5325-12-161-2346

24 May 2005 5325-12-316-3753 Snap Fastener Cap 525008RNCC: 5 | RNVC: 2 | DAC: 3 13 Jan 1989 5325-12-161-2346

3020-00-300-0025 3020003000025 003000025

2530-14-300-0025 2530143000025 143000025 is an item of flexible, nonmetallic construction, designed to convert air pressure or vacuum into mechanical force when installed in a brake chamber.

5306-99-300-0025 5306993000025 993000025 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.

5915-01-231-3911 5915012313911 012313911 is an item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. excludes filter, low pass and suppressor, ignition interference. for items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. see also limiter, electrical noise.