5331-99-947-9179

110087 SHT.85FRNCC: 5 | RNVC: 9 | DAC: 9110087-1751/85RNCC: 5 | RNVC: 9 | DAC: 9 25 Apr 1991 5331-99-947-9179

| DAC: 2 25 Apr 1991 5330-99-873-9799 Gasket A4-19446RNCC: 3 | RNVC: 2 | DAC: 2 25 Apr 1991 5331-99-947-9179

1991 5310-99-422-7179 Shouldered And Recessed Washer 8431RNCC: 3 | RNVC: 2 | DAC: 2 28 Apr 1981 5331-99-947-9179

4030-14-419-9487 4030144199487 144199487 is an item consisting of three or four parts, two of which form a grooved body and have tapered threads that are held firmly in place by rounded hexagonal nuts.

5310-34-038-3496 5310340383496 340383496 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.