5330-00-205-3944

5310-00-990-5514 5310009905514 009905514 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

| DAC: 5 1 Jan 1963 3040-00-270-8366 Ball Joint 9900550RNCC: 3 | RNVC: 2 | DAC: 2 1 Jan 1963 5330-00-205-3944

4130-34-029-4174 4130340294174 340294174 is a direct expansion refrigerating cooling element where the liquid refrigerant boils or evaporates and absorbs heat.