5325-22-613-6848

3040-22-613-6611 3040226136611 226136611 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

2003 5325-98-204-3342 Snap Fastener Socket CLIP,NAME TAGRNCC: 3 | RNVC: 2 | DAC: 3 10 Mar 1995 5325-22-613-6848

2010 5365-22-613-6614 Ring Spacer OM8540-05.0 FIG.1-4RNCC: 3 | RNVC: 2 | DAC: 4 10 Jul 2006 5325-22-613-6848

8145-99-264-1068 8145992641068 992641068 is a shipping and storage container specifically designed for vehicular equipment and spare parts.

3120-01-264-1068 3120012641068 012641068 is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.