Premium Information is available for this item - Upgrade for $1 a day
5330-01-163-2002
Nonmetallic Strip Seal
5330011632002 011632002 113700-5
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED. View more Nonmetallic Strip Seal
May 2023
3
Marketplace 5330-01-163-2002
Request a Quotation from participating marketplace vendors
Related Documents 5330-01-163-2002 1+ Documents (More...)
RQST NE Updated Every Day 5330-01-163-2002 RQST Updated Every Day 5330-01-163-2002 RQST NE Related
Documents 5330-01-163-2002 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330
Restrictions 5330-01-163-2002
5330-01-163-2002 is a Nonmetallic Strip Seal that has critical features such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5330-01-163-2002
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5330-01-163-2002
- US Navy (N1HE)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 5330-01-163-2002
- Part Number
- Manufacturer
- Status
- 113700-5
- Manufacturer
- 94271 - Lockheed Martin Corp (Active)
- Incomplete Reference
- Incomplete Reference
Datasheet 5330-01-163-2002
- Characteristic
- Specifications
- FIIG
- Specifications
- A032A0
- End Cut Angle [CTTK]
- 45.0 Degrees
- Construction [CQCF]
- Solid
- Criticality Code Justification [CRTL]
- Zzzy
- Cross-Sectional Height [ADVN]
- 0.500 Inches Nominal
- Cross-Sectional Width [ADWH]
- 0.375 Inches Nominal
- Fabrication Method [AARN]
- Cellular, Unexploded
- Reference Number Differentiating Characteristics [ZZZY]
- As Differentiated By Material Which Must Conform To Ships Parts Control Center Special Quality Control Provisions And Certified Free From Mercury Contamination
- Smooth Finish Surface Location [ADYV]
- External
- Overall Length [ABHP]
- 4.562 Inches Minimum And 4.593 Inches Maximum
- Special Test Features [SPCL]
- Special Quality Control Testing
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Management Data 5330-01-163-2002
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- X3
- Nuclear Reactor Plant (NRP) material under the technical cognizance of the NAVSEA 08 special designed, manufactured and/or treated for use in a NRP or controls thereof. This category includes all other NRP items which are not coded X2 or X4.
- Issue, Repair, Requisition Restriction Code:
- BL
- Submit/refer requisitions to NAVICP MECH. Centralized control for issue of repair parts for specific programs/equipment
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5330-01-163-2002
Freight Information 5330-01-163-2002
5330-01-163-2002 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5330-01-163-2002 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5330-01-163-2002 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5330-01-163-2002 is not classified as a special type of cargo when transported by water. 5330-01-163-2002 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5330-01-163-2002
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Heated General Purpose – Heated 40 F and above
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.0" H x 8.0" W x 2.0" L
- --
- --
- --
- Any Suitable Process
- 8.0" H x 8.0" W x 2.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- A-A-1898, Grade II, Water Resistant Cellulosic Cushioning
- Special Requirements. See Specific Instructions or Drawings Provided
- MIL-DTL-117, Bag
- Type I, shelf life
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box