5330-14-238-3454

5330-14-278-1299 5330-37-501-2852 5330-14-254-8483 https//www.nsnlookup.com /fsg-53/fsc-5330/fr 5330-14-238-3454
Nonmetallic Channel Seal 5330142383454 RNVC 9 DAC 6 NATO Stock Numbers Related to 5330-14-238-3454

Jan 1967 5330-14-228-7865 Preformed Mechanical Felt 18609RNCC: 5 | RNVC: 9 | DAC: 6 1 Jan 1966 5330-14-238-3454

Address:Dummy Address To Force Update B PO Box 180307 TallahasseeFL32308-3751 United States Points of
physical entity known as Southland Contracting Inc located at Dummy Address To Force Update, B, PO Box 180307
0R1P0 refers to Southland Contracting Inc located at Dummy Address To Force Update, B, PO Box 180307,

your web browser . 4620-14-578-2534Osmosis Desalination Distillation Unit4620145782534 145782534 180307
/cage Southland Contracting Inc (CAGE Code 0R1P0) Address:Dummy Address To Force Update B PO Box 180307
physical entity known as Southland Contracting Inc located at Dummy Address To Force Update, B, PO Box 180307

5365-99-864-6255 5365998646255 998646255 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.