5331-14-419-1002

www.nsnlookup.com /cage Safran Aerosystems Ex Safran (CAGE Code F1976) 2 | DAC: 4 24 Jan 1990 5331-14-419-1002

5340-98-800-0052 5340988000052 988000052 is a cylindrical item which may have wrenching and/or driving facilities and/or shoulders. it is designed to be inserted in a drilled, tapped or a pretapped hole, or molded or pressed into soft material to reduce the size of a tapped hole; to provide threads; to add strength, and/or to prevent stripping. it is one of the following: (1) a one-piece, flanged or unflanged, internally threaded item which may have external threads, and/or serrations around the periphery of the collar, designed to engage a serrated lock ring which is not included with the item; (2) a one-piece precision coiled wire; (3) a two-piece item consisting of an internally threaded cylinder and a mating externally threaded part; or (4) a one-piece internally threaded item whose outside diameter is tapered and/or knurled and/or with fin(s). the internal thread of the item may have a locking feature. excludes items having a sleeve on on its under portion which can be clinched or crimped. excludes bushing,machine thread; nut,plain,knurled; nut,plain,round; nut,plain,clinch and nut,self-locking,clinch. see also nut,plain,plate

5365-99-800-0052 5365998000052 998000052 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5340-98-800-0052 5340988000052 988000052

1220-00-800-0052 1220008000052 008000052