Premium Information is available for this item - Upgrade for $1 a day
5320-01-542-8595
Blind Rivet
5320015428595 015428595 JEDMIC C-SPEC C9512 MS21140U14-10
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY. View more Blind Rivet
May 2023
2
Marketplace 5320-01-542-8595
Request a Quotation from participating marketplace vendors
Related Documents 5320-01-542-8595 4+ Documents (More...)
Blind Rivet 5320015428595 015428595 5320-01-542-8595 5320015428595 015428595 is an item consisting
E MS21140-1003 11815 - Sps Technologies, Llc (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 5 JEDMIC C-SPEC C9512
NumberManufacturerStatusMS21140-1004 80205 - National Aerospace Standards (Active) Primary Buy RNCC 3 RNVC 2 DAC E JEDMIC C-SPEC C9512
NumberManufacturerStatusC9512-06-05 11815 - Sps Technologies, Llc (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 JEDMIC C-SPEC C9512
Restrictions 5320-01-542-8595
5320-01-542-8595 is a Blind Rivet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5320-01-542-8595
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5320-01-542-8595
- US Air Force (FUGI)
- Effective Date:
- 1 Aug 2006
Approved Sources 5320-01-542-8595
- Part Number
- Manufacturer
- Status
- MS21140U14-10
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- JEDMIC C-SPEC C9512
- 11815 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS21140U14-10
- 11815 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5320-01-542-8595
- Characteristic
- Specifications
- FIIG
- Specifications
- A040A0
- Material [MATT]
- Iron Alloy 660 Overall
- Material Document And Classification [MDCL]
- Ams 5737 Assn Std Single Material Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Heat Treatment [HEAT]
- Annealed Overall
- Shear Strength [CQSX]
- 95000 Single Pounds Per Square Inch
- Head Style [AASK]
- Flush (Flat) Countersunk (Included Angle - Less Than 135 Deg W Or W/O Chamfer)
- Head Major Diameter [AAZG]
- 0.763 Inches Maximum
- Countersink Angle [CRSQ]
- 100.0 Degrees Nominal
- Shank Style [AAZF]
- Self-Plugging Mechanically Locked Stem
- Fastener Length [AASB]
- 1.713 Inches Nominal
- Shank Diameter [AAZE]
- 0.437 Inches Nominal
- Grip Length [ANEE]
- 0.625 Inches Nominal
- Lubrication [ABAJ]
- Dry Film
DLA Procurement Analysis 5320-01-542-8595
Management Data 5320-01-542-8595
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5320-01-542-8595
Freight Information 5320-01-542-8595
5320-01-542-8595 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106510. A Sub NMFC of X. It has a NMFC Description of RIVETS I/S PLAIN/GALVANIZED ETC. 5320-01-542-8595 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54760 which rates the freight between FCL and LCL. 5320-01-542-8595 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5320-01-542-8595 is not classified as a special type of cargo when transported by water. 5320-01-542-8595 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5320-01-542-8595 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: