Premium Information is available for this item - Upgrade for $1 a day
5325-01-646-2451
Metallic Grommet
5325016462451 016462451 50-113-2 CA35894G-2
A two-piece metallic item, one piece usually tubular in appearance and flanged at one end, the other piece a plain tooth or spur washer or retaining ring. It is primarily used for lining and reinforcing the edges of holes. The unflanged end is designed to be inserted through a hole and retained in place by being crimped over the plain or tooth washer or retaining ring or by clinching action between the spur washer and the flanged end. Excludes EYELET, METALLIC. View more Metallic Grommet
November 2023
1
Marketplace 5325-01-646-2451
Request a Quotation from participating marketplace vendors
Related Documents 5325-01-646-2451 1+ Documents (More...)
Restrictions 5325-01-646-2451
5325-01-646-2451 is a Metallic Grommet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5325-01-646-2451
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5325-01-646-2451
- US Air Force (FGGI)
- Effective Date:
- 1 Feb 2016
- US Navy (N9BZ)
- Effective Date:
- 1 Jul 2015
- Supplementary Collaborators:
- KE
Approved Sources 5325-01-646-2451
- Part Number
- Manufacturer
- Status
- 50-113-2
- Manufacturer
- 97499 - Bell Textron Inc (Active)
- Source Control
- Source Control
- 50-113-2
- 29372 - Howmet Global Fastening Systems Inc. (Active)
- Primary Buy
- Primary Buy
- 50-113-2
- 60119 - Monadnock Company, The (Active)
- Primary Buy
- Primary Buy
- CA35894G-2
- 29372 - Howmet Global Fastening Systems Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5325-01-646-2451
- Characteristic
- Specifications
- FIIG
- Specifications
- A05400
- Barrel Largest Width [AGMC]
- 0.630 Inches Minimum And 0.640 Inches Maximum
- Barrel Outside Diameter [AGLV]
- 0.234 Inches Minimum And 0.238 Inches Maximum
- Barrel Overall Height [AGLZ]
- 0.180 Inches Minimum And 0.186 Inches Maximum
- Barrel Style [AGLU]
- Funnel Flange Straight Type
- Barrel Height [ADBA]
- 0.174 Inches Nominal
- Flange Length [AFQN]
- 0.245 Inches Minimum And 0.255 Inches Maximum
- Flange Style [CTCJ]
- Flange
- Material [MATT]
- Steel Corrosion Resisting Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Grommet, Flanged Head
- Special Features [FEAT]
- 130 Degree Flange Head Grounding Fastener
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5325-01-646-2451
DLA Procurement Analysis 5325-01-646-2451
- Last Stock Position:
- 9 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5325-01-646-2451
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NV
- JOINT VERTICAL LIFT AIRCRAFT CV-22 (OSPREY)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5325-01-646-2451
Freight Information 5325-01-646-2451
5325-01-646-2451 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 094533. A Sub NMFC of X. It has a NMFC Description of EYELETS OR EYELET HOOKS NOI. 5325-01-646-2451 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 52240 which rates the freight between FCL and LCL. 5325-01-646-2451 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5325-01-646-2451 is not classified as a special type of cargo when transported by water. 5325-01-646-2451 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5325-01-646-2451 2 Records
Contracting Technical Data File (CTDF) 5325-01-646-2451 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: