Premium Information is available for this item - Upgrade for $1 a day
5330-01-058-5418
Packing Retainer
5330010585418 010585418 203444
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE. View more Packing Retainer
May 2023
2
Marketplace 5330-01-058-5418
Request a Quotation from participating marketplace vendors
Related Documents 5330-01-058-5418 5+ Documents (More...)
Day 5330-01-058-5418 RQST NE Related Documents 5330-01-058-5418 5+ Documents ( More... ) https//www.nsnlookup.com
/fsg-53/fsc-5330/us 5330-01-058-5418 Packing Retainer 5330010585418010585418 203444 An item designed
from Turkey (TR) 3 2 Jul 2001 9320-27-055-4233 https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-058-5418
Packing Retainer 5330010585418 010585418 for $1 a day Upgrade your Account Upgrade 5330-01-058-
enable JavaScript in your web browser . 9320-27-055-4233Solid Rubber Sheet9320270554233 270554233 203444
for $1 a day Upgrade your Account Upgrade 5330-01-058-5418Packing Retainer5330010585418 010585418 203444
enable JavaScript in your web browser . 9320-27-055-4233Solid Rubber Sheet9320270554233 270554233 203444
Packing Retainer 5330010585418 010585418 for $1 a day Upgrade your Account Upgrade 5330-01-058-
Upgrade your Account Upgrade 6105-00-593-3817Direct Current Motor6105005933817 005933817C3A541-1 203444
Packing Retainer 5330010585418 010585418 Sheet 9320270554233270554233 enable JavaScript https//
Restrictions 5330-01-058-5418
5330-01-058-5418 is a Packing Retainer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5330-01-058-5418
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5330-01-058-5418
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5330-01-058-5418
- Part Number
- Manufacturer
- Status
- 203444
- Manufacturer
- 86090 - Eaton Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5330-01-058-5418
- Characteristic
- Specifications
- FIIG
- Specifications
- A032A0
- Center Hole Diameter [ADYT]
- 1.554 Inches Minimum And 1.559 Inches Maximum
- Cross-Sectional Shape Style [AAGR]
- Flange
- Cross-Sectional Thickness [ADVM]
- 0.009 Inches Minimum And 0.011 Inches Maximum
- Cross-Sectional Height [ADVN]
- 0.250 Inches Nominal
- Material [MATT]
- Plastic Polytetrafluoroethylene Overall
- Material Document And Classification [MDCL]
- Ams 3651 Assn Std Single Material Response Overall
- Rim Surface Width [ADVX]
- 0.040 Inches Minimum And 0.050 Inches Maximum
- Special Features [FEAT]
- 30 Deg. By 0.030 In. Deep Relief On Flange Side Of Id
- Peripheral Diameter [ADYU]
- 1.726 Inches Minimum And 1.741 Inches Maximum
DLA Procurement Analysis 5330-01-058-5418
Management Data 5330-01-058-5418
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5330-01-058-5418
Freight Information 5330-01-058-5418
5330-01-058-5418 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5330-01-058-5418 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5330-01-058-5418 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5330-01-058-5418 is not classified as a special type of cargo when transported by water. 5330-01-058-5418 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5330-01-058-5418 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: