Premium Information is available for this item - Upgrade for $1 a day
5325-01-357-4725
Panel Fastener Insert
5325013574725 013574725 NAS1833 NAS1833C3-750
An insert which must have a hole that may be internally threaded with a flange on one end. It may have an undercut on the end opposite the flange to provide a shoulder to allow for mating with another insert. Pre-assembled items will consist of an expansion sleeve and a body which may be flared. Internally threaded items may have a self-locking feature. Excludes INSERT, SCREW THREAD. View more Panel Fastener Insert
November 2023
5
Marketplace 5325-01-357-4725
Request a Quotation from participating marketplace vendors
Related Documents 5325-01-357-4725 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5325-01-357-4725 RQST NE Updated Every Day 5325-01-357-4725 RQST
Updated Every Day 5325-01-357-4725 RQST NE Related Documents 5325-01-357-4725 5+ Documents ( More...
NAS1833-4-640 An insert which must have a hole that may be internally threaded with a flange on one
NAS1833-4-640 INSERT,PANEL FASTENER 15 EA NS Request Quotation FedMall Updated Every 15 Minutes 5325-
NAS1833-3-375 INSERT,PANEL FASTENER 96 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1833-3-375 INSERT 1 EA NS Request Quotation NAS1833-3-375 INSERT 12 EA NS Request Quotation Subscribe
NAS1833-3-1125 An insert which must have a hole that may be internally threaded with a flange on one
-3-375 NAS1833-3-375M An insert which must have -3-375M An insert which must have a hole that may be
NAS1833-3-350M An insert which must have a hole that may be internally threaded with a flange on one
/fsg-53/fsc-5325/us 5325-01-628-6710 Panel Fastener Insert 5325016286710 016286710 NAS1833-3-835M An
Restrictions 5325-01-357-4725
5325-01-357-4725 is a Panel Fastener Insert that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5325-01-357-4725
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5325-01-357-4725
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5325-01-357-4725
- Part Number
- Manufacturer
- Status
- NAS1833
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS1833C3-750
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5325-01-357-4725
- Characteristic
- Specifications
- FIIG
- Specifications
- A05400
- Features Provided [CBBL]
- Potting Hole And Potting Slot
- Flange Diameter [ABKK]
- 0.550 Inches Minimum And 0.560 Inches Maximum
- Flange Thickness [CWTF]
- 0.060 Inches Nominal
- Hole Type [BQDM]
- Threaded
- Material [MATT]
- Steel Comp 303 Overall
- Insert Style [CWXS]
- Protruding Flange
- Material Accommodated Thickness [AGSM]
- 0.561 Inches Minimum And 0.566 Inches Maximum
- Material Document And Classification [MDCL]
- Astm A582 Assn Std Single Material Response Overall
- Overall Length [ABXG]
- 0.750 Inches Nominal
- Special Features [FEAT]
- Solid Film Lubricant Apply On Threads Only
- Thread Size And Series/Type Designator [THDS]
- 0.190-32 Unjf
- Specification/Standard Data [ZZZK]
- 80205-Nas1833 Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
DLA Procurement Analysis 5325-01-357-4725
Management Data 5325-01-357-4725
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5325-01-357-4725
Freight Information 5325-01-357-4725
5325-01-357-4725 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5325-01-357-4725 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5325-01-357-4725 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5325-01-357-4725 is not classified as a special type of cargo when transported by water. 5325-01-357-4725 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5325-01-357-4725 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: