What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 10 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 10 of 29

5340-66-147-0520
Carrying Strap

661470520
036-015: RNCC: 3 | RNVC: 2

23 Nov 2000

5340-66-154-7368
Retaining Strap

661547368
15002195-02: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-66-143-4233
Drain Mounting

661434233
492410: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-142-4598
Webbing Strap

661424598
1233026: RNCC: 3 | RNVC: 2
1233026: RNCC: 3 | RNVC: 2

3 Aug 1996

5340-66-154-8362
Mounting Bracket

661548362
01-0952069: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-66-155-4757
Mounting Bracket

661554757
ARLM0872: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-159-0936
Dust And Moisture Seal Protective Cap-Plug

661590936
DB100770: RNCC: 3 | RNVC: 2
DB100770: RNCC: 3 | RNVC: 2

7 Feb 2011

5340-66-086-4040
Rim Latch

660864040
78722: RNCC: 3 | RNVC: 2
5340MS78722: RNCC: 5 | RNVC: 9

4 Mar 1976

5340-66-146-5945
Loop Clamp

661465945
20022-Z2014: RNCC: 3 | RNVC: 2
20022-Z2014: RNCC: 5 | RNVC: 2

2 Jun 2000

5340-66-128-6226
Synchro Clamp

661286226
HYG4647: RNCC: 3 | RNVC: 2

29 Oct 1991

5340-66-079-0156
Mortise Lock Set

660790156
400BDL: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-66-115-0243
Retaining Strap

661150243
180N20: RNCC: 3 | RNVC: 2
02200755: RNCC: 5 | RNVC: 2

18 Jul 1982

5340-66-132-4997
Snap Hook

661324997
RF655: RNCC: 3 | RNVC: 2

8 May 1990

5340-66-140-4156
Handwheel

661404156
FE85082D125X11: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-079-2417
General Purpose Resilient Mount

660792417
43560: RNCC: 3 | RNVC: 2
1010FX: RNCC: 3 | RNVC: 2
13152: RNCC: 5 | RNVC: 2

27 Aug 1974

5340-66-045-3982
Escutcheon Plate

660453982
62461V294: RNCC: 3 | RNVC: 2

25 Mar 1973

5340-66-067-6947
Helical Compression Spring Retainer

660676947
GB112X: RNCC: 3 | RNVC: 2
W7GBGB112X: RNCC: 5 | RNVC: 9

25 May 1974

5340-66-159-2579
Dust And Moisture Seal Protective Cap

661592579
TAE-6139: RNCC: 3 | RNVC: 2

4 May 2011

5340-66-161-3347
Access Cover

661613347
471-50015-116: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-66-157-2873
Spring Tension Clip

661572873
10026853: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-66-126-6627
Mechanical Stop

661266627
330 0889: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

31 May 1991

5340-66-125-2598
Retaining Strap

661252598
DE580180787: RNCC: 3 | RNVC: 2

17 Dec 1985

5340-66-148-8827
Double Angle Bracket

661488827
C06515: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-66-156-5359
Detent Plunger

661565359
360510: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-66-156-3996
Electronic Equipment Hardware Kit

661563996
CES 20012: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-66-155-1698
Retaining Clip

661551698
ADF041-MC8177-242: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-093-8031
Antipilferage Seal

660938031
TWISTL0CKSECURITYSEAL: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-138-4522
Antipilferage Seal

661384522
HA03308: RNCC: 3 | RNVC: 2
HA03308: RNCC: 5 | RNVC: 2

4 Nov 1993

5340-66-128-5299
Key Holder

661285299
HYG3029: RNCC: 3 | RNVC: 2

12 Oct 1988

5340-66-147-2510
Rinse Bracket

661472510
60327(MOD.SX): RNCC: 3 | RNVC: 2

8 Dec 2000

5340-66-154-1066
Clamping Catch

661541066
HA1053: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-66-144-0859
Snap Hook

661440859
40372: RNCC: 3 | RNVC: 2

12 Jun 1998

5340-66-147-2635
Bracket

661472635
DAS99(MOD.DX): RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-155-5122
Mounting Bracket

661555122
471-41214-1: RNCC: 3 | RNVC: 2
511340: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-66-146-1316
Bottle Filling Rack

661461316
A00007-00664-B-0005: RNCC: 3 | RNVC: 2

25 Jan 2000

5340-66-092-2309
Access Cover

660922309
MAB8-18-0P: RNCC: 3 | RNVC: 2
6863-429-0P: RNCC: 5 | RNVC: 2

23 Aug 1976

5340-66-128-5011
Cover

661285011
9532196020: RNCC: 3 | RNVC: 2
9532196020: RNCC: 5 | RNVC: 2

12 Jan 1988

5340-66-156-9538
Mounting Bracket

661569538
DE250160007: RNCC: 3 | RNVC: 2
DEF(AUST)8372: RNCC: 4 | RNVC: 1

16 Jun 2008

5340-66-155-4803
Module Frame

661554803
11251: RNCC: 3 | RNVC: 2
11251: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-66-085-5149
Rim Lock

660855149
213: RNCC: 3 | RNVC: 2
04070405: RNCC: 5 | RNVC: 2

19 Oct 1975

5340-66-156-4572
Perspex Chuck

661564572
5H1189: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-113-6653
Protective Tooling

661136653
TOOLING FOR 5340-66-101-5720: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-136-3388
Clamp Ring

661363388
014.032.98: RNCC: 3 | RNVC: 2

3 Sep 1992

5340-66-077-9356
Hinged Hasp

660779356
HASP: RNCC: 3 | RNVC: 1

18 Jul 1972

5340-66-158-2973
Mounting Bracket

661582973
M220: RNCC: 3 | RNVC: 2

28 Oct 2009

5340-66-143-3181
Safety Chain

661433181
149940-52: RNCC: 3 | RNVC: 2

7 Apr 1998

5340-66-159-1321
Strap Hinge

661591321
BCH1101: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-66-106-0261
Bolt Bar Head

661060261
DE230010386: RNCC: 3 | RNVC: 2

28 Aug 1980

5340-66-010-1368
Plain Solid Disk

660101368
1144: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-027-2273
Retaining Strap

5340-66-034-5704
Dropside Hinge

5340-66-159-4866
Dust And Moisture Seal Protective Cover

661594866
RP246221: RNCC: 3 | RNVC: 2

8 Aug 2011

5340-66-155-0382
Mounting Bracket

661550382
DE252580068: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-66-132-7796
Clamping Catch

661327796
360169: RNCC: 3 | RNVC: 2

21 Aug 1989

5340-66-158-0274
Access Cover

661580274
7FU5000A41M09: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-66-158-7924
Elect Cabinet Stand

661587924
P0000059: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-66-143-3342
Handle Lifting

661433342
141923: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-131-6727
General Purpose Resilient Mount

5340-66-107-5906
Retaining Clip

661075906
E01991: RNCC: 3 | RNVC: 2

11 Aug 1980

5340-66-130-5043
Bracket

661305043
DE(EMEI)80-2: RNCC: 3 | RNVC: 2

4 Aug 1988

5340-66-084-1676
General Purpose Resilient Mount

660841676
12-75044: RNCC: 3 | RNVC: 2

17 Feb 1975

5340-66-161-3747
Spacing Threaded Standoff

661613747
15016955: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-66-161-2969
Mounting Bracket

661612969
15019294: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-66-153-3161
Mounting Plate

661533161
DE252240010: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-66-155-6911
Stand Base

661556911
128955: RNCC: 3 | RNVC: 2

10 May 2007

5340-66-157-2098
Mounting Bracket

661572098
DA76528004: RNCC: 3 | RNVC: 2

3 Sep 2008

5340-66-141-6199
Dust And Moisture Seal Protective Plug

661416199
015061: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-66-155-2443
Mounting Bracket

661552443
DI-365-8422-MI: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-66-150-7556
Metal Grille

661507556
4101: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-66-153-2698
Mounting Bracket

661532698
A210 0338: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-048-9568
Clamp Bolt Bracket

660489568
360117K: RNCC: 3 | RNVC: 2

10 May 1972

5340-66-152-4622
Catch Strike

661524622
30C: RNCC: 3 | RNVC: 2
30Z: RNCC: 5 | RNVC: 2

27 Jan 2005

5340-66-159-1457
Elastic Strap

661591457
1100-02-0500C9-02: RNCC: 3 | RNVC: 2
QVRL1100020500902: RNCC: 5 | RNVC: 2
1100-02-0500C9-02: RNCC: 6 | RNVC: 9

8 Mar 2011

5340-66-148-9873
Spring-L Retractor

661489873
67-02-04: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-66-134-7427
Double Angle Bracket

661347427
AR466: RNCC: 3 | RNVC: 2

4 May 1990

5340-66-147-4177
Angle Bracket

661474177
CX25-1-M28-0: RNCC: 3 | RNVC: 2

8 May 2001

5340-66-151-1967
Track Stop

661511967
ARLM0571-1: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-66-154-9169
Vent Plug

661549169
23-19198604: RNCC: 3 | RNVC: 2

5 Oct 2006

5340-66-155-4492
General Purpose Resilient Mount

661554492
20Y-54-65820: RNCC: 3 | RNVC: 2
20Y-54-65820: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-66-146-1370
Mounting Bracket

661461370
TYPE V11(02)(STBDFWD): RNCC: 3 | RNVC: 2

27 Jan 2000

5340-66-066-4270
Loop Clamp

660664270
371204K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-018-0002

5340-66-152-7925
Mounting Bracket

661527925
BCMA 0602: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-158-0262
Mounting Plate

661580262
7FD8550A36G01: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-66-146-9582
Dry-Disconn Coupler

661469582
1762D-20: RNCC: 3 | RNVC: 2

23 Oct 2000

5340-66-159-2093
Butt Hinge

661592093
15018487: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-66-152-4316
Mounting Bracket

661524316
15004677: RNCC: 3 | RNVC: 2

8 Dec 2004

5340-66-143-4226
Mounting Plate

661434226
492365: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-147-2490
Female Connector

661472490
004/406/GMOWS.3030.08: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-152-8735
Expansion Plug

661528735
3H-5552: RNCC: 3 | RNVC: 2

24 May 2005

5340-66-154-6952
Double Angle Bracket

661546952
DE252580005: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-154-8732
Mounting Bracket

661548732
15010743: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-66-156-4958
Mounting Bracket

661564958
DA 003: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-66-147-8443
Shock Mount Pad

661478443
NALM00068-4: RNCC: 3 | RNVC: 2
NALM00068-4: RNCC: 5 | RNVC: 1

11 Mar 2002

5340-66-156-7275
Mounting Bracket

661567275
NALM00696-3: RNCC: 3 | RNVC: 2
NALM00696-3: RNCC: 5 | RNVC: 2

10 Mar 2008

5340-66-161-0548
Mounting Plate

661610548
ARLM2156-1: RNCC: 3 | RNVC: 2

7 May 2013

5340-66-152-6136
Mounting Bracket

661526136
1402477: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-66-153-2653
Mounting Bracket

661532653
A210 0290: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-137-3026
Manual Control Handle

661373026
TH 002500: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-66-159-8135
Mechanic Equipment Hardware Kit

661598135
BMA-A08-0214-01: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-140-9251
General Purpose Resilient Mount

661409251
60-012-031R-NR57: RNCC: 3 | RNVC: 2
95418/2: RNCC: 3 | RNVC: 2
98418/46: RNCC: 3 | RNVC: 2

23 Jun 1995

5340-66-034-4222
Rubber Pad

660344222
DA67-1047-129: RNCC: 3 | RNVC: 2

19 Dec 1969

5340-66-154-7318
General Purpose Resilient Mount

661547318
C30-28B: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-66-090-7387
Nonmetallic Bumper

5340-66-090-7392
Bow Handle

5340-66-154-7426
Webbing Strap

661547426
10006014-060: RNCC: 3 | RNVC: 2
10006014-060: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-66-147-7687
Aerosol Sensor

661477687
65-4006L-01: RNCC: 3 | RNVC: 1
65-4006L: RNCC: 3 | RNVC: 2
1438049: RNCC: 5 | RNVC: 2

4 Sep 2001

5340-66-080-3984
Angle Bracket

660803984
8A2004B: RNCC: 3 | RNVC: 2

7 Jul 1972

5340-66-143-4299
Mounting Plate

661434299
492468: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-152-3962
Webbing Strap

661523962
00-447014B: RNCC: 3 | RNVC: 2

23 Oct 2004

5340-66-152-4271
Mounting Bracket

661524271
15004679: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-66-156-9956
Access Cover

661569956
40P: RNCC: 3 | RNVC: 2

1 Jul 2008

5340-66-153-9565
Dust And Moisture Seal Protective Cap

661539565
M0228FM-MR90-05.00 / ITEM: 1: RNCC: 3 | RNVC: 2

3 Jan 2006

5340-66-146-0859
Rear Gable

661460859
438 0522-01: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-107-5179

5340-66-107-5139

5340-66-152-3790
Double Angle Bracket

661523790
DE251930011: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-66-153-2715
Mounting Bracket

661532715
A210 0328-1: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-021-3141
Spring Tension Clip

660213141
22106 1/4 IN.: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-144-0557
Ball

661440557
D0920S: RNCC: 3 | RNVC: 2
D0920S: RNCC: 5 | RNVC: 1
D0920S: RNCC: C | RNVC: 1

23 Jun 1998

5340-66-159-1833
Mounting Bracket

661591833
15005427: RNCC: 3 | RNVC: 2

23 Mar 2011

5340-66-041-6336
General Purpose Resilient Mount

660416336
GH422: RNCC: 3 | RNVC: 2

16 Jun 1971

5340-66-090-1172
Angle Bracket

660901172
AR15-007: RNCC: 3 | RNVC: 2

9 Sep 1975

5340-66-023-6026
Spring Tension Clip

5340-66-129-9437
Clip

5340-66-147-9419
Dust And Moisture Seal Protective Cap-Plug

661479419
ADP050: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-122-5377
Webbing Strap

661225377
DE420010270: RNCC: 3 | RNVC: 2

10 Nov 1984

5340-66-146-0840
Support Foot

661460840
AK30125: RNCC: 3 | RNVC: 2
AK30125: RNCC: 5 | RNVC: 2
AK60125: RNCC: 5 | RNVC: 2

7 Jan 2000

5340-66-086-0151
Chassis Bracket

660860151
600-272: RNCC: 3 | RNVC: 2

2 Jun 1975

5340-66-154-8201
Rod End Connector

661548201
471-60801-156: RNCC: 3 | RNVC: 2
506731: RNCC: 5 | RNVC: 2

12 Sep 2006

5340-66-158-6620
Mounting Bracket

661586620
635-5003: RNCC: 3 | RNVC: 2
1688108: RNCC: 5 | RNVC: 2

19 May 2010

5340-66-153-9631
Fan Seat Casing

661539631
M0228FM-AV-09.00/ITEM:6: RNCC: 3 | RNVC: 2

5 Jan 2006

5340-66-158-7700
Mechanical Stop

661587700
BME-A05-0222-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-134-4294
Dust And Moisture Seal Protective Plug

661344294
704-48166-00: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-66-157-9638
Spacing Threaded Standoff

661579638
433-31030: RNCC: 3 | RNVC: 2

3 Jun 2009

5340-66-147-8612
Angle Bracket

661478612
F/2888-550-035E: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-035E: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-124-9611
Support Spring Asse

661249611
BX/41286 REFS 1-2 AND 38312/279C: RNCC: 3 | RNVC: 2
38312/279ABC: RNCC: 3 | RNVC: 2
146P-4203-003 ITEMS 76 AND 77: RNCC: 3 | RNVC: 2
H/42636 ITEMS 76 AND 77: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-66-155-5195
Access Cover

661555195
471-41243-915: RNCC: 3 | RNVC: 2
512587: RNCC: 5 | RNVC: 2

5 Apr 2007

5340-66-024-9428
Dust And Moisture Seal Protective Cap

660249428
CA20-16: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-033-7915
Clevis

5340-66-033-4974
Housing Seal

5340-66-087-6634
Key Holder

660876634
1213-26533: RNCC: 3 | RNVC: 2
04068608: RNCC: 5 | RNVC: 2

20 Apr 1975

5340-66-147-3230
Mounting Bracket

661473230
002-475-801: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-66-151-8880
Crank Handle

661518880
WHC: RNCC: 3 | RNVC: 2
STEDWHC: RNCC: 5 | RNVC: 2

24 Feb 2004

5340-66-112-3457
Lock-Release Lever

661123457
W154-173: RNCC: 3 | RNVC: 2

12 May 1992

5340-66-155-9233
Angle Bracket

661559233
P10150: RNCC: 3 | RNVC: 2

29 Jun 2007

5340-66-153-9758
Mounting Bracket

661539758
S0E21A1E1830-404: RNCC: 3 | RNVC: 2

9 Jan 2006

5340-66-154-7823
Shelf Bracket

661547823
15004439: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-66-145-8448
Cover

661458448
863.761.00: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-66-154-4749
Headless Straight Rod

661544749
DE252130125: RNCC: 3 | RNVC: 2

7 Jun 2006

5340-66-137-3091
Butt Hinge

661373091
340301: RNCC: 3 | RNVC: 1
1800MMX25.5MMX1MM THK: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-66-087-7655
Retaining Strap

660877655
1213-26773: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-087-7287
Butt Hinge

660877287
1213-265245: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-138-8418
Retaining Clip

661388418
2531702: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-66-139-1585
Mounting Bracket

661391585
DE250530092: RNCC: 3 | RNVC: 2

9 May 1994

5340-66-155-2243
Webbing Strap

661552243
DE252680000: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-66-160-7138
Mounting Bracket

661607138
90-3492-01: RNCC: 3 | RNVC: 2

7 Nov 2012

5340-66-154-8549
Mounting Bracket

661548549
15009929: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-147-2588
Panel

661472588
DAP15506HO: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-014-4881
Retaining Strap

5340-66-152-4825
Cran Handle Stowage

661524825
DE251680014: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-66-143-3963
Mounting Plate

661433963
492108: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-147-2721
Bracket

661472721
DWA13: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-146-4050
Hoist Arm

661464050
EU2423MF: RNCC: 3 | RNVC: 2

8 May 2000

5340-66-153-3283
Manual Control Lever

661533283
RE61RWHTML061: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-66-066-4260
Corner Brace

660664260
179555K: RNCC: 3 | RNVC: 2

27 Feb 1974

5340-66-156-6240
Mortise Lock Set

661566240
JM30SC: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-66-043-7351
Tee Hinge

660437351
R40A: RNCC: 3 | RNVC: 1

25 Aug 1971

5340-66-134-7980
Multiple Angle Bracket

661347980
BH1: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-66-150-2032
Support Hook

661502032
NO PRIMARY REF 66-150-2032: RNCC: 3 | RNVC: 2
01659706: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-9206
Mounting Bracket

661549206
471-50807-130: RNCC: 3 | RNVC: 2
506042: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-66-160-8638
Mounting Bracket

661608638
P10553-00-S-AA11: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-160-7842
Double Angle Bracket

661607842
15019300: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-66-157-5721
Cover Strip

661575721
15017607: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-66-156-5195
General Purpose Resilient Mount

661565195
CBC4529: RNCC: 3 | RNVC: 2
CBC4529: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-66-158-5070
Mounting Plate

661585070
7FD8550A42G01: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-66-154-7427
Webbing Strap

661547427
10006014-080: RNCC: 3 | RNVC: 2
10006014-080: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-66-145-4798
Mounting Bracket

661454798
608/2/57749/000: RNCC: 3 | RNVC: 2

28 Sep 1999

5340-66-161-1479
Spring Tension Clip

661611479
42828P: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-66-112-3438
Swivel Caster

661123438
HUR 200X/XP: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-66-143-7273
Mounting Bracket

661437273
658/2/06286/000: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-66-145-4326
Mounting Bracket

661454326
608/1/57970/000: RNCC: 3 | RNVC: 2

17 Sep 1999

5340-66-044-0088
Button Plug

660440088
142026: RNCC: 3 | RNVC: 2

1 Sep 1971

5340-66-127-7892
Visual Se Cable Tie

661277892
197: RNCC: 3 | RNVC: 2
197: RNCC: 3 | RNVC: 2
A700180: RNCC: 5 | RNVC: 9

6 Jan 1987

5340-66-154-7363
Retaining Strap

661547363
15002195-01: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-66-157-9195
General Purpose Resilient Mount

661579195
503 13 27-01: RNCC: 3 | RNVC: 2
503 13 27-01: RNCC: 5 | RNVC: 2

15 May 2009

5340-66-142-4416
Nonmetallic Bumper

661424416
515031: RNCC: 3 | RNVC: 2
471-40205-108: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-66-158-0239
Door Button

661580239
7FA1010A05G17: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-66-152-4603
Retaining Clip

661524603
HPS6: RNCC: 3 | RNVC: 2
00246925: RNCC: 5 | RNVC: 2
00246925: RNCC: 5 | RNVC: 2

21 Jan 2005

5340-66-153-2726
Mounting Bracket

661532726
A210 0305: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-150-0664

5340-66-144-4551
Doorknob

661444551
F8005: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-66-158-0159
Mounting Plate

661580159
1728-BH-0872-01: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-134-4945
Turnbuckle

661344945
RF217: RNCC: 3 | RNVC: 2

7 Nov 1991

5340-66-128-7688
Access Cover

661287688
HCF12DK: RNCC: 3 | RNVC: 2

31 May 1994

5340-66-131-5888
Extension Clip

661315888
3240149R1: RNCC: 3 | RNVC: 2

17 Dec 1988

5340-66-154-8848
General Purpose Access Door

661548848
8077-1016: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-66-160-9207
Angle Bracket

661609207
15013485-10: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-147-2503
Spigot

661472503
010/401/GMOWS.3030.07: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-156-1443
Catch Strike

661561443
DE252220023: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-66-088-5404
Relay Clip

660885404
1213-5591957: RNCC: 3 | RNVC: 2

15 Jul 1975

5340-66-131-5762
Bracket Kit

661315762
152911HD: RNCC: 3 | RNVC: 2
152911HD: RNCC: 3 | RNVC: 2
3251578R91: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-66-143-0979
Surface Bolt

661430979
1791: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-158-2844
Access Cover

661582844
HYG3497: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-66-031-0895
Clamp

660310895
9463105705: RNCC: 3 | RNVC: 2

17 Dec 1968

5340-66-156-3465
Mounting Plate

661563465
15016521: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-66-123-8513
Mounting Bracket

661238513
ARLM0118-008: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-66-148-6792
Caster Jack Body

661486792
FE-10466-002: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-66-144-8010
Runner

661448010
35-27005-30: RNCC: 3 | RNVC: 2

2 Mar 1999

5340-66-156-9557
Handle Grip

661569557
TBS-HGH: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-66-156-4594
Angle Bracket

661564594
15015977: RNCC: 3 | RNVC: 2

30 Nov 2007

5340-66-160-1099
Mounting Bracket

661601099
WF901-16X5 ZPCG: RNCC: 3 | RNVC: 2
121194: RNCC: 5 | RNVC: 2

2 Apr 2012

5340-66-125-4747
Nonmetallic Bumper

661254747
JAPB2: RNCC: 3 | RNVC: 2
DF01-541-2: RNCC: 3 | RNVC: 2

22 Apr 1986

5340-66-159-6372
Rod End Clevis

661596372
CLV83RH: RNCC: 3 | RNVC: 2
HSA006185: RNCC: 5 | RNVC: 2

16 Nov 2011

5340-66-145-4192
Bail Handle

661454192
HHA100: RNCC: 3 | RNVC: 2

11 Aug 1999

5340-66-155-3394
Rod End Connector

661553394
275C-0229: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-66-155-0873
Clamping Catch

661550873
08-005-0002: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-66-155-9136
Runner

661559136
471-50809-239: RNCC: 3 | RNVC: 2
504053: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-126-7479
Bow Handle

661267479
09420-01903: RNCC: 3 | RNVC: 2

22 May 1986

5340-66-157-5167
Mounting Bracket

661575167
V0507-CE-1550: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-66-153-9397
Manual Control Lever

661539397
BDI D17500-61: RNCC: 3 | RNVC: 2

19 Dec 2005

5340-66-156-0969
Dust And Moisture Seal Protective Cap

661560969
CLVGCAP: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-66-126-7793
Clamp

661267793
X50MD371: RNCC: 3 | RNVC: 2
X50MD371: RNCC: 3 | RNVC: 2

17 Jun 1986

5340-66-139-3289
Mounting Bracket

661393289
DE250530347: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-66-102-4403
Webbing Strap

5340-66-146-1520
Support

661461520
535839 01: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-152-7987
Retaining Strap

661527987
48RU3100: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-66-152-6078
Locking Bar

661526078
C22799: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-66-051-8420
Electrical-Mechanical Equipment Post

660518420
53228800080: RNCC: 3 | RNVC: 2

3 Jul 1972

5340-66-017-9825
Dust Protective Cap

5340-66-020-7795
Dus Protective Plug

5340-66-140-2840
General Purpose Resilient Mount

661402840
17/1600/1-55: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-66-137-4334
Access Cover

661374334
K57135: RNCC: 3 | RNVC: 2

15 Jan 1993

5340-66-151-8052
Spacing Threaded Standoff

661518052
238644270000: RNCC: 3 | RNVC: 2
238644270000: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-154-3514
Access Cover

661543514
DE252490040: RNCC: 3 | RNVC: 2

3 May 2006

5340-66-098-2478
Expansion Shield

660982478
NAR34: RNCC: 3 | RNVC: 2

22 Aug 1978

5340-66-145-2847
Retaining Clamp Assembly

661452847
6141030127: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-66-147-6656
Dust And Moisture Seal Boot

661476656
TE9: RNCC: 3 | RNVC: 2
TE9: RNCC: 5 | RNVC: 2

12 Nov 2001

5340-66-120-6745
Fwd. Hinge Half

661206745
12S1796-11-127: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-137-8588
T Bracket

661378588
128172-08100: RNCC: 3 | RNVC: 2

29 Apr 1993

5340-66-154-3726
Mounting Bracket

661543726
DE251540025: RNCC: 3 | RNVC: 2

8 May 2006

5340-66-131-5772
Retaining Clip

661315772
294030316: RNCC: 3 | RNVC: 2
294030316: RNCC: 3 | RNVC: 2
3251490R1: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-66-052-4541
Angle Bracket

5340-66-067-2108
Hand Crank

5340-66-146-7790
Coupling Rod

661467790
SF D40 2600: RNCC: 3 | RNVC: 2

15 Sep 2000

5340-66-123-9995

5340-66-125-3060
Retaining Strap

5340-66-125-2954
Angle Bracket

661252954
DE230010618: RNCC: 3 | RNVC: 2

29 Jan 1986

5340-66-145-5759
Sliding Block

661455759
10114022: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-66-140-3903
Snap Hook

661403903
RF6220: RNCC: 3 | RNVC: 2
RF944: RNCC: 5 | RNVC: 9

21 Mar 1995

5340-66-060-9068
Handwheel

660609068
S3436: RNCC: 3 | RNVC: 2

19 Mar 1974

5340-66-147-2434
Po Housing Assembly

661472434
000/401/GMOWS.3030.04: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-158-1196
Mounting Plate

661581196
367HDM013: RNCC: 3 | RNVC: 2
367HDM013: RNCC: 5 | RNVC: 2

27 Aug 2009

5340-66-121-7593
Snap Hook

661217593
RF652: RNCC: 3 | RNVC: 2
00751213: RNCC: 5 | RNVC: 2

17 May 1984

5340-66-155-5601
Mounting Plate

661555601
16DF55: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-66-019-5760
Hinged Hasp

660195760
920X65MM: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5340-66-147-7750
Crosshead

661477750
A5261: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-66-129-5839
Mounting Bracket

661295839
10D063223: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-66-157-8176
Access Cover

661578176
30008: RNCC: 3 | RNVC: 2

6 Apr 2009

5340-66-158-5563
Seal Retaining Plate

661585563
P10215-03-03: RNCC: 3 | RNVC: 2

24 Mar 2010

5340-66-160-2215
Mounting Plate

661602215
BMP-A05-3001-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-153-9441
Support

661539441
PLATE 30651-09H-0609: RNCC: 3 | RNVC: 2

20 Dec 2005

5340-66-046-3670
Webbing Strap

5340-66-154-9005
Wear Pad

661549005
15014081: RNCC: 3 | RNVC: 2

3 Oct 2006

5340-66-153-6134
Swivel Caster

661536134
622800: RNCC: 3 | RNVC: 2
JOCKEY WHEEL 800KG: RNCC: 5 | RNVC: 2

29 Sep 2005

5340-66-149-0652
Metal Grille

661490652
EC125: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-66-147-1955
Stator

661471955
RR E031 2205: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-66-153-9663
Mounting Plate

661539663
M0228FH-HG30-04.00 / ITEM: 5: RNCC: 3 | RNVC: 2

5 Jan 2006

5340-66-155-7260
Double Angle Bracket

661557260
X50MK32B: RNCC: 3 | RNVC: 2

16 May 2007

5340-66-088-1841
Bow Handle

660881841
1213-251291: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-139-9987
Access Cover

661399987
PNP40A: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-66-130-7149
Dust Cover

661307149
RANMME1753: RNCC: 3 | RNVC: 2

27 Apr 1988

5340-66-149-9445
Retaining Strap

661499445
NO PRIMARY REF 66-149-9445: RNCC: 3 | RNVC: 2
02416154: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-158-5581
Mounting Bracket

661585581
P10143-01: RNCC: 3 | RNVC: 2

24 Mar 2010

5340-66-138-9738
Lock

661389738
102314: RNCC: 3 | RNVC: 2
0080-00-010-2314: RNCC: C | RNVC: 1

21 Dec 1993

5340-66-153-4577
Headless Straight Rod

661534577
TDC 3272: RNCC: 3 | RNVC: 2
21222702-112: RNCC: 5 | RNVC: 2

23 Aug 2005

5340-66-061-7016
Dust And Moisture Seal Protective Cap

660617016
MEM0LCH210: RNCC: 3 | RNVC: 2

5 Aug 1973

5340-66-129-5832
Rod End Clevis

661295832
10D063030: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-66-157-5716
Retaining Strap

661575716
10006013-090: RNCC: 3 | RNVC: 2
10006013-090: RNCC: 3 | RNVC: 2
10006013-090: RNCC: 5 | RNVC: 2

23 Dec 2008

5340-66-158-2263
Mounting Plate

661582263
BMU-A05-3025-01: RNCC: 3 | RNVC: 2
BMU-A05-3025: RNCC: 5 | RNVC: 2

5 Oct 2009

5340-66-147-7684
Ca Sensor Assembly

661477684
65-4005L-01: RNCC: 3 | RNVC: 1
65-4005L: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-66-085-5143
Key Blank

660855143
600-1225EH: RNCC: 3 | RNVC: 2

19 Oct 1975

5340-66-132-4803
Permanent Magnet

661324803
SUA2-63: RNCC: 3 | RNVC: 2

30 Mar 1990

5340-66-150-5055
Mounting Bracket

661505055
NO PRIMARY REF 66-150-5055: RNCC: 3 | RNVC: 2
00179537: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-152-5539
Padlock

661525539
245/50/120KA: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-66-149-8386
Coat And Hat Hook

661498386
NO PRIMARY REF 66-149-8386: RNCC: 3 | RNVC: 2
04679217: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-66-144-0126
Electronic Equipment Hardware Kit

661440126
MX-F250: RNCC: 3 | RNVC: 2
DE530020044: RNCC: 3 | RNVC: 2

18 Dec 1997

5340-66-158-1431
Manual Control Handle

661581431
KV20137: RNCC: 3 | RNVC: 2
KV20137: RNCC: 5 | RNVC: 2

3 Sep 2009

5340-66-159-1671
Mounting Bracket

661591671
DE253650011: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-66-138-6859
Angle Bracket

661386859
074.284.00: RNCC: 3 | RNVC: 2
074.284.00: RNCC: 3 | RNVC: 2
130.010.00: RNCC: 5 | RNVC: 2

18 Mar 1994

5340-66-154-1298
Mounting Plate

661541298
DE252480008: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-66-148-8654
Mounting Bracket

661488654
OED 1631: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-66-160-3421
Dirt And Liquid Deflector

661603421
00-202106: RNCC: 3 | RNVC: 2
00-202106: RNCC: 5 | RNVC: 2

20 Jun 2012

5340-66-155-4493
General Purpose Resilient Mount

661554493
20Y-54-65811: RNCC: 3 | RNVC: 2
20Y-54-65811: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-66-011-7545
Headle Straight Rod

5340-66-060-0731
Rod End Clevis

5340-66-060-3227
Dust And Moisture Seal Boot

660603227
P4186: RNCC: 3 | RNVC: 2

22 Jun 1973

5340-66-161-2769
Mounting Bracket

661612769
15018167-02: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-66-144-6476
Webbing Strap

661446476
43-1041: RNCC: 3 | RNVC: 2
FYD1041: RNCC: 5 | RNVC: 2

12 Feb 1999

5340-66-160-8526
Mounting Bracket

661608526
1400-02-0305W2: RNCC: 3 | RNVC: 2

7 Feb 2013

5340-66-161-3769
Mounting Bracket

661613769
FB2400-31: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-66-155-8964
Spear Holder

661558964
471-50807-150: RNCC: 3 | RNVC: 2
506056: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-146-5051
Snap Hook

661465051
40320: RNCC: 3 | RNVC: 2

6 Jun 2000

5340-66-142-9701
Ca Retainer Bracket

661429701
DE590360077: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-158-1992
Dust And Moisture Seal Protective Cap-Plug

661581992
SF5409: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-66-148-3932
Cover

661483932
C11190: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-150-3937
Butt Hinge

661503937
NO PRIMARY REF 66-150-3937: RNCC: 3 | RNVC: 2
04082600: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-021-2283
Rim Lock Set

660212283
203: RNCC: 3 | RNVC: 1
303SCAO: RNCC: 3 | RNVC: 2
ARMY(AUST)6504: RNCC: 4 | RNVC: 1
303 LOCKWOOD: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-66-146-7033
Handle And Tape Ass

661467033
142550: RNCC: 3 | RNVC: 2

14 Aug 2000

5340-66-129-2031
Metal Grille

661292031
69/82FIG4B: RNCC: 3 | RNVC: 1

16 Sep 1987

5340-66-142-8884
Webbing Strap

661428884
43-0071: RNCC: 3 | RNVC: 2
43-0071: RNCC: 3 | RNVC: 2
43-0071: RNCC: 3 | RNVC: 2

20 Jan 1997

5340-66-150-2039
Support Hook

661502039
NO PRIMARY REF 66-150-2039: RNCC: 3 | RNVC: 2
04964100: RNCC: 5 | RNVC: 2

19 Nov 2003

5340-66-120-6744
Fwd. Hinge Half

661206744
12S1796-11-125: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-144-2912
Butt Hinge

661442912
R42-2843: RNCC: 3 | RNVC: 2

2 Oct 1998

5340-66-140-5826
Angle Bracket

661405826
004-256: RNCC: 3 | RNVC: 2

8 Nov 1995

5340-66-147-2631
Bracket

661472631
DAS60050: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-156-5606
Mounting Plate

661565606
6302322: RNCC: 3 | RNVC: 2
15012909: RNCC: 5 | RNVC: 2

16 Jan 2008

5340-66-155-1201
Mounting Bracket

661551201
471-40205-120: RNCC: 3 | RNVC: 2
515191: RNCC: 5 | RNVC: 2

7 Dec 2006

5340-66-094-0164
Mounting Bracket

660940164
2403: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-145-9610
Fusible Plug

661459610
C08980: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-66-054-8913
Loop Clamp

660548913
H311: RNCC: 3 | RNVC: 2

30 Oct 1972

5340-66-097-8829
Spring Tension Clip

660978829
J: RNCC: 3 | RNVC: 2

26 May 1978

5340-66-161-3730
Extension Drawer Slide

661613730
145QDA-16-P: RNCC: 3 | RNVC: 2
45QDA-16-P: RNCC: 5 | RNVC: 2
1052101P-1: RNCC: 5 | RNVC: 2

27 Sep 2013

5340-66-117-9101
Angle Bracket

661179101
350A51-2004-20: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-66-068-2037
Dust And Moisture Seal Boot

660682037
605930-159: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-66-153-9894
Turnbuckle

661539894
RF1574-0706: RNCC: 3 | RNVC: 2

12 Jan 2006

5340-66-161-0373
Mechanical Stop

661610373
BP5685652: RNCC: 3 | RNVC: 2

1 May 2013

5340-66-145-5791
An Blanking Plate

661455791
DE250980212: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-146-2948
End Rate

661462948
AP 1179.6: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-66-156-1431
Retaining Strap

661561431
DE252220014: RNCC: 3 | RNVC: 2

5 Sep 2007

5340-66-146-6952
Fire Damper

661466952
MSD-PO-SB-670-320-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-085-8673
Plain Solid Disk

660858673
NO PRIMARY REF 66-085-8673: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-146-5280
Dust And Moisture Seal Protective Cover

661465280
PT008-25 BLACK: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-66-147-8648
Actuator

661478648
598655: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-66-155-6482
Mounting Bracket

661556482
X50QB344: RNCC: 3 | RNVC: 2

2 May 2007

5340-66-154-3687
Qui Mount Bracket

661543687
DE252490011: RNCC: 3 | RNVC: 2

5 May 2006

5340-66-146-9618
Cable And Chain Ten

661469618
517969: RNCC: 3 | RNVC: 2

24 Oct 2000

5340-66-128-8218
Antipilferage Seal

5340-66-154-9620
Mounting Bracket

661549620
ARLM0784-1: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-66-142-4631
Mounting Bracket

661424631
471-90423-103T07: RNCC: 3 | RNVC: 2
516785: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-130-0736
Spacer

661300736
079104: RNCC: 3 | RNVC: 2

17 Aug 1987

5340-66-156-2980
Rod End Clevis

661562980
15007609: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-66-093-0244
Access Cover

660930244
E117D27802: RNCC: 3 | RNVC: 2

3 Nov 1976

5340-66-154-6096
Mounting Plate

661546096
6.230.3015: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-161-1756
Multiple Angle Bracket

661611756
15019555: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-66-048-5593
Webbing Strap

660485593
401586: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

21 Mar 1972

5340-66-143-4461
Mounting Plate

661434461
492622: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-141-9828
Mounting Plate

661419828
5433244: RNCC: 3 | RNVC: 2

2 Feb 1996

5340-66-093-5695
Line Supporting Strap

660935695
045-100: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-66-112-7626
Seal Retaining Plate

661127626
553.30.09.347: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-66-158-6494
Electronic Equipment Hardware Kit

661586494
800-80041-0: RNCC: 3 | RNVC: 2

10 May 2010

5340-66-159-2757
General Purpose Access Door

661592757
D-2461: RNCC: 3 | RNVC: 2

12 May 2011

5340-66-150-0496
Tee Hinge

661500496
NO PRIMARY REF 66-150-0496: RNCC: 3 | RNVC: 2
03090017: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-147-2597
Panel

661472597
DAP276A: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-056-4110
Handwheel

660564110
11: RNCC: 3 | RNVC: 2

14 Feb 1973

5340-66-155-8903
Mounting Bracket

661558903
471-50809-124: RNCC: 3 | RNVC: 2
502558: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-031-3979
Electrical-Mec Post

5340-66-156-3165
Mounting Plate

661563165
15013539: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-66-161-2704
Mounting Bracket

661612704
15017917: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-66-161-2806
Webbing Strap

661612806
10006013-150: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-66-156-4731
General Purpose Resilient Mount

661564731
15015843: RNCC: 3 | RNVC: 2

4 Dec 2007

5340-66-145-4677
Mounting Bracket

661454677
608/2/57517/010: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-66-156-4548
Angle Bracket

661564548
15013575-01: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-158-3707
Dust And Moisture Seal Protective Cover

661583707
79786336: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-66-156-3903
Plain Solid Disk

661563903
15013114: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-66-156-6307
Tie Rod

661566307
1Z 592652: RNCC: 3 | RNVC: 2

14 Feb 2008

5340-66-158-0122
Dust And Moisture Seal Protective Cap

661580122
15014988: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-157-1504
Mounting Bracket

661571504
DA90199000: RNCC: 3 | RNVC: 2

18 Aug 2008

5340-66-148-3253
Loop Clamp

661483253
RF1050: RNCC: 3 | RNVC: 2

18 Jul 2002

5340-66-150-5812
Key Holder

661505812
MYH2679: RNCC: 3 | RNVC: 2
04068909: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-160-6561
Dust And Moisture Seal Protective Cap-Plug

661606561
AST 10L: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-138-7080
Mounting Bracket

661387080
120270-66090: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-66-033-0727
Access Cover

660330727
DC1981: RNCC: 3 | RNVC: 2

1 Aug 1969

5340-66-160-7775
Double Angle Bracket

661607775
15018766: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-66-153-0924
Connector

661530924
FA9799ADAPTORTAW: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-66-159-0899
Retaining Strap

661590899
DB100352: RNCC: 3 | RNVC: 2
DB100352: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-66-154-5579
Mounting Plate

661545579
008-02053-001: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-66-155-4776
Mounting Bracket

661554776
196630-05711: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-66-149-2666
Spring Tension Clip

661492666
NO PRIMARY REF 66-149-2666: RNCC: 3 | RNVC: 2
29173200: RNCC: 5 | RNVC: 2

24 Mar 2003

5340-66-043-1388
Assembled Nut Retainer

660431388
854716R11: RNCC: 3 | RNVC: 2

25 Aug 1971

5340-66-156-4686
Rigid Caster

661564686
600EHPR16STWHL: RNCC: 3 | RNVC: 2
600EHPR16TWSTWHL: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-66-144-0360
Door Handle

661440360
504 07550: RNCC: 3 | RNVC: 2

21 Nov 1997

5340-66-139-4461
Brackets Welded

661394461
DE250530132: RNCC: 3 | RNVC: 2

23 Jan 1995

5340-66-152-1528
Auxiliary Equipment

661521528
CES12302: RNCC: 3 | RNVC: 2

22 Jul 2004

5340-66-152-3928
Lock Bolt

661523928
00-447033A: RNCC: 3 | RNVC: 2

23 Oct 2004

5340-66-077-9377
Settle-Bed Hook

660779377
810: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-152-7831
Mounting Bracket

661527831
HRV120101005: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-160-7105
Butt Hinge

661607105
15018495: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-66-159-7506
Loop Clamp

661597506
EN4113S08WH: RNCC: 3 | RNVC: 2
EN4113S08WH: RNCC: 5 | RNVC: 2

3 Feb 2012

5340-66-085-8719
Hookbolt Stopper

660858719
16-6462: RNCC: 3 | RNVC: 2

8 Jan 1976

5340-66-033-1803
Webbing Strap

660331803
DC3042-2: RNCC: 3 | RNVC: 2

11 Aug 1969

5340-66-157-7502
Loop Holder

661577502
B4477-1: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-66-155-8976
Mounting Bracket

661558976
X50RH4102M: RNCC: 3 | RNVC: 2

26 Jun 2007

5340-66-153-2592
Oxy Indexing Sleeve

661532592
NO PRIMARY REF 66-153-2592: RNCC: 3 | RNVC: 2
10617660: RNCC: 5 | RNVC: 2
CIG 518466: RNCC: 5 | RNVC: 2

4 Jul 2005

5340-66-152-3786
Double Angle Bracket

661523786
DE250900065: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-66-154-3819
Mounting Bracket

661543819
DE252450012: RNCC: 3 | RNVC: 2

9 May 2006

5340-66-111-4776
General Purpose Resilient Mount

661114776
R78P: RNCC: 3 | RNVC: 2

28 Feb 1983

5340-66-112-9025
Expansion Shield

661129025
D6038: RNCC: 3 | RNVC: 2

3 May 1982

5340-66-157-8219
Locking Mechanism

661578219
1196979: RNCC: 3 | RNVC: 2

6 Apr 2009

5340-66-067-5101
Cushioning Pad

660675101
ZD01056: RNCC: 2 | RNVC: 2
Z4ZD01056: RNCC: 5 | RNVC: 9

1 Sep 1974

5340-66-145-5222
Metering Tube Assem

661455222
SP6637A: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-66-147-9411
Dust And Moisture Seal Protective Cap

661479411
ADC050: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-147-2666
Manifold Assembly

661472666
DLC79C: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-139-0949
Loop Clamp

661390949
112653: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-66-150-7304
Sleeve

661507304
SLF31A: RNCC: 3 | RNVC: 2

24 Apr 2003

5340-66-141-6693
Dust And Moisture Seal Protective Cap

661416693
SCES12164: RNCC: 3 | RNVC: 1
ZODIACF470: RNCC: 3 | RNVC: 1
2108: RNCC: 5 | RNVC: 2

12 Sep 1996

5340-66-150-7488
Clamping Catch

661507488
701S-ASS: RNCC: 3 | RNVC: 2
701S-ASS: RNCC: 5 | RNVC: 2

16 Jun 2003

5340-66-155-3717
Screw Thread Insert And Tool Assortment

661553717
0964 948 900: RNCC: 3 | RNVC: 2
0964 948 900: RNCC: 5 | RNVC: 2
0964 948 900: RNCC: 5 | RNVC: 2

14 Mar 2007

5340-66-145-2164
Angle Bracket

661452164
NE0128-G: RNCC: 3 | RNVC: 2

24 Jun 1999

5340-66-157-7026
Retaining Strap

661577026
TYPH05002A: RNCC: 3 | RNVC: 2

18 Feb 2009

5340-66-160-6804
Mounting Bracket

661606804
G333302: RNCC: 3 | RNVC: 2
1008: RNCC: 5 | RNVC: 2

16 Oct 2012

5340-66-037-7513
Tee Hinge

660377513
ADE(V)94-158 ISSUE 1: RNCC: 3 | RNVC: 2

6 Nov 1970

5340-66-067-6835
Retaining Clip

660676835
ADD(A)22-6: RNCC: 3 | RNVC: 2
V6VFA0005: RNCC: 5 | RNVC: 9

20 Jul 1974

5340-66-062-8690
Dust And Moisture Seal Protective Cap

660628690
18CP: RNCC: 3 | RNVC: 2

2 Jun 1974

5340-66-133-3745
Mounting Actuator Plate

661333745
521.20.09.073: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-66-145-2031
Pneumatic Valv Key

661452031
193615: RNCC: 3 | RNVC: 2

16 Aug 1999

5340-66-139-1430
Spring Tension Clip

661391430
DE610070012: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-66-144-6172
Webbing Strap

661446172
11-240545A-30: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-66-144-8146
Dust And Moisture Seal Protective Cap-Plug

661448146
132900011: RNCC: 3 | RNVC: 2
132-900-011: RNCC: 5 | RNVC: 2

23 Mar 1999

5340-66-160-2439
Mounting Plate

661602439
BMA-A07-0095-01: RNCC: 3 | RNVC: 2

7 May 2012

5340-66-082-9993
Helicoil Insert

660829993
20-99164559: RNCC: 3 | RNVC: 2

24 Jan 1975

5340-66-147-2502
Flange

661472502
009/401/GMOWS.3030.07: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-151-2295
Retainer

661512295
7FA1000A08G05: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-66-156-0976
Locking Device

661560976
90500: RNCC: 3 | RNVC: 2
90500-TPL77-B12: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-66-090-1163
Angle Bracket

5340-66-153-2625
Mounting Bracket

661532625
A210 0322: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-027-9062
Spring Holder

660279062
105-300: RNCC: 3 | RNVC: 2

22 Sep 1968

5340-66-143-9560
Dust And Moisture Seal Protective Plug

661439560
20994: RNCC: 3 | RNVC: 2

25 Nov 1997

5340-66-138-9575
Rod Flame Thrower

661389575
3740-97-151-2678: RNCC: 3 | RNVC: 2

12 Nov 1993

5340-66-156-6835
Manual Control Handle

661566835
471-90081-14: RNCC: 3 | RNVC: 2
471-90081-14: RNCC: 3 | RNVC: 2
525242: RNCC: 5 | RNVC: 2

26 Feb 2008

5340-66-118-1304
Stop Flexible Condu

661181304
350A27-1137-22: RNCC: 3 | RNVC: 2

11 Jun 1985

5340-66-156-2515
Butt Hinge Leaf

661562515
A2100204: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-66-154-8267
General Purpose Access Door

661548267
15005609: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-66-122-6970
Bridge Clamp

5340-66-108-4962
Loop Clamp

661084962
150-1543-000: RNCC: 3 | RNVC: 2

22 May 1981

5340-66-158-2386
Mounting Plate

661582386
BMU-A05-3090-01: RNCC: 3 | RNVC: 2
BMU-A05-3090: RNCC: 5 | RNVC: 2
BMU-A05-3090-01: RNCC: 5 | RNVC: 2
BMU-A05-3090: RNCC: 5 | RNVC: 2

8 Oct 2009

5340-66-120-5009
Dust And Moisture Seal Protective Cap

661205009
8004003: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
F55548004003: RNCC: 5 | RNVC: 2

9 Jun 1984

5340-66-157-7551
Mounting Bracket

661577551
NTC7667: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-66-143-3965
Roller

661433965
492114: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-158-0170
Mounting Bracket

661580170
1728-BH-0920-01: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-145-2778
Dust And Moisture Seal Protective Cover

661452778
ML-033268-0000Z: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-66-139-2929
Electronic Equipment Hardware Kit

661392929
MX-F213: RNCC: 3 | RNVC: 2
DE530020002: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-104-8201
Retaining Strap

5340-66-156-4979
Mounting Bracket

661564979
DA 004: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-66-142-6360
Access Cover

661426360
197774: RNCC: 3 | RNVC: 2

14 Dec 1996

5340-66-141-5487
Mounting Bracket

661415487
DE250530365: RNCC: 3 | RNVC: 2
DE250530365: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-66-149-0846
Mounting Plate

661490846
HYG9981: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-66-131-6382
Loop Clamp

661316382
377193C11: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-155-6066
Retaining Strap

661556066
X50MB336P10: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-66-090-7884
Mounting Bracket

660907884
8007: RNCC: 3 | RNVC: 2

24 Mar 1976

5340-66-097-0718
Retaining Clip

660970718
281804: RNCC: 3 | RNVC: 2

21 Apr 1978

5340-66-133-4595
Nut And Bolt Locking Plate

661334595
09169-10007: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-66-159-5749
Mounting Bracket

661595749
042532A-01: RNCC: 3 | RNVC: 2

4 Oct 2011

5340-66-120-6618
Swivel Caster

661206618
SPEEDFRAMESWIVELCASTER: RNCC: 3 | RNVC: 1

13 Sep 1984

5340-66-152-5618
Nonmetallic Bumper

661525618
HRV010202003: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-66-120-4200
General Purpose Resilient Mount

661204200
L77573: RNCC: 3 | RNVC: 2

2 Jun 1984

5340-66-153-6506
Angle Bracket

661536506
TIS-005: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-125-2739
Angle Bracket

661252739
DE580180726: RNCC: 3 | RNVC: 2

2 Jan 1986

5340-66-044-1779
General Purpose Resilient Mount

660441779
M145: RNCC: 3 | RNVC: 2
08731106: RNCC: 5 | RNVC: 2

24 Jan 1972

5340-66-143-3656
Locating Plate

661433656
142438: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-156-4373
Door Holder

661564373
15016419: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-66-128-4475
Loop Clamp

661284475
5154190040: RNCC: 3 | RNVC: 2
5154190040: RNCC: 5 | RNVC: 2

28 Oct 1987

5340-66-155-4514
Retaining Clip

661554514
04050-11612: RNCC: 3 | RNVC: 2
04050-11612: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-66-161-2579
Mounting Bracket

661612579
BP5685638: RNCC: 3 | RNVC: 2

8 Aug 2013

5340-66-144-6483
Retraining Latch

661446483
43-1921-5A: RNCC: 3 | RNVC: 2
FYD1921/5A: RNCC: 3 | RNVC: 2

12 Feb 1999

5340-66-054-6600
General Purpose Resilient Mount

660546600
ADE(V)155-179: RNCC: 3 | RNVC: 2

10 Dec 1972

5340-66-146-3478
Bag

661463478
240130A: RNCC: 3 | RNVC: 2
240130A: RNCC: 3 | RNVC: 2

10 Apr 2000

5340-66-154-6461
Mounting Bracket

661546461
553.10.09.123: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-66-146-3503
Panel

661463503
240459B: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-138-4622
Turnbuckle

661384622
RF1560: RNCC: 3 | RNVC: 2

12 Nov 1993

5340-66-105-2397
Mounting Plate

661052397
DA76509005: RNCC: 3 | RNVC: 2
SM1495-02: RNCC: 5 | RNVC: 2

14 Jul 1980

5340-66-141-8991
Access Door Hinge

661418991
SFP008AP0061: RNCC: 3 | RNVC: 2
487151210: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-66-139-6925

5340-66-144-6030

5340-66-110-8502
Pipe Hanger

661108502
183: RNCC: 3 | RNVC: 1

5 Dec 1981

5340-66-048-1276
Access Cover

660481276
100B12: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-66-033-0450
Spacing Threaded Standoff

660330450
VT226: RNCC: 3 | RNVC: 2

27 Jun 1969

5340-66-161-1707
Double Angle Bracket

661611707
15020086: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-153-3629
Mounting Bracket

661533629
BDI 15632: RNCC: 3 | RNVC: 2

27 Jul 2005

5340-66-154-8023
Bow Handle

661548023
471-60801-118: RNCC: 3 | RNVC: 2
506688: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-115-3353
Split Tubular Clip

661153353
026381: RNCC: 3 | RNVC: 2

18 Jul 1982

5340-66-104-1286
Retaining Clip

661041286
B226803: RNCC: 3 | RNVC: 2

12 Feb 1971

5340-66-152-1310
Webbing Strap

661521310
DE251330005: RNCC: 3 | RNVC: 2

25 Jun 2004

5340-66-150-4033
Strapping

661504033
NO PRIMARY REF 66-150-4033: RNCC: 3 | RNVC: 2
05665110: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-3662
Double Angle Bracket

661543662
DE251560004: RNCC: 3 | RNVC: 2

5 May 2006

5340-66-146-5558
Access Cover

661465558
RR B061 2810: RNCC: 3 | RNVC: 2

15 Jun 2000

5340-66-152-7571
Butt Hinge

661527571
DE251830028: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-66-158-3066
Mounting Bracket

661583066
800-360001: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-66-159-5923
Bumper

661595923
A1-21560-230/1: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-66-138-8155
Mounting Bracket

661388155
120380-66280: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-140-5825
Block Assembly

661405825
004-157: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-157-6879
Plunger

661576879
SS PLUNGER: RNCC: 3 | RNVC: 1
SS PLUNGER: RNCC: 5 | RNVC: 1

12 Feb 2009

5340-66-159-8409
Manual Control Lever

661598409
3952080105: RNCC: 3 | RNVC: 2
SP98290: RNCC: 5 | RNVC: 2

1 Mar 2012

5340-66-158-5667
Mounting Bracket

661585667
P10168: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-158-7801
Mounting Plate

661587801
1203-3622: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-155-8715
Multiple Angle Bracket

661558715
X50RC59A: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-66-151-8665
Access Cover

661518665
9210D09001022: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-66-122-6247
Clamp

661226247
7MD2113: RNCC: 3 | RNVC: 2
A7MD2113: RNCC: 3 | RNVC: 2

10 Oct 1984

5340-66-144-9866
Padlock

661449866
SA6245: RNCC: 3 | RNVC: 2
6245SA: RNCC: 3 | RNVC: 2

21 Jun 1999

5340-66-145-7628
Access Cover

661457628
489 5306-02: RNCC: 3 | RNVC: 2

22 Oct 1999

Load More Results