5331-14-370-8649

-2270Rotary Switch5930999532270 999532270 SR112 https//www.nsnlookup.com /fsg-53/fsc-5331/fr 5331-14-370-8649
O-Ring 5331143708649 143708649 WB262A01237BVNL 12,37X2,62-7DF710A 01237C6200A64C8 12,37X2,62K710
12-37X2-62-64C8 12,37X2,62-64C8 SR112 -64C8 SR112-7DF710A 12-37X2-62-80V013A WB262A01237BV3L 01237C62A3U64C8

5331-14-421-0470 5331144210470 144210470 is a nonmetallic circular item with an aperature, having a solid round cross-section. they are used primarily for sealing. for items with other than round cross section, see packing,preformed. for noncircular items with a round cross-section, see seal,nonmetallic round section and rubber,round section.

3040-00-560-1377 3040005601377 005601377 is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). see also cylinder, actuating, linear. do not use if a more specific name applies.

nonmetallic round section and rubber,round section. https//www.nsnlookup.com /fsg-53/fsc-5331/fr 5331-14-370-8649
O-Ring 5331143708649 143708649 5331-14-370-8649 5331143708649 143708649 is a nonmetallic circular

3040-01-042-8623 3040010428623 010428623 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.