Premium Information is available for this item - Upgrade for $1 a day
5320-01-414-9112
Pin-Rivet
5320014149112 014149112 HL12VAZ-14-40 HL12VAP-14-40
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. View more Pin-Rivet
May 2023
9
Marketplace 5320-01-414-9112
Request a Quotation from participating marketplace vendors
Related Documents 5320-01-414-9112 5+ Documents (More...)
Pin-Rivet 5320014149112 014149112 5320-01-414-9112 5320014149112 014149112 is a metallic or nonmetallic
Pin-Rivet 5320014149112 014149112 5320-01-414-9112 5320014149112 014149112 is a metallic or nonmetallic
Pin-Rivet 5320014149112 014149112 5320-01-414-9112 5320014149112 014149112 is a metallic or nonmetallic
Pin-Rivet 5320014149112 014149112 5320-01-414-9112 5320014149112 014149112 is a metallic or nonmetallic
Pin-Rivet 5320014149112 014149112 5320-01-414-9112 5320014149112 014149112 is a metallic or nonmetallic
Restrictions 5320-01-414-9112
5320-01-414-9112 is a Pin-Rivet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5320-01-414-9112
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5320-01-414-9112
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5320-01-414-9112
- Part Number
- Manufacturer
- Status
- HL12VAP-14-40
- Manufacturer
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- HL12VAP-14-40
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- HL12VAP-14-40
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HL12VAP-14-40
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HL12VAP-14-40
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- HL12VAP-14-40
- 60516 - West Coast Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HL12VAP-14-40
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HL12VAP-14-40
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- HL12VAP-14-40
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HL12VAP-14-40
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- HL12VAZ-14-40
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Advisory Reference
- Advisory Reference
- HL12VAZ-14-40
- 06725 - Sps Technologies, Llc (Active)
- Advisory Reference
- Advisory Reference
- HL12VAZ-14-40
- 97928 - Huck Intl Inc (Replaced)
- Advisory Reference
- Advisory Reference
- HL12VAZ-14-40
- 73197 - Hi-Shear Corporation (Active)
- Advisory Reference
- Advisory Reference
- HL12VAZ-14-40
- 60516 - West Coast Aerospace, Inc. (Active)
- Advisory Reference
- Advisory Reference
- HL12VAZ-14-40
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Advisory Reference
- Advisory Reference
Datasheet 5320-01-414-9112
- Characteristic
- Specifications
- FIIG
- Specifications
- A528U0
- Fastener Length [AASB]
- 3.130 Inches Minimum And 3.140 Inches Maximum
- Grip Length [ANEE]
- 2.495 Inches Minimum And 2.505 Inches Maximum
- Head Height [AASU]
- 0.150 Inches Minimum And 0.160 Inches Maximum
- Head Major Diameter [AAZG]
- 0.592 Inches Minimum And 0.676 Inches Maximum
- Head Style [AASK]
- Err-090
- Material [MATT]
- Titanium Alloy Uns R56400 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Size [CQJX]
- 0.437 Inches
- Lubrication [ABAJ]
- Cetyl Alcohol, Spec 305, Hi-Shear Corp
- Material Document And Classification [MDCL]
- Ams 4928 Assn Std Single Material Response Overall Or Ams 4967 Assn Std Single Material Response Overall
- Shank Diameter [AAZE]
- 0.4260 Inches Minimum And 0.4310 Inches Maximum
- Shear Strength [CQSX]
- 95000 Single Pounds Per Square Inch
- Shank Style [AAZF]
- Special Features [FEAT]
- Threads Are Color Coded Black.
- Thread Series Designator [THSD]
- Unjf
- Width Between Flats [AATB]
- 0.1895 Inches Minimum And 0.1920 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Hi Kote 1,Cagec 73197 Mfr Ref Single Treatment Response Overall
- Surface Treatment [SFTT]
- Aluminum Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
Weapon Systems (WSDC) 5320-01-414-9112
DLA Procurement Analysis 5320-01-414-9112
Management Data 5320-01-414-9112
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5320-01-414-9112
Freight Information 5320-01-414-9112
5320-01-414-9112 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 136500. A Sub NMFC of Z. It has a NMFC Description of METAL NOI/METAL ALLOYS NOI. 5320-01-414-9112 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 68455 which rates the freight between FCL and LCL. 5320-01-414-9112 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5320-01-414-9112 is not classified as a special type of cargo when transported by water. 5320-01-414-9112 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5320-01-414-9112
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5320-01-414-9112 August 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: