5330-21-005-1541
Flat Washer
5330210051541 210051541
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2024
1
![5330-21-005-1541 WASHER,FLAT 5330210051541 210051541 1/1 5330-21-005-1541 WASHER,FLAT 5330210051541 210051541 1/1](https://image.nsnlookup.com/fsc/300/5330.webp)
Marketplace 5330-21-005-1541
Request a Quotation from participating marketplace vendors
Related Documents 5330-21-005-1541 4+ Documents (More...)
210051541 53/fsc-5330 Packing and Gasket Materials from Canada (CA) 5330-21-586-6337 Gasket Materials
21-585-0001 Asbestos Sheet Comp 5330-21-586-6337 https//www.nsnlookup.com /fsg-53/fsc-5330/ca 5330-21-005-1541
Flat Washer 5330210051541 210051541 Materials from Canada (CA) 5330-21-586-6337 Preformed Packing
Flat Washer 5330210051541 210051541 53/fsc-5330 Packing and Gasket Materials from Canada (CA) 5330