5331-22-274-9004

| RNVC: 2 | DAC: 4 19 Nov 1992 2835-14-449-4826 https//www.nsnlookup.com /fsg-53/fsc-5331/dk 5331-22-274-9004
O-Ring 5331222749004 222749004,201595 5331-22-274-9004 5331222749004 222749004 is a nonmetallic

1986 5330-22-118-7041 Preformed Packing SR 4.5X1 NBR 75RNCC: 3 | RNVC: 2 | DAC: 4 29 Mar 1984 5331-22-274-9004

4730-01-331-6608 4730013316608 013316608 is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.

4730-01-332-5950 4730013325950 013325950 is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.

4730-01-331-6609 4730013316609 013316609 is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. the other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.