5330-01-019-8252

Jul 1976 4130-01-425-8476 Refrigerating Condensing Unit AEA2413ZXAXB 9 | DAC: 5 25 Mar 1974 5330-01-019-8252

6240-12-172-8193 6240121728193 121728193 is an item whose principal purpose is to produce light from a glowing filament(s). it includes metal backed and reflecting types, seal beam and flood types. it may include an integral filament shield to control and/or modify its illumination pattern.

5970-00-394-1290 5970003941290 003941290 is a rigid or flexible tubing having other than uniform fabricated shapes or forms. it is specifically designed to prevent any undesirable flow of current between conductors or between conductors and other objects. includes shrinkable type items. excludes items not having rated electrical characteristics. also excludes bushing, sleeve; cable nipple, electrical; and insulation sleeving, electrical.

5905-15-128-4686 5905151284686 151284686 RESISTENZA

5365-99-781-0616 5365997810616 997810616 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.