Premium Information is available for this item - Upgrade for $1 a day
5330-01-542-5819
Packing Material
5330015425819 015425819 HT3000RT-250
Any material specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals or liquids and used to create a tight seal. It is supplied in loose form or in coils, spirals, spools or cut lengths, usually having a square or round cross section. For rubber items having a round cross section, see RUBBER ROUND SECTION. Excludes ROPE, ASBESTOS; CALKING COTTON; and CALKING LEAD. See also PACKING, PREFORMED; and OAKUM. View more Packing Material
November 2023
5
Marketplace 5330-01-542-5819
Request a Quotation from participating marketplace vendors
Related Documents 5330-01-542-5819 1+ Documents (More...)
HT3000RT-250 PACKING MATERIAL 4 RO NS Request Quotation Updated Every Day 5330-01-542-5819 RQST NE Updated
Every Day 5330-01-542-5819 RQST Updated Every Day 5330-01-542-5819 RQST NE Related Documents 5330-01
Restrictions 5330-01-542-5819
5330-01-542-5819 is a Packing Material that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item has been determined to be hazardous and information is contained in the Hazardous Materials Information Resource System (HMIRS). This item does not contain a precious metal.
End Users 5330-01-542-5819
- US Air Force (FGGI)
- Effective Date:
- 1 Aug 2006
- Australia (ZA01)
- Effective Date:
- 1 Apr 2013
Approved Sources 5330-01-542-5819
- Part Number
- Manufacturer
- Status
- HT3000RT-250
- Manufacturer
- 1NPE1 - Aviation Devices And Electronic (Active)
- Primary Buy
- Primary Buy
Datasheet 5330-01-542-5819
- Characteristic
- Specifications
- FIIG
- Specifications
- A26800
- End Item Identification [AGAV]
- F-15 Aircraft
- Length [ABRY]
- 12.000 Feet Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Gasket Tape, 2.5 Inch X 12 Ft; Reduced Thickness
- Special Features [FEAT]
- Pre-Cured Material Is Polyurethane Tape Sealant With Figerglass Carrier And Ptfe Backing, Width Is 2.5 Inch; Reduced Thickness
- Temp Rating [ABJH]
- -65.0 Deg Fahrenheit And 135.0 Deg Fahrenheit
Weapon Systems (WSDC) 5330-01-542-5819
DLA Procurement Analysis 5330-01-542-5819
- Last Stock Position:
- 84 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5330-01-542-5819
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Air Force (DF)
- RO
- Subscribe
- 1
- RO
- Oct 2021
- Department of the Air Force (DF)
- RO
- Subscribe
- 1
- RO
- Oct 2020
- Department of the Air Force (DF)
- RO
- Subscribe
- 1
- RO
- Oct 2019
- Department of the Air Force (DF)
- RO
- Subscribe
- 1
- RO
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Air Force (DF)
- F
- K
- U/I Contains 12 Ft
- 00000000012FT
- K
- Department of the Navy (DN)
- N
- K
- U/I Contains 12 Ft
- 00000000012FT
- K
- Defense Logistics Agency (DS)
- I
- K
- U/I Contains 12 Ft
- 00000000012FT
- K
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5330-01-542-5819
Freight Information 5330-01-542-5819
5330-01-542-5819 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5330-01-542-5819 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5330-01-542-5819 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5330-01-542-5819 is not classified as a special type of cargo when transported by water. 5330-01-542-5819 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5330-01-542-5819
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5330-01-542-5819 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E318V8160
- 21 Aug 2018
- Subscribe
- 13
- Subscribe
- Subscribe
- Subscribe
- SPE5E317V3242
- 24 Jul 2017
- Subscribe
- 5
- Subscribe
- Subscribe
- Subscribe
- SPE5EJ17V5737
- 26 Jun 2017
- Subscribe
- 5
- Subscribe
- Subscribe
- Subscribe
- SPE5EJ17V5255
- 26 May 2017
- Subscribe
- 6
- Subscribe
- Subscribe
- Subscribe
- SPE5EJ16V6962
- 28 Sep 2016
- Subscribe
- 6
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5330-01-542-5819 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: