Premium Information is available for this item - Upgrade for $1 a day
5320-01-336-7628
Pin-Rivet
5320013367628 013367628 TLD956-5-12E27 TLD956-5-12E-27
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. View more Pin-Rivet
November 2023
9
Marketplace 5320-01-336-7628
Request a Quotation from participating marketplace vendors
Related Documents 5320-01-336-7628 2+ Documents (More...)
Restrictions 5320-01-336-7628
5320-01-336-7628 is a Pin-Rivet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5320-01-336-7628
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5320-01-336-7628
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5320-01-336-7628
- Part Number
- Manufacturer
- Status
- TLD956-5-12E-27
- Manufacturer
- 17446 - Huck International, Inc. (Active)
- Primary Buy
- Primary Buy
- TLD956-5-12E-27
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- TLD956-5-12E27
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- TLD956-5-12E27
- 5M902 - Howmet Global Fastening Systems Inc. (Active)
- Secondary Buy
- Secondary Buy
- TLD956-5-12E27
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- TLD956-5-12E-27
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- TLD956-5-12E-27
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- TLD956-5-12E-27
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5320-01-336-7628
- Characteristic
- Specifications
- FIIG
- Specifications
- A528U0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.121 Inches Minimum And 1.146 Inches Maximum
- Grip Length [ANEE]
- 0.740 Inches Minimum And 0.755 Inches Maximum
- Head Style [AASK]
- Flush Countersunk
- Head Major Diameter [AAZG]
- 0.522 Inches Maximum
- Material [MATT]
- Steel Comp Xm-13 Overall
- Minimum Tensile Strength [CQBC]
- 220000 Pounds Per Square Inch
- Nominal Thread Size [CQJX]
- 0.312 Inches
- Lubrication [ABAJ]
- Dry Film And Cetyl Alcohol
- Material Document And Classification [MDCL]
- Ams 5629 Assn Std Single Material Response Overall
- Shank Diameter [AAZE]
- 0.3547 Inches Nominal
- Shear Strength [CQSX]
- 125000 Single Pounds Per Square Inch
- Shank Style [AAZF]
- Pin-Rivet, Tapered, Threaded
- Special Features [FEAT]
- 8-32Unjc-3B Thread Size,0.390 In. Lg Along The Longitudinal Axis From The Head End. 0.120 In. Slot Lg. 0.060 In. Slot W Located 0.330 In. From Top Of Head To Center Of Slot
- Thread Series Designator [THSD]
- Unjf
- Tip Diameter [AAZU]
- 0.3423 Inches Nominal
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 5320-01-336-7628
DLA Procurement Analysis 5320-01-336-7628
- Last Stock Position:
- 174 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5320-01-336-7628
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5320-01-336-7628
Freight Information 5320-01-336-7628
5320-01-336-7628 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106510. A Sub NMFC of X. It has a NMFC Description of RIVETS I/S PLAIN/GALVANIZED ETC. 5320-01-336-7628 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54760 which rates the freight between FCL and LCL. 5320-01-336-7628 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5320-01-336-7628 is not classified as a special type of cargo when transported by water. 5320-01-336-7628 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5320-01-336-7628
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5320-01-336-7628 1 Records
Contracting Technical Data File (CTDF) 5320-01-336-7628 April 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: