Premium Information is available for this item - Upgrade for $1 a day
5330-00-171-4456
Gasket
5330001714456 001714456 175739
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR. View more Gasket
May 2023
7
Marketplace 5330-00-171-4456
Request a Quotation from participating marketplace vendors
Related Documents 5330-00-171-4456 5+ Documents (More...)
-171-4456 RQST Updated Every Day 5330-00-171-4456 RQST NE Related Documents 5330-00-171-4456 5+ Documents
( More... ) https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-00-171-4456 Gasket 5330001714456 001714456,175739
Day 5815-01-262-1962 RQST NE Related Documents https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-00-171-4456
Gasket 5330001714456 001714456,175739 Active) Primary Buy RNCC 3 RNVC 2 DAC 2 737-175739 https/
www.nsnlookup.com /fsg-43/fsc-4310/uk 4310-99-536-8771 Compressor Piston 4310995368771995368771 D60657737-175739
Gasket 5330001714456 001714456,175739 Restrictions Approved Sources Datasheet Management https/
1965 Facsimile Subassembly 5815012621965 012621965 and Facsimile Equipment from United States (US) 175739
Teletype and Facsimile Equipment from United States (US) 29 Aug 1987 5815-01-262-1962 Toner Arm Housing 175739
https//www.nsnlookup.com /fsg-58/fsc-5815 Teletype and Facsimile Equipment from United States (US) 175739
Restrictions 5330-00-171-4456
5330-00-171-4456 is a Gasket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5330-00-171-4456
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HDKE
Approved Sources 5330-00-171-4456
- Part Number
- Manufacturer
- Status
- 175739
- Manufacturer
- 2A659 - Airmotive Carburetor (Active)
- Primary Buy
- Primary Buy
- 175739
- 06848 - Honeywell International Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5330-00-171-4456
- Characteristic
- Specifications
- FIIG
- Specifications
- A032A0
- Aperture Diameter [ABVL]
- 0.625 Inches Minimum And 0.656 Inches Maximum
- Bolt Hole Quantity [AECS]
- 4
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 0.659 Inches Minimum And 0.669 Inches Maximum
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 0.659 Inches Minimum And 0.669 Inches Maximum
- Cross-Sectional Shape Style [AAGR]
- Solid Single Or Composition
- Cross-Sectional Thickness [ADVM]
- 0.027 Inches Minimum And 0.037 Inches Maximum
- Hole Diameter [AAUB]
- 0.120 Inches Minimum And 0.125 Inches Maximum
- Material [MATT]
- Rubber Synthetic Overall
- Outside Corner Radius [ADPW]
- 0.141 Inches Nominal
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.108 Inches Minimum And 0.113 Inches Maximum
- Outside Edge To Bolt Hole Center Distance Along Width [ADVD]
- 0.108 Inches Minimum And 0.113 Inches Maximum
- Overall Length [ABHP]
- 0.875 Inches Minimum And 0.906 Inches Maximum
- Overall Width [ABMK]
- 0.875 Inches Minimum And 0.906 Inches Maximum
- Style Designator [STYL]
- Non-Circular
DLA Procurement Analysis 5330-00-171-4456
Management Data 5330-00-171-4456
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5330-00-171-4456
Freight Information 5330-00-171-4456
5330-00-171-4456 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5330-00-171-4456 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5330-00-171-4456 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5330-00-171-4456 is not classified as a special type of cargo when transported by water. 5330-00-171-4456 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5330-00-171-4456 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: