Premium Information is available for this item - Upgrade for $1 a day
5320-01-413-2659
Pin-Rivet
5320014132659 014132659 HLT622SD-8-7 HLY622SD-8-7 03A064-8-7FX
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. View more Pin-Rivet
August 2023
8
Marketplace 5320-01-413-2659
Request a Quotation from participating marketplace vendors
Related Documents 5320-01-413-2659 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5320-01-413-2659 RQST NE Updated Every Day 5320-01-413-2659 RQST
Updated Every Day 5320-01-413-2659 RQST NE Related Documents 5320-01-413-2659 1+ Documents ( More...
Restrictions 5320-01-413-2659
5320-01-413-2659 is a Pin-Rivet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5320-01-413-2659
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5320-01-413-2659
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5320-01-413-2659
- Part Number
- Manufacturer
- Status
- HLT622SD-8-7
- Manufacturer
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- HLT622SD-8-7
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- HLT622SD-8-7
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- HLY622SD-8-7
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HLT622SD-8-7
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 03A064-8-7FX
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- HLT622SD-8-7
- 60516 - West Coast Aerospace, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HLT622SD-8-7
- 9N513 - Voi-Shan/Chatsworth (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5320-01-413-2659
- Characteristic
- Specifications
- FIIG
- Specifications
- A528U0
- Fastener Length [AASB]
- 0.863 Inches Minimum And 0.883 Inches Maximum
- Grip Length [ANEE]
- 0.433 Inches Minimum And 0.443 Inches Maximum
- Head Height [AASU]
- 0.080 Inches Minimum And 0.090 Inches Maximum
- Head Major Diameter [AAZG]
- 0.415 Inches Minimum And 0.440 Inches Maximum
- Head Style [AASK]
- Err-090
- Identification Code Color [AAPC]
- Yellow
- Material [MATT]
- Nickel Alloy 718 Overall
- Minimum Tensile Strength [CQBC]
- 7750 Pounds Per Square Inch
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Lubrication [ABAJ]
- Cetyl Alcohol
- Material Document And Classification [MDCL]
- Ams5662 Assn Std Single Material Response Overall
- Shank Diameter [AAZE]
- 0.2646 Inches Minimum And 0.2651 Inches Maximum
- Shear Strength [CQSX]
- 12260 Double Pounds Per Square Inch
- Shank Style [AAZF]
- Pin-Rivet, Straight, Threaded
- Special Features [FEAT]
- Powder Blast Top Of Head. 0.0156 Oversize Part, Restricted Usage, For Repair Work Only.
- Thread Series Designator [THSD]
- Unjf
- Width Between Flats [AATB]
- 0.0947 Inches Minimum And 0.0967 Inches Maximum
- Specification/Standard Data [ZZZK]
- 1W025-03A064 Manufacturers Standard
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
DLA Procurement Analysis 5320-01-413-2659
Management Data 5320-01-413-2659
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5320-01-413-2659
Freight Information 5320-01-413-2659
5320-01-413-2659 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106510. A Sub NMFC of X. It has a NMFC Description of RIVETS I/S PLAIN/GALVANIZED ETC. 5320-01-413-2659 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54760 which rates the freight between FCL and LCL. 5320-01-413-2659 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5320-01-413-2659 is not classified as a special type of cargo when transported by water. 5320-01-413-2659 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5320-01-413-2659 2 Records
Contracting Technical Data File (CTDF) 5320-01-413-2659 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: