Premium Information is available for this item - Upgrade for $1 a day
5325-01-412-6675
Panel Fastener Insert
5325014126675 014126675 NAS1836-3-22M
An insert which must have a hole that may be internally threaded with a flange on one end. It may have an undercut on the end opposite the flange to provide a shoulder to allow for mating with another insert. Pre-assembled items will consist of an expansion sleeve and a body which may be flared. Internally threaded items may have a self-locking feature. Excludes INSERT, SCREW THREAD. View more Panel Fastener Insert
May 2023
2
Marketplace 5325-01-412-6675
Request a Quotation from participating marketplace vendors
Related Documents 5325-01-412-6675 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5325-01-412-6675 RQST NE Updated Every Day 5325-01-412-6675 RQST
Updated Every Day 5325-01-412-6675 RQST NE Related Documents 5325-01-412-6675 1+ Documents ( More...
Restrictions 5325-01-412-6675
5325-01-412-6675 is a Panel Fastener Insert that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5325-01-412-6675
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5325-01-412-6675
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5325-01-412-6675
- Part Number
- Manufacturer
- Status
- NAS1836-3-22M
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5325-01-412-6675
- Characteristic
- Specifications
- FIIG
- Specifications
- A05400
- Features Provided [CBBL]
- Potting Hole Or Potting Slot
- Flange Diameter [ABKK]
- 0.441 Inches Minimum And 0.451 Inches Maximum
- Hole Type [BQDM]
- Threaded
- Material [MATT]
- Steel Overall
- Insert Style [CWXS]
- Protruding Flange
- Material Accommodated Thickness [AGSM]
- 0.452 Inches Minimum And 0.457 Inches Maximum
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Overall
- Shoulder Diameter [AAXB]
- 0.260 Inches Nominal
- Overall Length [ABXG]
- 0.682 Inches Nominal
- Special Features [FEAT]
- With Dry Film Lubricant.
- Thread Size And Series/Type Designator [THDS]
- 0.190-32 Unjf
- Specification/Standard Data [ZZZK]
- 80205-Nas1836 Professional/Industrial Association Standard
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
DLA Procurement Analysis 5325-01-412-6675
Management Data 5325-01-412-6675
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5325-01-412-6675
Freight Information 5325-01-412-6675
5325-01-412-6675 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5325-01-412-6675 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5325-01-412-6675 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5325-01-412-6675 is not classified as a special type of cargo when transported by water. 5325-01-412-6675 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5325-01-412-6675 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: