Premium Information is available for this item - Upgrade for $1 a day
5330-01-380-5186
Packing Retainer
5330013805186 013805186 SAE-AS8791/1 21260 FIND 24 V3E10116 ITEM 43 M8791/1-110 AS8791 MIL-R-8791
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE. View more Packing Retainer
November 2023
20
Marketplace 5330-01-380-5186
Request a Quotation from participating marketplace vendors
Related Documents 5330-01-380-5186 5+ Documents (More...)
MIL-R-8791 RETAINER,PACKING 179 EA NS Request Quotation M8791/1-110 RETAINER,PACKING 9 EA NS Request
,PACKING 9 EA NS Request M8791/1-025 AS8791/1 MIL-R-8791/1 An item designed to fit over a packing gland
AS8791/1 M8791/1-332CP MIL-R-8791/1 An item designed to fit over a packing gland by mating with a
DCL-1600-DN-CVN(SHT5)PART8 SAE-AS8791/1-640 M8791/1-640 MIL-R-8791/1 An item designed to fit over https
M8791/1-336 AS8791/1 MIL-R-8791/1 845-7286652 ITEM 46 2643-852-01 ITEM 46 An item designed to fit
DCL-1600-DN-CVN(SHT5)PART8 SAE-AS8791/1-640 M8791/1-640 MIL-R-8791/1 An item designed to fit over
M8791/1-229 AS8791/1 MIL-R-8791/1 An item designed to fit over a packing gland by mating with a surface
MS28774-434 H623-0507-39 566-6985434-39 AS8791/1 M8791/1-434 MIL-R-8791/1 An item designed to fit
V1E10601 ITEM 50 V1E10639-35 M8791/1-214 5D3-03870-9 AS8791 MIL-R-8791 An item designed to fit over
/1 MIL-R-8791/1 An item designed to fit over a packing gland by mating with a surface M8791/1-126 AS8791
Restrictions 5330-01-380-5186
5330-01-380-5186 is a Packing Retainer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5330-01-380-5186
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5330-01-380-5186
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKEJBHD
- Spain (YB01)
- Effective Date:
- 1 May 2003
- Singapore (YJ01)
- Effective Date:
- 1 Nov 2007
- France (ZF01)
- Effective Date:
- 1 Mar 2001
- Republic of Korea (ZH01)
- Effective Date:
- 1 Oct 2006
- United Kingdom (ZK01)
- Effective Date:
- 1 Oct 2002
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
Approved Sources 5330-01-380-5186
- Part Number
- Manufacturer
- Status
- SAE-AS8791/1
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- M8791/1-110
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- AS8791
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- M8791/1-110
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-R-8791
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AS8791
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- M8791/1-110
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 21260 FIND 24
- 78062 - Sargent Aerospace & Defense, Llc (Active)
- Advisory Reference
- Advisory Reference
- V3E10116 ITEM 43
- 99517 - Vacco Industries (Active)
- Advisory Reference
- Advisory Reference
- M8791/1-110
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5330-01-380-5186
- Characteristic
- Specifications
- FIIG
- Specifications
- A032A0
- Center Hole Diameter [ADYT]
- 0.373 Inches Nominal
- Cross-Sectional Shape Style [AAGR]
- Square/Rectangular
- Cross-Sectional Height [ADVN]
- 0.052 Inches Minimum And 0.056 Inches Maximum
- Material Document And Classification [MDCL]
- Sae-As8791 National Spec Single Material Response Overall
- Material [MATT]
- Plastic Polytetrafluoroethylene Overall
- Nondefinitive Spec/Std Data [ZZZT]
- 1 Type
- Joint Type [AQNE]
- Scarf-Peripheral Overall
- Peripheral Diameter [ADYU]
- 0.545 Inches Nominal
Weapon Systems (WSDC) 5330-01-380-5186
DLA Procurement Analysis 5330-01-380-5186
- Last Stock Position:
- 761 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5330-01-380-5186
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5330-01-380-5186
Freight Information 5330-01-380-5186
5330-01-380-5186 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194050. A Sub NMFC of X. It has a NMFC Description of GASKETS/RINGS PLUMBING FIXTURES. 5330-01-380-5186 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 78100 which rates the freight between FCL and LCL. 5330-01-380-5186 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5330-01-380-5186 is not classified as a special type of cargo when transported by water. 5330-01-380-5186 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5330-01-380-5186
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5330-01-380-5186 3 Records
Contracting Technical Data File (CTDF) 5330-01-380-5186 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: