Premium Information is available for this item - Upgrade for $1 a day
5320-01-390-3364
Pin-Rivet
5320013903364 013903364 HLT452SS-12-30 AIC-L782V6U30F 03A076-12-30F
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. View more Pin-Rivet
May 2023
12
Marketplace 5320-01-390-3364
Request a Quotation from participating marketplace vendors
Related Documents 5320-01-390-3364 1+ Documents (More...)
Restrictions 5320-01-390-3364
5320-01-390-3364 is a Pin-Rivet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5320-01-390-3364
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5320-01-390-3364
- Part Number
- Manufacturer
- Status
- HLT452SS-12-30
- Manufacturer
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- HLT452SS-12-30
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- HLT452SS-12-30
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- HLT452SS-12-30
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- AIC-L782V6U30F
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HLT452SS-12-30
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 03A076-12-30F
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- HLT452SS-12-30
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- HLT452SS-12-30
- 9N513 - Voi-Shan/Chatsworth (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- HLT452SS-12-30
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5320-01-390-3364
- Characteristic
- Specifications
- FIIG
- Specifications
- A528U0
- Fastener Length [AASB]
- 2.410 Inches Minimum And 2.430 Inches Maximum
- Grip Length [ANEE]
- 1.870 Inches Minimum And 1.880 Inches Maximum
- Head Height [AASU]
- 0.130 Inches Minimum And 0.140 Inches Maximum
- Head Style [AASK]
- Err-090
- Head Major Diameter [AAZG]
- 0.565 Inches Minimum And 0.600 Inches Maximum
- Identification Code Color [AAPC]
- Blue
- Material [MATT]
- Titanium Alloy Uns R56400 Overall
- Minimum Tensile Strength [CQBC]
- 14000 Pounds Per Square Inch
- Nominal Thread Size [CQJX]
- 0.375 Inches
- Lubrication [ABAJ]
- Cetyl Alcohol, Spec 305, Hi-Shear Corp
- Material Document And Classification [MDCL]
- Ams 4928 Assn Std Single Material Response Overall Or Ams4967 Assn Std Single Material Response Overall
- Shank Diameter [AAZE]
- 0.3740 Inches Minimum And 0.3745 Inches Maximum
- Shear Strength [CQSX]
- 21000 Double Pounds Per Square Inch
- Shank Style [AAZF]
- Pin-Rivet, Straight, Threaded
- Special Features [FEAT]
- Grit Blast Top Of Head, With Color Light Blue On Thread End
- Thread Series Designator [THSD]
- Unjf
- Width Between Flats [AATB]
- 0.1582 Inches Minimum And 0.1617 Inches Maximum
- Specification/Standard Data [ZZZK]
- 73197-Hlt452 Manufacturers Standard
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
DLA Procurement Analysis 5320-01-390-3364
Management Data 5320-01-390-3364
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5320-01-390-3364
Freight Information 5320-01-390-3364
5320-01-390-3364 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106510. A Sub NMFC of X. It has a NMFC Description of RIVETS I/S PLAIN/GALVANIZED ETC. 5320-01-390-3364 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54760 which rates the freight between FCL and LCL. 5320-01-390-3364 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5320-01-390-3364 is not classified as a special type of cargo when transported by water. 5320-01-390-3364 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5320-01-390-3364 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: