Premium Information is available for this item - Upgrade for $1 a day
5330-01-422-8749
Nonmetallic Channel Seal
5330014228749 014228749 SM-A-800500 SM-A-800500-3 896 COMPOUND 1650
An item fabricated from NONMETALLIC CHANNEL. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items except for molded corners, end cut(s), and mounting facilities, such as mounting hole(s), slot(s), press fit buttons, and the like, must be one continuous cross section. It may have fabric, cord, or metal reinforcement. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes GASKET; GROMMET, NONMETALLIC; and PACKING, PREFORMED. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC CHANNEL. View more Nonmetallic Channel Seal
November 2023
1
Marketplace 5330-01-422-8749
Request a Quotation from participating marketplace vendors
Related Documents 5330-01-422-8749 5+ Documents (More...)
/fsg-53/fsc-5330/us
SM-A-800500-3 SEAL 18 FT NS Request Quotation FedMall Updated Every 15 Minutes 5330-01-422-8749 BUY NE
FedMall Updated Every Day 5330-01-422-8749 RQST NE Updated Every Day 5330-01-422-8749 RQST Updated Every
Nonmetallic Channel Seal 5330014228749 Upgrade your Account Upgrade 5330-01-422-8749Nonmetallic
Channel Seal5330014228749 014228749 SM-A-800500 SM-A-800500-3 896 COMPOUND 1650 An item fabricated from
-3 896 COMPOUND 1650 An item fabricated from NONMETALLIC CHANNEL.
-3 896 COMPOUND 1650 An item fabricated from NONMETALLIC CHANNEL. https//www.nsnlookup.com /fsg-66/fsc
/fsg-53/fsc-5330/us
//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-422-9333 Nonmetallic Channel Seal 5330014229333 SM-A-800500
NumberManufacturerStatus737 COMPOUND 1650 77969 - Rubbercraft Corporation Of (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 SM-A-800500
Restrictions 5330-01-422-8749
5330-01-422-8749 is a Nonmetallic Channel Seal that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5330-01-422-8749
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5330-01-422-8749
- US Army (A919)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CL
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2011
Approved Sources 5330-01-422-8749
- Part Number
- Manufacturer
- Status
- SM-A-800500-3
- Manufacturer
- 80063 - Us Army Communications & Electronics (Active)
- Primary Buy
- Primary Buy
- 896 COMPOUND 1650
- 77969 - Rubbercraft Corporation Of (Active)
- Secondary Buy
- Secondary Buy
- SM-A-800500
- 80063 - Us Army Communications & Electronics (Active)
- Related Drawing
- Related Drawing
Datasheet 5330-01-422-8749
- Characteristic
- Specifications
- FIIG
- Specifications
- A032A0
- Material [MATT]
- Rubber Chloroprene Class Cr Overall
- Material Document And Classification [MDCL]
- Mil-R-3065 Sc510a1b1c2e3f2k2mz1z2z3 Mil Spec Single Material Response Overall
- Color [HUES]
- Black
- Web Width [ADXH]
- 0.125 Inches Nominal
- Left Side Flange Height [ADXJ]
- 0.310 Inches Nominal
- Special Features [FEAT]
- U-Shaped
Weapon Systems (WSDC) 5330-01-422-8749
DLA Procurement Analysis 5330-01-422-8749
- Last Stock Position:
- 28 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5330-01-422-8749
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Army (DA)
- FT
- Subscribe
- 1
- FT
- Oct 2021
- Department of the Army (DA)
- FT
- Subscribe
- 1
- FT
- Oct 2020
- Department of the Air Force (DF)
- FT
- Subscribe
- 1
- FT
- Apr 2020
- US Marine Corps (DM)
- FT
- Subscribe
- 1
- FT
- Oct 2019
- Department of the Army (DA)
- FT
- Subscribe
- 1
- FT
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5330-01-422-8749
Freight Information 5330-01-422-8749
5330-01-422-8749 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194050. A Sub NMFC of X. It has a NMFC Description of GASKETS/RINGS PLUMBING FIXTURES. 5330-01-422-8749 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 78100 which rates the freight between FCL and LCL. 5330-01-422-8749 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5330-01-422-8749 is not classified as a special type of cargo when transported by water. 5330-01-422-8749 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5330-01-422-8749
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5330-01-422-8749 2 Records
Contracting Technical Data File (CTDF) 5330-01-422-8749 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: