Premium Information is available for this item - Upgrade for $1 a day
5330-01-301-5998
Gasket
5330013015998 013015998 JLM121 LO1359 LL-HK6-2219
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR. View more Gasket
May 2023
7
Marketplace 5330-01-301-5998
Request a Quotation from participating marketplace vendors
Related Documents 5330-01-301-5998 3+ Documents (More...)
Gasket 5330013015998 013015998,JLM121 5330-01-301-5998 5330013015998 013015998 is a deformable
Surface Treatment [CWSG]SolderTerminal Type And Quantity [TTQY]10 PinTest Data Document [TEST]14933-Lo1359
Restrictions 5330-01-301-5998
5330-01-301-5998 is a Gasket that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5330-01-301-5998
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHXHD
Approved Sources 5330-01-301-5998
- Part Number
- Manufacturer
- Status
- JLM121
- Manufacturer
- 02750 - Eaton Aerospace Llc (Active)
- Incomplete Reference
- Incomplete Reference
- LO1359
- 16236 - Dla Land And Maritime (Active)
- Secondary Buy
- Secondary Buy
- LL-HK6-2219
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5330-01-301-5998
- Characteristic
- Specifications
- FIIG
- Specifications
- A032A0
- Aperture Length [ADUF]
- 6.880 Inches Nominal
- Aperture Width [ADUE]
- 3.720 Inches Minimum And 3.780 Inches Maximum
- Bolt Hole Quantity [AECS]
- 12
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.562 Inches Nominal All Holes
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.850 Inches Nominal All Holes
- Criticality Code Justification [CRTL]
- Zzzy
- Cross-Sectional Shape Style [AAGR]
- Solid Single Or Composition
- Cross-Sectional Thickness [ADVM]
- 0.016 Inches Nominal
- Hardness Rating [CQFM]
- 60.0 Shore Durometer A Nominal Overall
- Hole Diameter [AAUB]
- 0.200 Inches Nominal All Holes
- Material Document And Classification [MDCL]
- Zz-R-765,Cl 2 Fed Spec Single Material Response Overall
- Material [MATT]
- Rubber Silicone Class Q Overall
- Outside Corner Radius [ADPW]
- 0.850 Inches Minimum And 0.910 Inches Maximum
- Inside Corner Radius [ADPQ]
- 0.350 Inches Minimum And 0.410 Inches Maximum
- Reference Number Differentiating Characteristics [ZZZY]
- A Reference Number Differentiating Material Will Be In Accordance With Naval Inventory Control Point Activity Hx Quality Control. Manufacturing And Testing Specifications Available At The Dla Icp.
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.250 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.250 Inches Nominal
- Overall Length [ABHP]
- 7.880 Inches Nominal
- Overall Width [ABMK]
- 4.720 Inches Minimum And 4.780 Inches Maximum
- Special Features [FEAT]
- Item Must Comply With Requirements Of Defense Supply Center Columbus Production Standard No. Lo1359.
- Special Test Features [SPCL]
- Special Quality Control Testing
- Style Designator [STYL]
- Non-Circular
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5330-01-301-5998
Management Data 5330-01-301-5998
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5330-01-301-5998
Freight Information 5330-01-301-5998
5330-01-301-5998 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194050. A Sub NMFC of X. It has a NMFC Description of GASKETS/RINGS PLUMBING FIXTURES. 5330-01-301-5998 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 78100 which rates the freight between FCL and LCL. 5330-01-301-5998 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5330-01-301-5998 is not classified as a special type of cargo when transported by water. 5330-01-301-5998 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5330-01-301-5998
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Special requirement – See specific instructions or drawings provided
- Type I, shelf life
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5330-01-301-5998 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: