Premium Information is available for this item - Upgrade for $1 a day
5325-01-106-1213
Metallic Grommet
5325011061213 011061213 4002-N3-A 4002N3 830.620 MEP-00005787 MEP-00005077
A two-piece metallic item, one piece usually tubular in appearance and flanged at one end, the other piece a plain tooth or spur washer or retaining ring. It is primarily used for lining and reinforcing the edges of holes. The unflanged end is designed to be inserted through a hole and retained in place by being crimped over the plain or tooth washer or retaining ring or by clinching action between the spur washer and the flanged end. Excludes EYELET, METALLIC. View more Metallic Grommet
November 2023
33
Marketplace 5325-01-106-1213
Request a Quotation from participating marketplace vendors
Related Documents 5325-01-106-1213 5+ Documents (More...)
B92598 21188-00226 4002-N3 9FSC Managed by United Kingdom NSN Created on 25 Apr 1991 Data Last Changed
RNCC 5 RNVC 2 DAC 2 21188-00226 K0662 - Leonardo Mw Ltd (Replaced) Secondary Buy RNCC 5 RNVC 2 DAC 2 4002-N3
NumberManufacturerStatus4002-N3-B F0224 - Howmet Fixations Simmonds Sas (Active) Original Design RNCC 3 RNVC 9 DAC 4 4002-N3
Restrictions 5325-01-106-1213
5325-01-106-1213 is a Metallic Grommet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5325-01-106-1213
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5325-01-106-1213
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BFCT
- US Coast Guard (C918)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- C004
- Supplementary Receivers:
- XH
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Poland (WP01)
- Effective Date:
- 1 Jul 2011
- Brazil (YA01)
- Effective Date:
- 1 Jul 2014
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Columbia (YC01)
- Effective Date:
- 1 Jun 2015
- Singapore (YJ01)
- Effective Date:
- 1 May 2013
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Jul 1994
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1997
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5325-01-106-1213
- Part Number
- Manufacturer
- Status
- 4002N3
- Manufacturer
- 71286 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- 4002N3
- D0680 - Howmet Fastening Systems Kelkheim (Active)
- Secondary Buy
- Secondary Buy
- 830.620
- CN1L2 - Stemme Gmbh (Active)
- Secondary Buy
- Secondary Buy
- MEP-00005787
- FAQ15 - Safran Electronics & Defense (Active)
- Secondary Buy
- Secondary Buy
- MEP-00005077
- FAQ15 - Safran Electronics & Defense (Active)
- Secondary Buy
- Secondary Buy
- 4002-N3-A
- 71286 - Howmet Global Fastening Systems Inc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5325-01-106-1213
- Characteristic
- Specifications
- FIIG
- Specifications
- A05400
- Barrel Height [ADBA]
- 0.193 Inches Minimum And 0.203 Inches Maximum
- Barrel Outside Diameter [AGLV]
- 0.867 Inches Minimum And 0.876 Inches Maximum
- Barrel Style [AGLU]
- Straight Round Type
- Color [HUES]
- Any Acceptable Overall
- Flange Length [AFQN]
- 0.467 Inches Minimum And 0.473 Inches Maximum
- Flange Style [CTCJ]
- Flange
- Flange Width [AGFF]
- 0.120 Inches Minimum And 0.128 Inches Maximum
- Material [MATT]
- Steel Overall
- Washer Style [AAVV]
- Flat
Weapon Systems (WSDC) 5325-01-106-1213
DLA Procurement Analysis 5325-01-106-1213
- Last Stock Position:
- 571 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5325-01-106-1213
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- CC
- Other Aircraft Categories
Multi-Application Aviation Spares
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5325-01-106-1213
Freight Information 5325-01-106-1213
5325-01-106-1213 has freight characteristics managed by Australia.It has a National Motor Freight Classification (NMFC) of 094533. A Sub NMFC of X. It has a NMFC Description of EYELETS OR EYELET HOOKS NOI. 5325-01-106-1213 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 52240 which rates the freight between FCL and LCL. 5325-01-106-1213 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5325-01-106-1213 is not classified as a special type of cargo when transported by water. 5325-01-106-1213 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5325-01-106-1213
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 5325-01-106-1213 3 Records
Contracting Technical Data File (CTDF) 5325-01-106-1213 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: