5330-33-157-7065

www.nsnlookup.com /fsg-53/fsc-5330 Packing and Gasket Materials from Spain (ES) 1 3 Oct 1997 5330-33-157-7065

: 1 12 Jun 1990 5330-33-106-3476 Preformed Packing 4008RNCC: 3 | RNVC: 2 | DAC: 1 3 Oct 1997 5330-33-157-7065

5310-99-651-1254 5310996511254 996511254 is a washer, round in shape, and having a centrally located hole. one bearing surface is flat and unbroken, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. the thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. for items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing sleeve; or spacer, sleeve. excludes insulator, washer and thrust type washers.

6105-99-715-3830 6105997153830 997153830 is a motor which is designed for operation from an alternating current source. see also motor, control.

3120-99-814-8222 3120998148222 998148222 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.