Premium Information is available for this item - Upgrade for $1 a day
5325-00-202-1314
Snapslide Fastener Post
5325002021314 002021314 MS21332-34
An item which is part of a FASTENER, SNAPSLIDE and is used to fasten and hold in position the LATCH, SNAPSLIDE FASTENER and LATCH GUIDE, SNAPSLIDE FASTENER. View more Snapslide Fastener Post
May 2023
11
Marketplace 5325-00-202-1314
Request a Quotation from participating marketplace vendors
Related Documents 5325-00-202-1314 1+ Documents (More...)
NE Updated Every Day 5325-00-202-1314 RQST Updated Every Day 5325-00-202-1314 RQST NE Related Documents
5325-00-202-1314 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5325/us 5325-00-202-1314
Restrictions 5325-00-202-1314
5325-00-202-1314 is a Snapslide Fastener Post that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5325-00-202-1314
- US Army (A919)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CL
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKEHD
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5325-00-202-1314
- Part Number
- Manufacturer
- Status
- MS21332-34
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
Datasheet 5325-00-202-1314
- Characteristic
- Specifications
- FIIG
- Specifications
- A05400
- Head Outside Diameter [AGPW]
- 0.373 Inches Minimum And 0.377 Inches Maximum
- Hole Depth [AAZQ]
- 0.123 Inches Minimum And 0.127 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Corrosion Resisting Overall
- Mounting Hole Diameter [ABTB]
- 0.084 Inches Minimum And 0.088 Inches Maximum
- Post Shoulder Length [AGPY]
- 0.073 Inches Minimum And 0.077 Inches Maximum
- Post Shank Length [ALBQ]
- 0.160 Inches Minimum And 0.164 Inches Maximum
- Shank Outside Diameter [AGGZ]
- 0.123 Inches Minimum And 0.125 Inches Maximum
- Shoulder Outside Diameter [AGPX]
- 0.182 Inches Minimum And 0.186 Inches Maximum
- Snapslide Post Style [AGPV]
- Post
- Overall Length [ABHP]
- 0.297 Inches Minimum And 0.303 Inches Maximum
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5325-00-202-1314
DLA Procurement Analysis 5325-00-202-1314
Management Data 5325-00-202-1314
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5325-00-202-1314
Freight Information 5325-00-202-1314
5325-00-202-1314 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 066440. A Sub NMFC of Z. It has a NMFC Description of FASTENERS CURTAIN/SNAP METAL. 5325-00-202-1314 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 36960 which rates the freight between FCL and LCL. 5325-00-202-1314 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5325-00-202-1314 is not classified as a special type of cargo when transported by water. 5325-00-202-1314 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5325-00-202-1314 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: