5331-14-479-1667

https//www.nsnlookup.com /cage Beuchat International (CAGE Code F3438) 9 | DAC: 4 16 Jun 1995 5331-14-479-1667

2000 4810-14-476-5191 Actuator Adjusting Sleeve 200091RNCC: 3 | RNVC: 9 | DAC: 4 16 Jun 1995 5331-14-479-1667

3040-01-407-7562 3040014077562 014077562 is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.

3040-01-407-6061 3040014076061 014076061 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

3040-01-407-6060 3040014076060 014076060 is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). the other hole(s) connect(s) to connecting link, rigid; wire rope assembly, single leg; or clevis, rod end; to provide transmission of movement to other parts of the mechanism. see also bell crank. for manually operated items see lever, manual control.