Premium Information is available for this item - Upgrade for $1 a day
5320-01-381-1318
Blind Rivet
5320013811318 013811318 MBF2113C8-550 03A146V08-550
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY. View more Blind Rivet
May 2023
3
Marketplace 5320-01-381-1318
Request a Quotation from participating marketplace vendors
Related Documents 5320-01-381-1318 1+ Documents (More...)
Restrictions 5320-01-381-1318
5320-01-381-1318 is a Blind Rivet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5320-01-381-1318
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5320-01-381-1318
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5320-01-381-1318
- Part Number
- Manufacturer
- Status
- MBF2113C8-550
- Manufacturer
- 98524 - Monogram Aerospace Fasteners, Inc (Active)
- Primary Buy
- Primary Buy
- 03A146V08-550
- 1W025 - Northrop Grumman Systems Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MBF2113C8-550
- 5M902 - Howmet Global Fastening Systems Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5320-01-381-1318
- Characteristic
- Specifications
- FIIG
- Specifications
- A040A0
- Countersink Angle [CRSQ]
- 129.0 Degrees Minimum And 131.0 Degrees Maximum
- Expansion Device [ABAF]
- Threaded Stem
- Fastener Length [AASB]
- 1.250 Inches Minimum
- Grip Length [ANEE]
- 0.500 Inches Minimum And 0.550 Inches Maximum
- Head Style [AASK]
- Flush (Flat) Countersunk (Included Angle - Less Than 135 Deg W Or W/O Chamfer)
- Head Major Diameter [AAZG]
- 0.463 Inches Minimum
- Material Document And Classification [MDCL]
- Mil-T-9047 Mil Spec 1St Material Response Nut Or Ams4928 Assn Std 2Nd Material Response Nut Or Ams5732 Assn Std 3Rd Material Response Nut
- Material [MATT]
- Iron Alloy 660 Stem
- Material [MATT]
- Steel Comp 304 Sleeve
- Material [MATT]
- Titanium Alloy Nut Or Titanium Alloy Uns R56400 Nut
- Lubrication [ABAJ]
- Paraffin Wax Or Cetyl Alcohol Or Dry Film
- Material Document And Classification [MDCL]
- Ams5732 Assn Std Single Material Response Stem
- Material Document And Classification [MDCL]
- Ams5639 Assn Std Single Material Response Sleeve
- Shank Diameter [AAZE]
- 0.2575 Inches Minimum And 0.2595 Inches Maximum
- Special Features [FEAT]
- C In P/N Is A Special Lubricant And Finish As Per Specification Mbf 2002.
- Shank Style [AAZF]
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Assn Std 1St Treatment Response Sleeve
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Assn Std 1St Treatment Response Stem
- Surface Treatment [SFTT]
- Passivate Stem
- Surface Treatment [SFTT]
- Passivate Sleeve
DLA Procurement Analysis 5320-01-381-1318
Management Data 5320-01-381-1318
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5320-01-381-1318
Freight Information 5320-01-381-1318
5320-01-381-1318 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106510. A Sub NMFC of X. It has a NMFC Description of RIVETS I/S PLAIN/GALVANIZED ETC. 5320-01-381-1318 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54760 which rates the freight between FCL and LCL. 5320-01-381-1318 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5320-01-381-1318 is not classified as a special type of cargo when transported by water. 5320-01-381-1318 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5320-01-381-1318 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: