Premium Information is available for this item - Upgrade for $1 a day
5325-01-657-7210
Panel Fastener Insert
5325016577210 016577210 NAS1835C08
An insert which must have a hole that may be internally threaded with a flange on one end. It may have an undercut on the end opposite the flange to provide a shoulder to allow for mating with another insert. Pre-assembled items will consist of an expansion sleeve and a body which may be flared. Internally threaded items may have a self-locking feature. Excludes INSERT, SCREW THREAD. View more Panel Fastener Insert
November 2023
2
Marketplace 5325-01-657-7210
Request a Quotation from participating marketplace vendors
Related Documents 5325-01-657-7210 1+ Documents (More...)
United States (US) 4. 5325-01-657-7210 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5325-01-657-7210 RQST NE Updated Every Day 5325-01-657-7210 RQST
Restrictions 5325-01-657-7210
5325-01-657-7210 is a Panel Fastener Insert that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5325-01-657-7210
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5325-01-657-7210
- US Air Force (FGGI)
- Effective Date:
- 1 Aug 2016
Approved Sources 5325-01-657-7210
- Part Number
- Manufacturer
- Status
- NAS1835C08
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5325-01-657-7210
- Characteristic
- Specifications
- FIIG
- Specifications
- A05400
- Flange Diameter [ABKK]
- 0.545 Inches Maximum
- Flange Thickness [CWTF]
- 0.060 Inches Nominal
- Hole Type [BQDM]
- Threaded
- Hole Diameter [CWYP]
- 0.092 Inches Minimum And 0.097 Inches Maximum
- Material Document And Classification [MDCL]
- Astm A582/A582m Assn Std Single Material Response Housing
- Material Document And Classification [MDCL]
- Astm A582/A582m Assn Std Single Material Response Nut
- Mounting Hole Quantity [ABTJ]
- 2
- Material [MATT]
- Aluminum Alloy 3003 Or Aluminum Alloy 5052 Or Aluminum Alloy 6061 Cap
- Material [MATT]
- Steel Comp 303 Housing
- Material [MATT]
- Steel Comp 303 Nut
- Part Name Assigned By Controlling Agency [CXCY]
- Insert,Molded In,Blind Threaded,Self-Locking,Nonself-Locking,Floating,Sandwich Panel
- Insert Style [CWXS]
- Protruding Flange
- Material Accommodated Thickness [AGSM]
- 0.686 Inches Minimum And 0.691 Inches Maximum
- Material Document And Classification [MDCL]
- 3003-O Or H14 Per Astm B209 Assn Std 1St Material Response Or 5052-O Or H32 Per Ams-Qq-A-250/8 National Std/Spec 2Nd Material Response Or 6061-O Per Ams4025 National Std/Spec 3Rd Material Response Cap
- Shoulder Diameter [AAXB]
- 0.675 Inches Minimum And 0.685 Inches Maximum
- Thread Size And Series/Type Designator [THDS]
- 0.1640-32 Unjc
- Specification/Standard Data [ZZZK]
- 80205-Nas1835 Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Ams2700,Method I,Class 4 National Std/Spec Single Treatment Response Housing
- Surface Treatment Document And Classification [STDC]
- Ams2700,Method I,Class 4 National Std/Spec Single Treatment Response Nut
- Surface Treatment [SFTT]
- Passivate Housing
- Surface Treatment [SFTT]
- Passivate Nut
Weapon Systems (WSDC) 5325-01-657-7210
DLA Procurement Analysis 5325-01-657-7210
- Last Stock Position:
- 20 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5325-01-657-7210
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- UC
- C-5A GALAXY
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5325-01-657-7210
Freight Information 5325-01-657-7210
5325-01-657-7210 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5325-01-657-7210 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5325-01-657-7210 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5325-01-657-7210 is not classified as a special type of cargo when transported by water. 5325-01-657-7210 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5325-01-657-7210 1 Records
Contracting Technical Data File (CTDF) 5325-01-657-7210 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: