bracket

661583731
AYG0364: RNCC: 3 | RNVC: 2

1 Dec 2009

5340-66-154-8417
Mounting Plate

661548417
15006005: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-66-158-8010
Access Cover

661588010
DEF(AUST)8767: RNCC: 4 | RNVC: 1
4512 133 69461: RNCC: 5 | RNVC: 2

4 Aug 2010

5340-66-088-1829
Recess Handle

660881829
1213-251264: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-149-0748
Buckle

661490748
0840: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-66-134-8841
Ventilator Bracket

661348841
V-00-1A: RNCC: 3 | RNVC: 2

29 Aug 1990

5340-66-147-7585
Assembly Rail

661477585
6671274-1: RNCC: 3 | RNVC: 2
6671274-1: RNCC: C | RNVC: 1

9 Aug 2001

5340-66-134-3357
Mounting Bracket

661343357
A014529 SHT5: RNCC: 3 | RNVC: 1

19 Aug 1991

5340-66-096-7474
Angle Bracket

660967474
3029888: RNCC: 3 | RNVC: 2

8 Feb 1978

5340-66-141-8578
Attachment Lower

661418578
477617900: RNCC: 3 | RNVC: 2
SFP008AP0049: RNCC: 5 | RNVC: 2

19 Jan 1996

5340-66-123-2668
Handwheel

661232668
310455: RNCC: 3 | RNVC: 2

12 Nov 1985

5340-66-156-4127
Angle Bracket

661564127
15013842: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-66-161-1955
Elastic Strap

661611955
BP5685429: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-66-138-2035
Loop Clamp

661382035
532.30.09.269: RNCC: 3 | RNVC: 2

21 Feb 1994

5340-66-159-2171
Double Angle Bracket

661592171
DE253550015: RNCC: 3 | RNVC: 2

7 Apr 2011

5340-66-135-1873
Snap Hook

661351873
RF654: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-66-141-7140
Helical Compression Spring Retainer

661417140
FE1302-080012: RNCC: 3 | RNVC: 2

2 Jan 1996

5340-66-152-2776
Padlock

661522776
NO PRIMARY REF 66-152-2776: RNCC: 3 | RNVC: 2
86761189: RNCC: 5 | RNVC: 2

11 Jun 2004

5340-66-133-2850
Mounting Bracket

661332850
ATS100003: RNCC: 3 | RNVC: 2

21 Aug 1996

5340-66-101-5760
Handle

661015760
R182: RNCC: 3 | RNVC: 2

22 May 1979

5340-66-158-3322
Mounting Plate

661583322
DE253350003: RNCC: 3 | RNVC: 2

17 Nov 2009

5340-66-153-3152
Mounting Plate

661533152
DE252240009: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-66-143-3652
Cap

661433652
142246: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-155-8891
Angle Bracket

661558891
X50RC512: RNCC: 3 | RNVC: 2

25 Jun 2007

5340-66-155-4945
Webbing Strap

661554945
12482: RNCC: 3 | RNVC: 2
12482: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-66-147-7877
Gland Cable

661477877
UAG16A: RNCC: 3 | RNVC: 2

21 Sep 2001

5340-66-160-9197
Mounting Bracket

661609197
15013484-08: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-150-0226
Swivel Caster

661500226
NO PRIMARY REF 66-150-0226: RNCC: 3 | RNVC: 2
04957706: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-144-5221
Mounting Bracket

661445221
A209142-13D: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-66-103-4609
Resilient Mount Plate

661034609
GILV101: RNCC: 3 | RNVC: 2

23 May 1970

5340-66-156-2495
Mounting Bracket

661562495
A2100153: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-66-157-2278
Mounting Bracket

661572278
15QM29427M: RNCC: 3 | RNVC: 2
15QM29427M: RNCC: 5 | RNVC: 2

10 Sep 2008

5340-66-128-5782
Manual Control Lever

661285782
HYG3275: RNCC: 3 | RNVC: 2

28 Aug 1989

5340-66-155-7506
Angle Bracket

661557506
X50QL355B: RNCC: 3 | RNVC: 2

21 May 2007

5340-66-158-3177
Mounting Plate

661583177
BDI 30400-2-2-1: RNCC: 3 | RNVC: 2

9 Nov 2009

5340-66-122-6465
Bracket

661226465
DE580170416: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-66-160-7846
Angle Bracket

661607846
15005547: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-66-160-2605
Mounting Bracket

661602605
NTPSSFPVBSB: RNCC: 3 | RNVC: 2
NTPSSFPVBSB: RNCC: 5 | RNVC: 2
NTPSSFPVBSB: RNCC: 5 | RNVC: 2

15 May 2012

5340-66-154-4687
Dust And Moisture Seal Protective Cap-Plug

661544687
CP1076: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-66-082-9990
Swivel Caster

660829990
16C582N: RNCC: 3 | RNVC: 2
20-98134559: RNCC: 3 | RNVC: 2

24 Jan 1975

5340-66-136-2617
Cylinder Ban Latch

661362617
130.027.00: RNCC: 3 | RNVC: 2

16 May 1992

5340-66-132-0681
General Purpose Access Door

661320681
163P/0215/031 REV 2 ITEM 1: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-66-161-0504
Mortise Lock Set

661610504
565.50: RNCC: 3 | RNVC: 2

3 May 2013

5340-66-137-8081
Helical Compression Spring Retainer

661378081
104200-11180: RNCC: 3 | RNVC: 2

27 Apr 1993

5340-66-093-7828
Mounting Bracket

660937828
B1AP291: RNCC: 3 | RNVC: 2

30 Jan 1977

5340-66-120-6752
Fwd. Hinge Half

661206752
12S1796-11-138: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-023-6279
Retaining Strap

660236279
1162: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-7604
Dust And Moisture Seal Protective Cap

661567604
C-AL-038DC: RNCC: 3 | RNVC: 2
C-AL-038DC: RNCC: 5 | RNVC: 2

26 Mar 2008

5340-66-152-8957
Webbing Strap

661528957
MLC-0050: RNCC: 3 | RNVC: 2

3 Jun 2005

5340-66-155-2967
Blank Panel

661552967
TF01365-1: RNCC: 3 | RNVC: 2

20 Feb 2007

5340-66-153-2663
Mounting Bracket

661532663
A210 0072-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-141-8651
Dust And Moisture Seal Protective Cover

661418651
SFP008AP0054: RNCC: 3 | RNVC: 2
476084900: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-66-146-3450
Case

661463450
2386-49750-00: RNCC: 3 | RNVC: 2

10 Apr 2000

5340-66-153-2630
Mounting Bracket

661532630
A210 0317: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-150-5811
Key Holder

661505811
NO PRIMARY REF 66-150-5811: RNCC: 3 | RNVC: 2
04068705: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-159-6100
Lock Key

661596100
ABLPRKEY: RNCC: 3 | RNVC: 2
ABLPR: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-66-158-3267
Quick Release Plunger

661583267
FPCWN20F010S: RNCC: 3 | RNVC: 2
2 0167-546: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-66-050-8350
Hi Fitting Assembly

660508350
C4WM1231-4: RNCC: 3 | RNVC: 2

20 May 1972

5340-66-157-5487
Mounting Bracket

661575487
X/C/0238/14: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-66-150-0629
Padlock

661500629
NO PRIMARY REF 66-150-0629: RNCC: 3 | RNVC: 2
03381477: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-147-4476
Access Cover

661474476
G46813: RNCC: 3 | RNVC: 2

17 May 2001

5340-66-145-4184
Storage C Latch Kit

661454184
HLA100: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-66-067-5544
Access Door Hinge

5340-66-156-1022
Angle Bracket

661561022
RP407547/A/29: RNCC: 3 | RNVC: 2
RP407547/A/29: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-66-100-8852
Plain Solid Disk

661008852
363PVA45002DET28SH4: RNCC: 3 | RNVC: 2

16 Mar 1979

5340-66-063-3397
Butt Hinge Leaf

660633397
15-9089: RNCC: 3 | RNVC: 2
03953: RNCC: 5 | RNVC: 9

23 May 1970

5340-66-147-7599
Bar Longeron

661477599
6671316-6: RNCC: 3 | RNVC: 2
6671316-6: RNCC: C | RNVC: 1

13 Aug 2001

5340-66-140-6085
Access Cover

661406085
004-016-1: RNCC: 3 | RNVC: 2

17 May 1995

5340-66-158-0071
Dust And Moisture Seal Protective Cap

661580071
JMS2022-9-1: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-151-8618
Access Cover

661518618
9210D07001022: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-66-158-9777
Angle Bracket

661589777
18011110: RNCC: 3 | RNVC: 2

16 Nov 2010

5340-66-156-0216
Mounting Bracket

661560216
ARLM0610-1: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-66-156-6218
Packer

661566218
NALM00695-3: RNCC: 3 | RNVC: 2
NALM00695-3: RNCC: 5 | RNVC: 2

13 Feb 2008

Load More Results