Premium Information is available for this item - Upgrade for $1 a day
5330-01-387-4239
Gasket
5330013874239 013874239 5003421 NON-ASBESTOS 5003421 5330PL1036708
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR. View more Gasket
November 2023
16
Marketplace 5330-01-387-4239
Request a Quotation from participating marketplace vendors
Related Documents 5330-01-387-4239 5+ Documents (More...)
United States (US) 4. 5330-01-387-4239 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 5330-01-387-4239 RQST Updated Every Day 5330-01-387-4239 RQST NE Related
how to enable JavaScript in your web browser . 6220-12-367-8366Dome Light6220123678366 123678366 5003421
www.nsnlookup.com /fsg-62/fsc-6220/de 6220-12-367-8366 Dome Light 6220123678366 123678366,5003421 5003421
Restrictions 5330-01-054-4663 DEMIL: A | DEMILI https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-387-4239
Gasket 5330013874239 013874239 Documents 5330-01-387-4239 3+ Documents ( More... ) https//www.nsnlookup.com
Gasket 5330013874239 013874239 - Upgrade for $1 a day Upgrade your Account Upgrade 5330-01-387-
4239Gasket5330013874239 013874239 5003421 NON-ASBESTOS 5003421 5330PL1036708 A deformable material which
www.nsnlookup.com /fsg-62/fsc-6220/de 6220-12-367-8366 Dome Light 6220123678366 123678366,5003421 5003421
in your web browser . 2530-12-196-6646Air Brake Actuator Assembly2530121966646 121966646 I/69739 5003421
Restrictions 5330-01-387-4239
5330-01-387-4239 is a Gasket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5330-01-387-4239
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5330-01-387-4239
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Poland (WP01)
- Effective Date:
- 1 Sep 2007
- Singapore (YJ01)
- Effective Date:
- 1 Mar 1999
- Belgium (ZB01)
- Effective Date:
- 1 May 1998
- Netherlands (ZN01)
- Effective Date:
- 1 Mar 2015
- Portugal (ZP01)
- Effective Date:
- 1 Nov 1996
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
- Norway (ZT01)
- Effective Date:
- 1 Dec 1997
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5330-01-387-4239
- Part Number
- Manufacturer
- Status
- 5003421 NON-ASBESTOS
- Manufacturer
- 99167 - Hamilton Sundstrand Corporation (Active)
- Primary Buy
- Primary Buy
- 5003421
- 99167 - Hamilton Sundstrand Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5330PL1036708
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5330-01-387-4239
- Characteristic
- Specifications
- FIIG
- Specifications
- A032A0
- Aperture Diameter [ABVL]
- 0.454 Inches Minimum And 0.484 Inches Maximum
- Bolt Hole Quantity [AECS]
- 2
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.124 Inches Nominal
- Cross-Sectional Shape Style [AAGR]
- Solid Single Or Composition
- Cross-Sectional Thickness [ADVM]
- 0.047 Inches Nominal
- Environmental Attribute Code [ENAC]
- Asbestos Alternative Products
- Hole Diameter [AAUB]
- 0.205 Inches Minimum And 0.229 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-G-12803 Ty F712400e45-6 Mil Spec All Material Responses Overall
- Material [MATT]
- Plastic Overall Or Rubber Overall Or Leather Overall Or Fiber Overall
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.391 Inches Minimum And 0.421 Inches Maximum
- Overall Length [ABHP]
- 1.485 Inches Minimum And 1.545 Inches Maximum
- Overall Width [ABMK]
- 0.782 Inches Minimum And 0.842 Inches Maximum
- Special Features [FEAT]
- Contains Non-Asbestos Material
Weapon Systems (WSDC) 5330-01-387-4239
DLA Procurement Analysis 5330-01-387-4239
- Last Stock Position:
- 371 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5330-01-387-4239
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5330-01-387-4239
Freight Information 5330-01-387-4239
5330-01-387-4239 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194050. A Sub NMFC of X. It has a NMFC Description of GASKETS/RINGS PLUMBING FIXTURES. 5330-01-387-4239 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 78100 which rates the freight between FCL and LCL. 5330-01-387-4239 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5330-01-387-4239 is not classified as a special type of cargo when transported by water. 5330-01-387-4239 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5330-01-387-4239
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5330-01-387-4239 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: