Premium Information is available for this item - Upgrade for $1 a day
5320-01-111-2837
Pin-Rivet
5320011112837 011112837 TL310-8-20
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. View more Pin-Rivet
May 2023
9
Marketplace 5320-01-111-2837
Request a Quotation from participating marketplace vendors
Related Documents 5320-01-111-2837 4+ Documents (More...)
Pin-Rivet 5320011112837 011112837,TL310-8-20 5320-01-111-2837 5320011112837 011112837 is a metallic
Pin-Rivet 5320011112837 011112837,TL310-8-20 5320-01-111-2837 5320011112837 011112837 is a metallic
Pin-Rivet 5320011112837 011112837,TL310-8-20 5320-01-111-2837 5320011112837 011112837 is a metallic
Pin-Rivet 5320011112837 011112837,TL310-8-20 5320-01-111-2837 5320011112837 011112837 is a metallic
Restrictions 5320-01-111-2837
5320-01-111-2837 is a Pin-Rivet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5320-01-111-2837
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5320-01-111-2837
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5320-01-111-2837
- Part Number
- Manufacturer
- Status
- TL310-8-20
- Manufacturer
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- TL310-8-20
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- TL310-8-20
- 17446 - Huck International, Inc. (Active)
- Primary Buy
- Primary Buy
- TL310-8-20
- C4293 - Fairchild Fasteners Europe - Vsd (Active)
- Secondary Buy
- Secondary Buy
- TL310-8-20
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- TL310-8-20
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- TL310-8-20
- 80539 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- TL310-8-20
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5320-01-111-2837
- Characteristic
- Specifications
- FIIG
- Specifications
- A528U0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.725 Inches Minimum And 1.750 Inches Maximum
- Grip Length [ANEE]
- 1.240 Inches Minimum And 1.255 Inches Maximum
- Head Major Diameter [AAZG]
- 1.087 Inches Maximum
- Head Style [AASK]
- Flush Countersunk
- Material Document And Classification [MDCL]
- Mil-S-6049 Mil Spec 1St Material Response Overall Or Mil-S-5000 Mil Spec 2Nd Material Response Overall
- Material [MATT]
- Steel Comp 8740 Overall Or Steel Comp E4340 Overall
- Minimum Tensile Strength [CQBC]
- 180000 Pounds Per Square Inch
- Nominal Thread Size [CQJX]
- 0.500 Inches
- Lubrication [ABAJ]
- Cetyl Alcohol
- Shank Diameter [AAZE]
- 0.5608 Inches Nominal
- Shank Style [AAZF]
- Pin-Rivet, Tapered, Threaded
- Shear Strength [CQSX]
- 108000 Single Pounds Per Square Inch
- Tip Diameter [AAZU]
- 0.5414 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 20
DLA Procurement Analysis 5320-01-111-2837
Management Data 5320-01-111-2837
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5320-01-111-2837
Freight Information 5320-01-111-2837
5320-01-111-2837 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 106510. A Sub NMFC of X. It has a NMFC Description of RIVETS I/S PLAIN/GALVANIZED ETC. 5320-01-111-2837 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 54760 which rates the freight between FCL and LCL. 5320-01-111-2837 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5320-01-111-2837 is not classified as a special type of cargo when transported by water. 5320-01-111-2837 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5320-01-111-2837 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: