5330-22-612-5426

Page 1 of 1 5340-22-617-3849 Mounting Bracket 0275650000RNCC: 3 | RNVC: 2 | DAC: 4 16 Jun 2008 5330-22-612-5426

5330-14-577-0067 Door Seal Replacement Parts Kit 05055101RNCC: 3 | RNVC: 2 | DAC: 4 29 Jul 2013 5330-22-612-5426

5310-14-302-4414 5310143024414 143024414 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3040-01-247-9837 3040012479837 012479837 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).