5330-66-027-8465

day Upgrade your Account Upgrade 2540-01-213-1512Compartment Vehicular Heater2540012131512 012131512 AT140
(as modified); and network, impedance matching. https//www.nsnlookup.com /fsg-53/fsc-5330/au 5330-66-027-8465
Gasket 5330660278465 660278465,101-801,AT140 how to enable JavaScript in your web browser . 5330

5310-14-275-2633 5310142752633 142752633 is a washer of any peripheral shape having a centrally located hole. both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. the thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. the maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. excludes washer, concave, retainer, packing, and thrust type washers. see also spacer, sleeve; and spacer, stepped.

4810-14-287-7450 4810142877450 142877450 is an item that controls the flow of a fluid by rotation of a ported plug within a suitable ported seat. it must not have any lubrication other than from the fluid controlled, nor contain any nonmetallic seal between plug and seat. see also valve, seatless and valve, plug.

AT140 Computernews Snc is an Active Commercial Supplier with the Cage Code AT140.
Frequently Asked Questions (FAQ) for CAGE AT140 What is CAGE Code AT140?
Snc located at Via Tuscolana 532, Roma, Rm, 00181, Italy.Who is CAGE Code AT140?

5310-14-222-8396 5310142228396 142228396 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.