5330-21-901-7021

Jun 1968 5120-21-639-3714 Inserted Hammer Face Holder 4RNCC: 3 | RNVC: 1 | DAC: 4 6 Jun 1968 5330-21-901-7021

4710-17-101-1921 4710171011921 171011921 is a length of tubing, straight, or prebent to a predetermined angle, with added component(s) that forms an end connection on one or both ends. for flexible tube assemblies, see hose assembly (as modified). for items having perforations in the tubing or attachments, see tube assembly, fire extinguishing system. excludes items having integral preformed or plain ends, tube, bent (as modified), and items which are branched or forked.

3040-00-097-2583 3040000972583 000972583 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

4730-00-141-9011 4730001419011 001419011 is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. it may have side inlet(s). it is used as a junction at the intersection of a tube or tube fitting.

6 23 Apr 1987 5330-21-878-2626 Plain Encased Seal 6424RNCC: 3 | RNVC: 2 | DAC: 2 20 Jun 1978 5330-21-901-7021