5330-00-773-1055

for $1 a day Upgrade your Account Upgrade 5330-00-595-6319Gasket5330005956319 005956319 B017440-2 A17432
A17432 GASKET 3 EA NS Request Quotation B017440-2 GASKET 290 EA NS Request Quotation FedMall Updated
RNCC 3 RNVC 2 DAC 5 B017440-2 3K0A8 - Mov Controls Lp (Active) Secondary Buy RNCC 5 RNVC 2 DAC 5 A17432

: 2 | DAC: 5 1 Jul 1984 5320-21-893-8923 Rivet BRG50078RNCC: 3 | RNVC: 2 | DAC: 6 3 Dec 1983 5330-00-773-1055

5306-00-180-0452 5306001800452 001800452 is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

5306-00-151-0322 5306001510322 001510322 is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

browser . 2540-14-317-1623Rearview Mirror Arm2540143171623 143171623 CU035006 9057D 9057DGRIS 814918 A17432
DAC 1 814918 F0774 - Caterpillar Materiels Routiers (Cancelled) Secondary Buy RNCC 5 RNVC 2 DAC 4 A17432