Packing and Gasket Materials - Germany (DE)

Federal Supply Class (FSC): 5330

NATO Supply Classification Class (NSC): 5330

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 105 of 105

NSN Format for Packing and Gasket Materials
Codified by Germany

533012XXXXXXX
Group
FSG		ClassNCBIdentifier
FSC
Federal Supply Class		NIIN
NSN

NATO Supply Class 5330 is a classification within NATO Supply Group 53, which is dedicated to Hardware And Abrasives.

NATO Supply Class 5330 specifically focuses on Packing And Gasket Materials. These materials are used for sealing and protecting various components and systems in military equipment and machinery.

Packing materials refer to items such as seals, gaskets, O-rings, and other similar products that are used to prevent leakage or contamination in mechanical systems. Gasket materials, on the other hand, are specifically designed to create a tight seal between two surfaces, preventing the escape of fluids or gases.

In the context of NATO, these packing and gasket materials are essential for maintaining the operational readiness and reliability of military equipment. They are used in a wide range of applications, including vehicles, aircraft, ships, and other military hardware.

The classification of Packing And Gasket Materials in NATO Supply Class 5330 ensures that these materials are properly categorized and standardized for procurement and supply chain management purposes within NATO member countries. This classification helps to streamline the process of acquiring and distributing these materials, ensuring that they meet the necessary quality and performance standards required by the military.

Overall, NATO Supply Class 5330 plays a crucial role in ensuring the availability and reliability of packing and gasket materials for military applications, contributing to the overall effectiveness and readiness of NATO forces.

FSC 5330 Packing and Gasket Materials - Germany (DE)
FSC 5330 Packing and Gasket Materials - Germany (DE)

Includes General Purpose Oil Grease, Air, Liquid, Gas, and chemical Seals; Oakum; Prefabricated Gaskets and Seals designed for a single specific application.

Excludes O-Rings (FSC 5331); Bulk material items, such as; Rubber, Cork, and Asbestos Sheets and Strips (FSG 93); Liquid Gasket Materials (RTV, Permatex, etc.) (FSG 80); RFI and EMI Seals and Gaskets (FSC 5999), and all Seal Retainers.

Frequently Asked Questions(FAQ) for Federal Supply Class 5330 Frequently Asked Questions(FAQ) for Federal Supply Class 5330

What is Federal Supply Class 5330?
FSC 5330 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5330) in the USA for supply items codified in the category of Packing and Gasket Materials.
What is NATO Supply Classification Class 5330?
NSC 5330 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5330 in the USA) for supply items codified in the category of Packing and Gasket Materials.
Which Federal Supply Group is FSC 5330 in?
FSC 5330 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5330 in?
NSC 5330 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5330 Supply Items Included in Federal Supply Class 5330

What is a Caulking Cotton? 32 Items
A Caulking Cotton is excludes PACKING MATERIAL.
What is a Plain Encased Seal? 2241 Items
A Plain Encased Seal (SEAL,PLAIN ENCASED) is a pliable rubber, felt, leather, or composition ring-shaped element, split or solid; with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER.
What is a Plain Seal? 3276 Items
A Plain Seal (SEAL,PLAIN) is a pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. It is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal.
What is a Preformed Packing? 4015 Items
A Preformed Packing (PACKING,PREFORMED) is a circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. It may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section); or (2) any shredded metal or metal foil type metallic or semimetallic rings. Excludes felt items but includes multimaterial items in which one of the materials is felt. For solid (without joints) nonmetallic items with a square or rectangular cross section, see WASHER (as modified) and GASKET. For rubber items specifically designed for weather-proofing doors, windows, chests, and the like see SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; and SEAL, NONMETALLIC, SPECIAL SHAPED SECTION. For circular (with aperature) nonmetallic items with a solid round cross-section see O-RING. Excludes CUP, COMPRESSION; GASKET; WASHER (as modified); and FELT, MECHANICAL, PREFORMED.
What is a Gasket? 23578 Items
A Gasket is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
What is a Packing Material? 192 Items
A Packing Material is any material specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals or liquids and used to create a tight seal. It is supplied in loose form or in coils, spirals, spools or cut lengths, usually having a square or round cross section. For rubber items having a round cross section, see RUBBER ROUND SECTION. Excludes ROPE, ASBESTOS; CALKING COTTON; and CALKING LEAD. See also PACKING, PREFORMED; and OAKUM.
What is a Packing With Retainer? 54 Items
A Packing With Retainer is an item composed of a compressible nonmetallic ring which may be loosely fitted into a noncompressible retaining ring, or may be of one piece construction with the compressible ring molded and/or mechanically connected to the retainer. It is specifically designed to form a fluid tight seal when compressed by a packing nut, gland, and the like, between fixed surfaces and a cylindrical item passing through it. Excludes SEAL,PLAIN,ENCASED.
What is an Asbestos Rope? 42 Items
An Asbestos Rope (ROPE,ASBESTOS) is an assemblage primarily of asbestos fibers of round, square, or rectangular cross section and of twisted or braided construction, used primarily for packing or insulation. Excludes PACKING MATERIAL.
What is a Packing Assembly? 1039 Items
A Packing Assembly is any combination of items manufactured from PACKING MATERIAL to predetermined dimensions, or any combination of nonmetallic molded or formed shapes (other than solid rubber or synthetic rubber rings having a square or rectangular cross section) specifically designed and manufactured for use as a seal. The assembly may include metal lantern rings, metal separators, and/or end or adapter rings.
What is a Compressed Asbestos Sheet? 32 Items
A Compressed Asbestos Sheet (ASBESTOS SHEET,COMPRESSED) is a compressed sheet consisting of asbestos fiber uniformly mixed with a binder. It may be flat or in roll form. It is usually pliable and normally used as a gasket material. Sheets are limited to widths greater than 6 inches (152.4 mm). Excludes INSULATION BLANKET, THERMAL; INSULATION BLOCK, THERMAL; INSULATION BOARD, THERMAL; PAPER, ASBESTOS; and items designed for clutch and/or brake applications.
What is a Gasket Paper? 18 Items
A Gasket Paper (PAPER,GASKET) is an item consisting of a plant or animal fiber and binding compound, rolled or compressed into sheets or rolls, specifically designed and treated for use as a gasket material. See also PAPER (as modified).
What is a Packing Retainer? 894 Items
A Packing Retainer (RETAINER,PACKING) is an item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.
What is a Preformed Mechanical Felt? 364 Items
A Preformed Mechanical Felt (FELT,MECHANICAL,PREFORMED) is an item manufactured to predetermined dimensions. It is either a precut strip or an item of various peripheral shapes and may contain bolt hole(s). It is used as a seal, wiper, mounting pad or for similar purposes. Excludes GASKET and PACKING PREFORMED.
What is a Metal Seam Sealing Cloth Tape? 11 Items
A Metal Seam Sealing Cloth Tape (TAPE,CLOTH,METAL SEAM SEALING) is a narrow strip of cloth impregnated with an adhesive sealing compound used particularly for sealing against pressure, such as pressurized cabins, riveted fuel tanks or other liquid containers. It is suitable not only as a sealer but also as a dissimilar metal insulator for the prevention of electrolysis causing galvanic corrosion. The adhesive compound may be covered with cloth or fabric, such as buckram interleaf, to prevent sticking in the roll and is discarded in use. Excludes TAPE, INSULATION, ELECTRICAL; TAPE, JOINT, WALLBOARD; TAPE, GUMMED; TAPE, ADHESIVE, RUBBER; and STRIP, COATED CLOTH.
What is a Wiper Ring? 624 Items
A Wiper Ring (RING,WIPER) is a circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. It is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. Excludes PACKING, PREFORMED; RING, PISTON; and SEAL RING, METAL.
What is a Nonmetallic Seal Cap? 18 Items
A Nonmetallic Seal Cap (CAP,SEAL,NONMETALLIC) is a molded cup-shaped item having a small aperture in its apex. the aperture is designed for releasing the excess sealing cement applied in the cap prior to use. The item is designed to create a tight seal around bolt heads, nuts and rivets where a tight and effective seal is required, such as airplane integral fuel tanks. Also used for antichafing protection. Excludes BOOT, DUST AND MOISTURE SEAL and CAP, PPROTECTIVE, DUST AND MOISTURE SEAL.
What is a Coupler Seal Sleeve? 18 Items
A Coupler Seal Sleeve (SLEEVE,SEAL,COUPLER) is a cylindrical shaped item constructed of pliable nonmetallic solid or laminated materials. It is designed to fit around flanged or beaded end tubing, ducts, piping, and the like, to form a tight and effective seal against gases and liquids; when compressed with a clamp. For items used to convey air under low pressure, see HOSE, AIR DUCT. Excludes PACKING, PREFORMED; TUBING, NONMETALLIC; and BUSHING, RUBBER.
What is a Gasket And Preformed Packing Assortment? 27 Items
A Gasket And Preformed Packing Assortment is two or more different sizes and/or types of gaskets and preformed packing, grouped together in a single package and intended for individual repeated replacement and/or general use. For items intended for one time replacement in the repair of pumps, valves, engines, compressors, and the like, see GASKET AND PREFORMED PACKING SET; for items containing gaskets, preformed packing, and additional items such as washers and seals, see PARTS KIT (as modified).
What is a Gasket And Preformed Packing Set? 494 Items
A Gasket And Preformed Packing Set is two or more different sizes and/or types of gaskets and preformed packing, grouped together in a single package and intended for one item replacement in the repair of pumps, valves, engines, compressors and the like. FOR ITEMS INTENDED FOR INDIVIDUAL REPEATED REPLACEMENT AND/OR GENERAL USE, SEE GASKET AND PREFORMED PACKING ASSORTMENT; for items containing gaskets, preformed packing, and additional items such as washers and seals, see PARTS KIT (as modified). See also GASKET; and GASKET SET. Excludes GASKET ASSORTMENT; and PACKING ASSORTMENT, PREFORMED.
What is a Gasket And Shim Set? 48 Items
A Gasket And Shim Set is two or more different sizes and/or types of gaskets and shims, grouped together in a single package and intended for one-time replacement in repair of transmission, differentials, gear boxes, and the like. See also GASKET; SHIM and GASKET SET.
What is a Gasket Assortment? 19 Items
A Gasket Assortment is two or more sizes and/or types of gaskets grouped together in a single package and intended for individual repeated replacement and/or general use. See also GASKET SET.
What is a Gasket Set? 686 Items
A Gasket Set is two or more sizes and/or types of gaskets packaged or grouped for issue as a unit for complete replacement. See also GASKET ASSORTMENT.
What is a Rubber Round Section? 139 Items
A Rubber Round Section is an item of natural and/or synthetic rubber of solid or cellular structure having a circular cross section. Items of cellular structure may be tubular or nontubular. It may have a wire or cord insert. For flexible tubular items of solid rubber structure, see TUBING NONMETALLIC. Excludes HOSE, NONMETALLIC and electric current carrying items.
What is a Metal Seal Ring? 193 Items
A Metal Seal Ring (SEAL RING,METAL) is a circular shaped item designed to be installed in a specially prepared groove or counterbore to provide a low pressure seal. It may be supplied in various cross-sectional shapes and is cut through at one point to allow for installation and fitting. Excludes items whose primary function is to provide sealing, wiping, or wearing surface capabilities for piston configurations. See also RING, PISTON and RING, WIPER.
What is a Rubber Strip? 331 Items
A Rubber Strip is an elastic material of compact (solid) or cellular structure having smooth, crepe or porous surface(s) and having an oval, parallelogram, square, rectangular or D-shaped cross section. It is produced in various thicknesses. Strips are limited to widths of 6 inches (152.4mm) or less. It may or may not have a nonrubber backing or a wire cloth or cord insert. For items having a round cross section, see RUBBER ROUND SECTION. Excludes RUBBER SHEET, INNER TUBE REPAIR. See also NONMETALLIC ANGLE; NONMETALLIC CHANNEL; NONMETALLIC SPECIAL SHAPED SECTION.
What is a Gasket And Seal Set? 282 Items
A Gasket And Seal Set is two or more different sizes and/or types of gaskets and seals, grouped together in a single package intended for one-time replacement in repair of engines, transmissions, differentials, gear boxes, and the like. See also GASKET; SEAL, PLAIN; SEAL, PLAIN ENCASED; and GASKET SET.
What is a Preformed Packing Assortment? 68 Items
A Preformed Packing Assortment (PACKING ASSORTMENT,PREFORMED) is two or more different sizes and/or types of preformed packing grouped together in a single package and intended for individual repeated replacement and/or general use. Excludes PACKING ASSEMBLY.
What is a Nonmetallic Angle Seal? 42 Items
A Nonmetallic Angle Seal (SEAL,NONMETALLIC ANGLE) is an item fabricated from NONMETALLIC ANGLE. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items except for molded corners, end cut(s), and mounting hole(s), slot(s), press fit buttons and the like, must be of one continuous cross section. It may have fabric, cord, or metal reinforcement. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC; GASKET; and PACKING PREFORMED. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC ANGLE.
What is a Nonmetallic Channel Seal? 96 Items
A Nonmetallic Channel Seal (SEAL,NONMETALLIC CHANNEL) is an item fabricated from NONMETALLIC CHANNEL. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items except for molded corners, end cut(s), and mounting facilities, such as mounting hole(s), slot(s), press fit buttons, and the like, must be one continuous cross section. It may have fabric, cord, or metal reinforcement. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes GASKET; GROMMET, NONMETALLIC; and PACKING, PREFORMED. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC CHANNEL.
What is a Nonmetallic Special Shaped Section Seal? 2179 Items
A Nonmetallic Special Shaped Section Seal (SEAL,NONMETALLIC SPECIAL SHAPED SECTION) is an item fabricated from NONMETALLIC SPECIAL SHAPED SECTION. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC; PACKING, PERFORMED; PAD, CUSHIONING;and SEAL, PLAIN. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC SPECIAL SHAPED SECTION.
What is a Mechanical Equipment Seal Replacement Parts Kit? 69 Items
A Mechanical Equipment Seal Replacement Parts Kit (PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT) is a parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY.
What is a Nonmetallic Round Section Seal? 598 Items
A Nonmetallic Round Section Seal (SEAL,NONMETALLIC ROUND SECTION) is an item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items with a solid cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to specific shape with or without joints. It may be a straight item of a specific length with end cuts or joints. It may have a solid or tubular cross section. Except for molded corners, end cuts, and mounting facilities such as mounting holes, slots, press-fit buttons, or the like, the item must be of one continuous round cross section. It may have fabric, cord or metal reinforcement. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER ROUND SECTION and TUBING, NONMETALLIC. Excludes GASKET and PACKING, PREFORMED.
What is a Nonmetallic Strip Seal? 447 Items
A Nonmetallic Strip Seal (SEAL,NONMETALLIC STRIP) is an item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED.
What is a Seal Retainer Sleeve? 10 Items
A Seal Retainer Sleeve (RETAINER SLEEVE,SEAL) is a rigid cylindrical item with external grooves to provide proper spacing for seals and/or rings as modified. Must have a bore for a shaft or the like. Excludes RETAINER, OIL SEAL and RETAINER, PACKING.
Ring,Oil Control 17 Items
What is a Brush Type Seal? 38 Items
A Brush Type Seal (SEAL,BRUSH TYPE) is an item designed for sealing openings. It is fitted with natural or synthetic bristles preventing dust or dirt penetration and contributing to air draft reduction.
What is a Seal Retainer? 102 Items
A Seal Retainer (RETAINER,SEAL) is an item of various shapes and cross sections, usually flanged and designed to fit over a rod, shaft, or the like, for the purpose of encasing and posititioning a SEAL, PLAIN ENCASED or a SEAL, PLAIN. The flange is usually drilled for stud or bolt mounting. Item does not include the seal. Excludes RETAINER, PACKING.
What is a Preformed Packing Back-Up Ring? 12 Items
A Preformed Packing Back-Up Ring (BACK-UP RING,PREFORMED PACKING) is a circular shaped item with an aperture manufactured to predetermined dimensions, constructed with a rectangular cross section that may be solid, with joint, or in a helical form that facilitates spiral wrap installation. It prevents seal extrusion under pressure and is designed to fit on the down-pressure side of a gland groove with a PACKING, PREFORMED or O-RING.

Stock Items From Supply Class 5330 Stock Items From Supply Class 5330 Page 105 of 105

NSN 5330-12-305-4210 123054210 GASKET
5330-12-305-4210
Gasket
123054210
U13,7X20X1,5-72NBR/99041
RNCC: 3 | RNVC: 2
SP01675
RNCC: 5 | RNVC: 2
K.25.048.4.006.01
RNCC: 5 | RNVC: 2
00.3.357.0026
RNCC: 5 | RNVC: 9
U13,7X20X1,5-72NBR/902
RNCC: 5 | RNVC: 9
RKE454-13
RNCC: 5 | RNVC: 9
4 Nov 1985
NSN 5330-12-310-3656 123103656 GASKET
5330-12-310-3656
Gasket
123103656
50-89219-00
RNCC: 3 | RNVC: 2
06562522005
RNCC: 3 | RNVC: 2
06.56252-2005
RNCC: 5 | RNVC: 2
06.56252.2005
RNCC: 5 | RNVC: 2
14 May 1987
NSN 5330-12-130-9480 121309480 GASKET
5330-12-130-9480
Gasket
121309480
DIN7603-A50X57-CU
RNCC: 2 | RNVC: 2
01118849
RNCC: 5 | RNVC: 2
2162127
RNCC: 5 | RNVC: 2
0634 801 267
RNCC: 5 | RNVC: 2
005030
RNCC: 5 | RNVC: 2
6.0492.01.0.5057
RNCC: 5 | RNVC: 9
0634801267
RNCC: 5 | RNVC: 9
A50X57DIN7603-CU
RNCC: 5 | RNVC: 9
A50X57DIN7603CU
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-190-0367 121900367 SEAL,PLAIN ENCASED
5330-12-190-0367
Plain Encased Seal
121900367
B2-40X55X7-72NBR/902
RNCC: 3 | RNVC: 2
B2-40X55X7-72NBR902
RNCC: 5 | RNVC: 2
4 Nov 1981
NSN 5330-12-195-1567 121951567 SEAL,PLAIN
5330-12-195-1567
Plain Seal
121951567
BAU3-30X47X7-78VMQ/541
RNCC: 3 | RNVC: 2
70658300
RNCC: 5 | RNVC: 2
5000242969
RNCC: 5 | RNVC: 2
5000242969
RNCC: 5 | RNVC: 9
18 Jan 1983
NSN 5330-12-190-2044 121902044 SEAL,PLAIN
5330-12-190-2044
Plain Seal
121902044
BAU3SL20X30X7-72NBR/902
RNCC: 3 | RNVC: 2
BAU3SL20X30X7-72NBR902
RNCC: 5 | RNVC: 2
0049977146
RNCC: 5 | RNVC: 2
0049977146
RNCC: 5 | RNVC: 2
BAU3SL20X30X7-72NBR902
RNCC: 5 | RNVC: 2
8972006504
RNCC: 5 | RNVC: 2
8972006504
RNCC: 5 | RNVC: 2
11 Nov 1981
NSN 5330-12-344-0649 123440649 GASKET
5330-12-344-0649
Gasket
123440649
ED88-0274-00001-120
RNCC: 3 | RNVC: 2
5 Sep 1997
NSN 5330-12-309-9651 123099651 SEAL,NONMETALLIC STRIP
5330-12-309-9651
Nonmetallic Strip Seal
123099651
C42165-A152-C142
RNCC: 3 | RNVC: 2
24 Mar 1987
NSN 5330-12-142-6718 121426718 GASKET
5330-12-142-6718
Gasket
121426718
KN12-3-8X14X1
RNCC: 3 | RNVC: 2
513322000
RNCC: 5 | RNVC: 9
513322000
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-151-1195 121511195 GASKET
5330-12-151-1195
Gasket
121511195
111A27001
RNCC: 3 | RNVC: 2
28200162159
RNCC: 5 | RNVC: 9
8200162159
RNCC: 5 | RNVC: 9
111A27001/1
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-391-7999 123917999 GASKET
5330-12-391-7999
Gasket
123917999
51069030067
RNCC: 3 | RNVC: 2
51.06903-0067
RNCC: 5 | RNVC: 2
K08182
RNCC: 5 | RNVC: 9
9 Apr 2013
NSN 5330-12-327-8012 123278012 PACKING,PREFORMED
5330-12-327-8012
Preformed Packing
123278012
ID2166
RNCC: 3 | RNVC: 2
4803.40-120/440.60POS11A
RNCC: 5 | RNVC: 2
6 Mar 1992
NSN 5330-12-179-8035 121798035 PACKING,PREFORMED
5330-12-179-8035
Preformed Packing
121798035
1541-007.539
RNCC: 3 | RNVC: 2
1541-007-539
RNCC: 5 | RNVC: 2
S8-63
RNCC: 5 | RNVC: 2
07320
RNCC: 5 | RNVC: 2
L1541-007-539
RNCC: 5 | RNVC: 9
L1541-007.539
RNCC: 5 | RNVC: 9
30 Jul 1979
NSN 5330-12-334-6739 123346739 GASKET
5330-12-334-6739
Gasket
123346739
0004-2504-770
RNCC: 3 | RNVC: 2
0004-2504-770
RNCC: 5 | RNVC: 9
WSN04-0005-60-92X130X0,2
RNCC: 5 | RNVC: 9
8 Jun 1994
NSN 5330-12-369-3567 123693567 GASKET
5330-12-369-3567
Gasket
123693567
KLINGERSIL C-4430 23X25,5X1
RNCC: 3 | RNVC: 2
26 Jun 2006
NSN 5330-12-317-0389 123170389 GASKET
5330-12-317-0389
Gasket
123170389
467-420/2178-01-00-50
RNCC: 3 | RNVC: 2
2270000044
RNCC: 5 | RNVC: 2
7 Mar 1989
NSN 5330-12-168-6750 121686750 GASKET
5330-12-168-6750
Gasket
121686750
WW 105 009
RNCC: 2 | RNVC: 2
WW 105 009
RNCC: 3 | RNVC: 2
WW 105 009
RNCC: 5 | RNVC: 2
WW105009
RNCC: 5 | RNVC: 2
WW 105 009
RNCC: 5 | RNVC: 9
WW105009
RNCC: 5 | RNVC: 9
28 Mar 1977
NSN 5330-12-143-0811 121430811 SEAL,NONMETALLIC SPECIAL SHAPED SECTION
5330-12-143-0811
Nonmetallic Special Shaped Section Seal
121430811
2360-391200.03.0
RNCC: 2 | RNVC: 2
2360-391200.03.0
RNCC: 3 | RNVC: 2
2360-391200.03.0
RNCC: 5 | RNVC: 9
2360-391200-03-0
RNCC: 5 | RNVC: 9
2360-391200-03-0
RNCC: 5 | RNVC: 9
2360-391200.03.0
RNCC: 5 | RNVC: 9
2360-391200-03-0
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-343-8470 123438470 GASKET
5330-12-343-8470
Gasket
123438470
731739-002
RNCC: 3 | RNVC: 9
1725790
RNCC: 5 | RNVC: 2
GDM3-21
RNCC: 5 | RNVC: 9
5 Aug 1997
NSN 5330-12-187-2949 121872949 GASKET SET
5330-12-187-2949
Gasket Set
121872949
1457010003
RNCC: 3 | RNVC: 2
7-541-0490
RNCC: 5 | RNVC: 2
1058928
RNCC: 5 | RNVC: 2
26 Mar 1981
NSN 5330-12-158-5222 121585222 SEAL,PLAIN ENCASED
5330-12-158-5222
Plain Encased Seal
121585222
B2-130X155X10-72NBR/902
RNCC: 3 | RNVC: 2
B2-130X155X10-72NBR902
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-152-6655 121526655 PACKING,PREFORMED
5330-12-152-6655
Preformed Packing
121526655
N68-100 68X92X15-90NBR/108
RNCC: 3 | RNVC: 2
N68-100
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-362-0038 123620038 GASKET
5330-12-362-0038
Gasket
123620038
11.05587-0034
RNCC: 3 | RNVC: 2
5D18879
RNCC: 5 | RNVC: 2
X11.05587-0034
RNCC: 5 | RNVC: 2
16 Dec 2003
NSN 5330-12-343-1569 123431569 DICHTUNGSKOERPER
5330-12-343-1569
Dichtungskoerper
123431569
AELD34E08
RNCC: 3 | RNVC: 2
12800/AG-34/LEG08
RNCC: 5 | RNVC: 9
12 May 1997
NSN 5330-12-329-5261 123295261 GASKET
5330-12-329-5261
Gasket
123295261
M-PKL-542731-30051-023
RNCC: 3 | RNVC: 2
M-PKL-542731-30051-023
RNCC: 5 | RNVC: 9
27 Aug 1992
NSN 5330-12-186-9724 121869724 GASKET
5330-12-186-9724
Gasket
121869724
H4-370955-1-1
RNCC: 3 | RNVC: 2
H4-370955-1-1
RNCC: 5 | RNVC: 9
H4-370955-1-1
RNCC: 5 | RNVC: 9
23 Feb 1981
NSN 5330-12-176-3567 121763567 SEAL ASSEMBLY,SHAFT,SPRING LOADED
5330-12-176-3567
Spring Loaded Shaft Seal Assembly
121763567
IDR20X38
RNCC: 3 | RNVC: 2
76-53-2600
RNCC: 5 | RNVC: 2
1215 4657
RNCC: 5 | RNVC: 2
6-0690-12-8-0402
RNCC: 5 | RNVC: 9
12154657
RNCC: 5 | RNVC: 9
6.0690.12.8.0402
RNCC: 5 | RNVC: 9
23 Nov 1978
NSN 5330-12-368-3016 123683016 PACKING,PREFORMED
5330-12-368-3016
Preformed Packing
123683016
19-3200-170-0001-0002
RNCC: 3 | RNVC: 2
63073860E
RNCC: 5 | RNVC: 2
13 Feb 2006
NSN 5330-12-354-3762 123543762 GASKET
5330-12-354-3762
Gasket
123543762
0956448
RNCC: 3 | RNVC: 2
5 Jul 2001
NSN 5330-12-312-1981 123121981 GASKET
5330-12-312-1981
Gasket
123121981
51119010012
RNCC: 3 | RNVC: 2
51119010012
RNCC: 3 | RNVC: 2
51.11901-0012
RNCC: 5 | RNVC: 2
51.11901-0012
RNCC: 5 | RNVC: 2
51119010012
RNCC: 5 | RNVC: 2
2 Dec 1987
NSN 5330-12-182-2681 121822681 GASKET
5330-12-182-2681
Gasket
121822681
556-109000-010
RNCC: 3 | RNVC: 2
21 Jan 1980
NSN 5330-12-350-1109 123501109 SEAL,PLAIN ENCASED
5330-12-350-1109
Plain Encased Seal
123501109
B1NIF95X110X9/8-72NBR/902
RNCC: 3 | RNVC: 2
0720764
RNCC: 5 | RNVC: 2
16 Feb 2000
NSN 5330-12-703-3214 127033214 SEAL,PLAIN
5330-12-703-3214
Plain Seal
127033214
VG95211-ML-127033214
RNCC: 2 | RNVC: 2
5.12.6117.8005.98
RNCC: 3 | RNVC: 2
4 Apr 2000
NSN 5330-12-181-4999 121814999 RETAINER,PACKING
5330-12-181-4999
Packing Retainer
121814999
1036218
RNCC: 3 | RNVC: 2
351-002-231150-003-0
RNCC: 5 | RNVC: 9
26 Nov 1979
NSN 5330-12-317-3956 123173956 GASKET AND PREFORMED PACKING SET
5330-12-317-3956
Gasket And Preformed Packing Set
123173956
056.151.7
RNCC: 3 | RNVC: 2
056.151.7
RNCC: 5 | RNVC: 2
FBU4712
RNCC: 5 | RNVC: 2
81.41723-6048
RNCC: 5 | RNVC: 2
81.41723-6048
RNCC: 5 | RNVC: 2
81417236048
RNCC: 5 | RNVC: 2
0005502583
RNCC: 5 | RNVC: 2
56 151.7
RNCC: 5 | RNVC: 9
56.151.7
RNCC: 5 | RNVC: 9
4 Apr 1989
NSN 5330-12-188-5159 121885159 GASKET
5330-12-188-5159
Gasket
121885159
B7-14X20X2-1.4401
RNCC: 3 | RNVC: 2
A14X20X2DIN2697-1-4401
RNCC: 5 | RNVC: 9
15 Jul 1981
NSN 5330-12-187-2984 121872984 PACKING,PREFORMED
5330-12-187-2984
Preformed Packing
121872984
036-32602
RNCC: 3 | RNVC: 2
23176-208570-12-0
RNCC: 5 | RNVC: 2
23176-208570-12-0
RNCC: 5 | RNVC: 2
23176-208570.12.0
RNCC: 5 | RNVC: 2
23176-208570-12-0
RNCC: 5 | RNVC: 9
26 Mar 1981
NSN 5330-12-126-6751 121266751 SEAL,PLAIN
5330-12-126-6751
Plain Seal
121266751
DIN3760-A10X22X7-NBR-G
RNCC: 2 | RNVC: 2
BA10X22X7-72NBR/902
RNCC: 3 | RNVC: 2
BA10X22X7-72NBR902
RNCC: 5 | RNVC: 2
A10X22DIN3760
RNCC: 5 | RNVC: 9
A10X22DIN6504
RNCC: 5 | RNVC: 9
A10X22X7DIN3760NBG
RNCC: 5 | RNVC: 9
DIN3760-A10X22X7-NB-G
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-189-1517 121891517 SEAL,PLAIN
5330-12-189-1517
Plain Seal
121891517
BAU3SLDRLX3-36,55X57,15X9/7-75F-
RNCC: 3 | RNVC: 1
BAU3SLDRLX3-36,55X57,15X9/7-83F-
RNCC: 5 | RNVC: 1
BAU3SLDRLX3-36,55X57,15X9/7
RNCC: 5 | RNVC: 2
BAU3SLDRLX3 36,55-57,15-9/7
RNCC: 5 | RNVC: 9
7 Sep 1981
NSN 5330-12-184-9396 121849396 PACKING,PREFORMED
5330-12-184-9396
Preformed Packing
121849396
V-16A
RNCC: 3 | RNVC: 2
3992-058.600
RNCC: 3 | RNVC: 2
948016
RNCC: 5 | RNVC: 2
TWVA00160-N60
RNCC: 5 | RNVC: 2
WVA-0016-N60B
RNCC: 5 | RNVC: 2
0000744559
RNCC: 5 | RNVC: 2
V16A
RNCC: 5 | RNVC: 9
VA-0016
RNCC: 5 | RNVC: 9
B3992-058.600
RNCC: 5 | RNVC: 9
V-16A
RNCC: 5 | RNVC: 9
28 Aug 1980
NSN 5330-12-362-0350 123620350 GASKET
5330-12-362-0350
Gasket
123620350
11.12087-0003
RNCC: 3 | RNVC: 2
F11.12087-0003
RNCC: 5 | RNVC: 2
18 Dec 2003
NSN 5330-12-368-0482 123680482 SEAL ASSEMBLY,SHAFT,SPRING LOADED
5330-12-368-0482
Spring Loaded Shaft Seal Assembly
123680482
TNH-65-L"C"/047
RNCC: 3 | RNVC: 2
24 Nov 2005
NSN 5330-12-313-7130 123137130 GASKET AND PREFORMED PACKING SET
5330-12-313-7130
Gasket And Preformed Packing Set
123137130
8735860001
RNCC: 1 | RNVC: 2
8735860001
RNCC: 3 | RNVC: 2
2300109-980001.001.0
RNCC: 5 | RNVC: 9
2300109-980001.001.0
RNCC: 5 | RNVC: 9
28 Apr 1988
NSN 5330-12-318-4909 123184909 GASKET
5330-12-318-4909
Gasket
123184909
1-6482-11
RNCC: 3 | RNVC: 2
1.50.6-64.82.11-01
RNCC: 5 | RNVC: 2
19 Jul 1989
NSN 5330-12-148-9579 121489579 RING,WIPER
5330-12-148-9579
Wiper Ring
121489579
2511-004.928
RNCC: 3 | RNVC: 2
23176-208590-23-0
RNCC: 5 | RNVC: 2
BC21576-14
RNCC: 5 | RNVC: 2
23176-208590-23-0
RNCC: 5 | RNVC: 9
23176-208590.23.0
RNCC: 5 | RNVC: 9
2511-004-928
RNCC: 5 | RNVC: 9
2605DP6-90
RNCC: 5 | RNVC: 9
L2511-004-928
RNCC: 5 | RNVC: 9
P6-90
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-153-1943 121531943 SEAL,PLAIN ENCASED
5330-12-153-1943
Plain Encased Seal
121531943
DFS30X42X7/01-75122
RNCC: 3 | RNVC: 2
S000822055001000
RNCC: 5 | RNVC: 2
0822055001
RNCC: 5 | RNVC: 2
DF30X42X7S2-75122
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-322-6033 123226033 SEAL,PLAIN ENCASED
5330-12-322-6033
Plain Encased Seal
123226033
B1BAFSLSFDRRX346-85X110X12-75FP-
RNCC: 3 | RNVC: 1
88/10169
RNCC: 5 | RNVC: 9
B1BAFSLSFDRRX346-85X110X12-75FK-
RNCC: 5 | RNVC: 9
5 Sep 1990
NSN 5330-12-199-8829 121998829 GASKET
5330-12-199-8829
Gasket
121998829
NO PRIMARY REF 12-199-8829
RNCC: 3 | RNVC: 2
40ND6DIN2690-ITOEG2
RNCC: 5 | RNVC: 9
DIN2690-40ND6-ITOE
RNCC: 5 | RNVC: 9
DIN2690-40ND6-ITOEG2
RNCC: 5 | RNVC: 9
13 Jun 1984
NSN 5330-12-319-6881 123196881 SEAL,PLAIN ENCASED
5330-12-319-6881
Plain Encased Seal
123196881
B2-60X90X10-72NBR/902
RNCC: 3 | RNVC: 2
25 Oct 1989
NSN 5330-12-313-7034 123137034 GASKET SET
5330-12-313-7034
Gasket Set
123137034
372800-06
RNCC: 3 | RNVC: 2
210 0113
RNCC: 5 | RNVC: 2
372800-06
RNCC: 5 | RNVC: 2
378200-06
RNCC: 5 | RNVC: 9
378200-06
RNCC: 5 | RNVC: 9
210 0113
RNCC: 5 | RNVC: 9
27 Apr 1988
NSN 5330-12-177-5880 121775880 PACKING ASSEMBLY
5330-12-177-5880
Packing Assembly
121775880
0001-070.229
RNCC: 3 | RNVC: 2
E2-80
RNCC: 5 | RNVC: 2
0001-070-229
RNCC: 5 | RNVC: 9
L0001-070-229
RNCC: 5 | RNVC: 9
L0001-070.229
RNCC: 5 | RNVC: 9
7 Feb 1979
NSN 5330-12-155-6397 121556397 GASKET
5330-12-155-6397
Gasket
121556397
160-78040-10
RNCC: 3 | RNVC: 2
160-78040-10
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-371-7911 123717911 GASKET
5330-12-371-7911
Gasket
123717911
372903-01
RNCC: 3 | RNVC: 2
16 May 2007
NSN 5330-12-175-8048 121758048 PACKING,PREFORMED
5330-12-175-8048
Preformed Packing
121758048
EE4-2062
RNCC: 3 | RNVC: 2
EE4-2062
RNCC: 5 | RNVC: 9
18 Oct 1978
NSN 5330-12-377-2961 123772961 GASKET
5330-12-377-2961
Gasket
123772961
245/2128-05-00-00
RNCC: 3 | RNVC: 2
507241
RNCC: 5 | RNVC: 9
5 Jan 2009
NSN 5330-12-390-4664 123904664 GASKET SET
5330-12-390-4664
Gasket Set
123904664
372841-03
RNCC: 3 | RNVC: 2
372 841 03
RNCC: 5 | RNVC: 2
15 Nov 2012
NSN 5330-12-171-7080 121717080 SEAL ASSEMBLY,SHAFT,SPRING LOADED
5330-12-171-7080
Spring Loaded Shaft Seal Assembly
121717080
000220202
RNCC: 3 | RNVC: 2
M32N/18-00-R-BVPGG
RNCC: 5 | RNVC: 2
M32N18-00
RNCC: 5 | RNVC: 9
DIN24960-NU018L-GBVGG
RNCC: 5 | RNVC: 9
GLRDNU018LDIN24960GBVGG
RNCC: 5 | RNVC: 9
7 Nov 1977
NSN 5330-12-380-8478 123808478 GASKET
5330-12-380-8478
Gasket
123808478
105-62305.14
RNCC: 3 | RNVC: 2
4 Dec 2009
NSN 5330-12-346-7786 123467786 GASKET
5330-12-346-7786
Gasket
123467786
78223 42203
RNCC: 2 | RNVC: 2
7822342203
RNCC: 3 | RNVC: 2
78223 42203
RNCC: 5 | RNVC: 9
10 Sep 1998
NSN 5330-12-135-5675 121355675
5330-12-135-5675
 
NSN 5330-12-129-4272 121294272
5330-12-129-4272
 
NSN 5330-12-184-8830 121848830 GASKET
5330-12-184-8830
Gasket
121848830
NO PRIMARY REF 12-184-8830
RNCC: 3 | RNVC: 2
6-11X20-5DIN46320
RNCC: 5 | RNVC: 9
DIN46320-6-11X20,4-GI
RNCC: 5 | RNVC: 9
6-11X20,5DIN46320
RNCC: 5 | RNVC: 9
DIN46320-6-11X20,5
RNCC: 5 | RNVC: 9
26 Aug 1980
NSN 5330-12-324-6336 123246336 RING,WIPER
5330-12-324-6336
Wiper Ring
123246336
2.72-31571
RNCC: 3 | RNVC: 2
2.72-31560 ITEM 1215
RNCC: 5 | RNVC: 2
8 Mar 1991
NSN 5330-12-352-7538 123527538 GASKET
5330-12-352-7538
Gasket
123527538
Z 011-K1 ITEM 4 (200 MM)
RNCC: 3 | RNVC: 2
12 Dec 2000
NSN 5330-12-184-9114 121849114 GASKET
5330-12-184-9114
Gasket
121849114
3917-9
RNCC: 3 | RNVC: 2
3917
RNCC: 5 | RNVC: 9
26 Aug 1980
NSN 5330-12-323-1323 123231323 GASKET
5330-12-323-1323
Gasket
123231323
WW 410 110 B
RNCC: 2 | RNVC: 2
WW 410 110 B
RNCC: 3 | RNVC: 2
WW 410 110 B
RNCC: 5 | RNVC: 2
WW 410 110 B
RNCC: 5 | RNVC: 2
25 Oct 1990
NSN 5330-12-386-1545 123861545 GASKET
5330-12-386-1545
Gasket
123861545
120D153220.007.0
RNCC: 2 | RNVC: 2
120D153220.007.0
RNCC: 3 | RNVC: 2
11 Aug 2011
NSN 5330-12-177-7303 121777303 GASKET
5330-12-177-7303
Gasket
121777303
3522030780
RNCC: 3 | RNVC: 2
70-20521-00
RNCC: 5 | RNVC: 2
3522030780
RNCC: 5 | RNVC: 2
14 Feb 1979
NSN 5330-12-702-9530 127029530 GASKET
5330-12-702-9530
Gasket
127029530
VG95211-ML-127029530
RNCC: 2 | RNVC: 2
155N607-59-3
RNCC: 3 | RNVC: 2
0500802529859
RNCC: 5 | RNVC: 2
17 Nov 1997
NSN 5330-12-301-6933 123016933 GASKET
5330-12-301-6933
Gasket
123016933
3001144
RNCC: 2 | RNVC: 2
3001144
RNCC: 3 | RNVC: 2
3001144
RNCC: 3 | RNVC: 2
3 001 144
RNCC: 5 | RNVC: 9
3001144
RNCC: 5 | RNVC: 9
TK-59C-4210-010-115
RNCC: 5 | RNVC: 9
TK4210-010-115
RNCC: 5 | RNVC: 9
3 Nov 1984
NSN 5330-12-304-3778 123043778 GASKET AND PREFORMED PACKING SET
5330-12-304-3778
Gasket And Preformed Packing Set
123043778
23176-260012.00.0
RNCC: 2 | RNVC: 2
23176-260012.00.0
RNCC: 3 | RNVC: 2
10 Jul 1985
NSN 5330-12-352-6414 123526414 GASKET
5330-12-352-6414
Gasket
123526414
5400051-362000.02
RNCC: 2 | RNVC: 2
5400051-362000.02
RNCC: 3 | RNVC: 2
4 Dec 2000
NSN 5330-12-308-4784 123084784 GASKET
5330-12-308-4784
Gasket
123084784
DIN7603-D22X29-AL
RNCC: 2 | RNVC: 2
342252
RNCC: 5 | RNVC: 2
D22X29DIN7603-AL
RNCC: 5 | RNVC: 9
15 Oct 1986
NSN 5330-12-393-8810 123938810 GASKET
5330-12-393-8810
Gasket
123938810
11.59387-0001
RNCC: 3 | RNVC: 2
11.59387-0001
RNCC: 5 | RNVC: 2
17 Oct 2013
NSN 5330-12-177-8431 121778431 PACKING,PREFORMED
5330-12-177-8431
Preformed Packing
121778431
N25-10 25X42X8,5/4,3-90NBR/108
RNCC: 3 | RNVC: 2
N25-10-90NBR108
RNCC: 5 | RNVC: 2
N25-10 25X42X8,5/5-90NBR/108
RNCC: 5 | RNVC: 9
28 Feb 1979
NSN 5330-12-383-8722 123838722 GASKET
5330-12-383-8722
Gasket
123838722
700-12.8.311-001
RNCC: 3 | RNVC: 2
15 Dec 2010
NSN 5330-12-701-8668 127018668 SEAL,PLAIN
5330-12-701-8668
Plain Seal
127018668
VG95211-ML-127018668
RNCC: 2 | RNVC: 2
6243A-11,5-3-2,5
RNCC: 3 | RNVC: 2
6 Feb 1995
NSN 5330-12-152-9017 121529017 PACKING,PREFORMED
5330-12-152-9017
Preformed Packing
121529017
3990-024.326
RNCC: 3 | RNVC: 2
V-30S
RNCC: 3 | RNVC: 2
6-433-0111
RNCC: 5 | RNVC: 2
HDWN71181-V30S-NBR
RNCC: 5 | RNVC: 2
3990-024-326
RNCC: 5 | RNVC: 2
V30ZN361
RNCC: 5 | RNVC: 2
352258902969
RNCC: 5 | RNVC: 2
V-30S
RNCC: 5 | RNVC: 9
ASC1275150
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-312-5655 123125655 SEAL,NONMETALLIC SPECIAL SHAPED SECTION
5330-12-312-5655
Nonmetallic Special Shaped Section Seal
123125655
04.54071-86.00.004.4
RNCC: 3 | RNVC: 2
5800590-4118.002
RNCC: 5 | RNVC: 2
18 Jan 1988
NSN 5330-12-300-2780 123002780 SEAL,NONMETALLIC ROUND SECTION
5330-12-300-2780
Nonmetallic Round Section Seal
123002780
2500135-193211.002.0
RNCC: 2 | RNVC: 2
2500135-193211.002.0
RNCC: 3 | RNVC: 2
20 Jul 1984
NSN 5330-12-305-0448 123050448 FELT,MECHANICAL,PREFORMED
5330-12-305-0448
Preformed Mechanical Felt
123050448
SWN06-0354-12
RNCC: 3 | RNVC: 2
20 Sep 1985
NSN 5330-12-193-8108 121938108 GASKET
5330-12-193-8108
Gasket
121938108
0007-2122-750
RNCC: 3 | RNVC: 2
0007-2122-750
RNCC: 5 | RNVC: 9
WSN07-0004-10-23X35X6-72NBR
RNCC: 5 | RNVC: 9
1 Sep 1982
NSN 5330-12-151-1117 121511117 GASKET
5330-12-151-1117
Gasket
121511117
38067-02.07
RNCC: 2 | RNVC: 2
38067-02-07
RNCC: 5 | RNVC: 9
38067-02.07
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-146-3935 121463935 SEAL,NONMETALLIC STRIP
5330-12-146-3935
Nonmetallic Strip Seal
121463935
C30324-A351-C73
RNCC: 3 | RNVC: 2
C30324A351C73
RNCC: 5 | RNVC: 2
J500884
RNCC: 5 | RNVC: 2
FGSCHRK351T73
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-376-6252 123766252 GASKET SET
5330-12-376-6252
Gasket Set
123766252
6.273-214.0
RNCC: 3 | RNVC: 2
22 Oct 2008
NSN 5330-12-172-7819 121727819 GASKET
5330-12-172-7819
Gasket
121727819
SP02647
RNCC: 3 | RNVC: 2
BZ1076
RNCC: 5 | RNVC: 9
42182-31101-06
RNCC: 5 | RNVC: 9
00-4-119-0032
RNCC: 5 | RNVC: 9
00.4.119.0032
RNCC: 5 | RNVC: 9
0041190032
RNCC: 5 | RNVC: 9
20 Feb 1978
NSN 5330-12-366-8495 123668495 SEAL ASSEMBLY,SHAFT,SPRING LOADED
5330-12-366-8495
Spring Loaded Shaft Seal Assembly
123668495
TNU20LL-C47-16.12-L
RNCC: 3 | RNVC: 2
15 Jun 2005
NSN 5330-12-198-5089 121985089 SEAL,NONMETALLIC SPECIAL SHAPED SECTION
5330-12-198-5089
Nonmetallic Special Shaped Section Seal
121985089
2300172-188003.010.0
RNCC: 2 | RNVC: 2
2300172-188003.010.0
RNCC: 3 | RNVC: 2
2300172-188003.010.0
RNCC: 5 | RNVC: 2
2300172-188003.010.0
RNCC: 5 | RNVC: 9
3 Feb 1984
NSN 5330-12-701-2694 127012694 GASKET
5330-12-701-2694
Gasket
127012694
VG95211-ML-127012694
RNCC: 2 | RNVC: 2
5.12.4805.2000.03
RNCC: 3 | RNVC: 2
6 Feb 1995
NSN 5330-12-383-6279 123836279 GASKET SET
5330-12-383-6279
Gasket Set
123836279
001873
RNCC: 3 | RNVC: 2
04-013-005-0080-00-0
RNCC: 5 | RNVC: 2
16 Nov 2010
NSN 5330-12-365-2641 123652641 VERSTAERKUNG, DICHT
5330-12-365-2641
Dicht Verstaerkung
123652641
2300109-180010.003.0
RNCC: 3 | RNVC: 2
14 Dec 2004
NSN 5330-12-177-4929 121774929 GASKET
5330-12-177-4929
Gasket
121774929
86/11-3
RNCC: 3 | RNVC: 2
86-11-3
RNCC: 5 | RNVC: 9
5 Feb 1979
NSN 5330-12-308-7756 123087756 SEAL,PLAIN
5330-12-308-7756
Plain Seal
123087756
2.9493.109
RNCC: 3 | RNVC: 2
2949 3109
RNCC: 5 | RNVC: 2
29493109EF0140-01
RNCC: 5 | RNVC: 2
14 Nov 1986
NSN 5330-12-365-4107 123654107 PACKING,PREFORMED
5330-12-365-4107
Preformed Packing
123654107
7-G505-0003-008-00-CARBON
RNCC: 3 | RNVC: 2
29 Dec 2004
NSN 5330-12-154-0619 121540619 SEAL,PLAIN
5330-12-154-0619
Plain Seal
121540619
BANIBLNIF19X32X7-88NBR/101
RNCC: 3 | RNVC: 2
BANIBLNIF19X32X7-88NBR101
RNCC: 5 | RNVC: 2
NE78RVST19-32-7
RNCC: 5 | RNVC: 2
30 May 1969
NSN 5330-12-702-0317 127020317 SEAL,PLAIN ENCASED
5330-12-702-0317
Plain Encased Seal
127020317
VG95211-ML-127020317
RNCC: 2 | RNVC: 2
2300A-259-1
RNCC: 3 | RNVC: 2
6 Apr 1995
NSN 5330-12-363-8609 123638609 GASKET
5330-12-363-8609
Gasket
123638609
5.363-438.0
RNCC: 3 | RNVC: 2
30 Jul 2004
NSN 5330-12-161-8033 121618033 RING,WIPER
5330-12-161-8033
Wiper Ring
121618033
A1 4030 N3587
RNCC: 3 | RNVC: 2
1-025-1502-100-16-11BL1PT60
RNCC: 5 | RNVC: 9
102515021001611T60
RNCC: 5 | RNVC: 9
A1N904030
RNCC: 5 | RNVC: 9
P38-45X53X7WS5-590
RNCC: 5 | RNVC: 9
30 May 1969
NSN 5330-12-196-0900 121960900 DICHTUNGSKOERPER
5330-12-196-0900
Dichtungskoerper
121960900
YK6.452.8.850.002.4
RNCC: 3 | RNVC: 2
1217 7193
RNCC: 5 | RNVC: 2
6-452-8-850-002-4
RNCC: 5 | RNVC: 9
26 May 1983
NSN 5330-12-151-2862 121512862 GASKET
5330-12-151-2862
Gasket
121512862
70-20496-00
RNCC: 3 | RNVC: 2
1216 1808
RNCC: 3 | RNVC: 2
12161808
RNCC: 5 | RNVC: 9
6-232-0-853-014-4
RNCC: 5 | RNVC: 9
6.232.0.853.014.4
RNCC: 5 | RNVC: 9
30 May 1969