5325-27-017-3729
Push Button Fastener Stud
5325270173729 270173729 1009.1IS.0044-10
A metal fastening device having retractable engaging prong(s) or engaging rings actuated by a spring loaded button designed to mate with a SOCKET, PUSH BUTTON FASTENER. May include a clinch plate. View more Push Button Fastener Stud
Managed by Turkey
NSN Created on 19 Jun 2003
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5325-27-017-3729
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5325-27-017-3729 4+ Documents (More...)
2003 5325-21-857-5941 Push Button Fastener Stud PL301-2-3RNCC: 3 | RNVC: 2 | DAC: 6 11 Dec 1969 5325-27-017-3729
5340-27-017-3863 5340270173863 270173863 is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. excludes brace (as modified); bracket, angle; and bracket, double angle. see also bracket (1), electrical connector; bracket, fire extinguisher; bracket, solenoid; bracket, track, sliding door; and retainer (as modified).
5360-27-017-3575 5360270173575 270173575 is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and spring, reinforcing, hose.
3040-27-017-3798 3040270173798 270173798 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
Restrictions 5325-27-017-3729
End Users 5325-27-017-3729
- Turkey (ZW)
Approved Sources 5325-27-017-3729
- Part Number
- Manufacturer
- Status
- 1009.1IS.0044-10
- Manufacturer
- T0575 - K.K.K.2 Nci Ana Bakim Merkezi (Active)
- Related Standard
- Related Standard
NATO Stock Numbers Related to 5325-27-017-3729
5325-37-514-0638 5325-12-190-0569 5325-14-300-9764 5325-01-624-1880 5325-37-522-4021 5325-00-493-9928 5325-00-074-3422 5325-01-306-0224 5325-12-378-3842 5325-27-017-3730 5325-98-206-3490 5325-27-024-4737 5325-33-108-1909 5325-01-614-7366 2510-12-136-0676 5325-99-454-4719 5325-00-085-6070 5325-01-465-1040