Premium Information is available for this item - Upgrade for $1 a day
5320-01-096-5630
Threaded Pin-Rivet Collar
5320010965630 010965630 70400-02251-111
A soft metal or nonmetal sleeve, designed to mate with a PIN-RIVET. It may include an external wrenching facility which breaks off at a perdetermined torque to form a head. View more Pin-Rivet Collar
November 2023
4
Marketplace 5320-01-096-5630
Request a Quotation from participating marketplace vendors
Related Documents 5320-01-096-5630 1+ Documents (More...)
Updated Every Day 5320-01-096-5630 RQST NE Related Documents 5320-01-096-5630 1+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5320/us 5320-01-096-5630 Threaded Pin-Rivet Collar 5320010965630
Restrictions 5320-01-096-5630
5320-01-096-5630 is a Threaded Pin-Rivet Collar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5320-01-096-5630
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CT
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
Approved Sources 5320-01-096-5630
- Part Number
- Manufacturer
- Status
- 70400-02251-111
- Manufacturer
- 78286 - Sikorsky Aircraft Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5320-01-096-5630
- Characteristic
- Specifications
- FIIG
- Specifications
- A530G0
- Collar Inside Diameter [ABCJ]
- 1.245 Inches Minimum And 1.265 Inches Maximum
- Collar Outside Diameter [ABAA]
- 1.490 Inches Minimum And 1.510 Inches Maximum
- Collar Style [CWBJ]
- Threaded (Break Off) Type
- Collar Overall Height [ABAB]
- 2.770 Inches Minimum And 2.790 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-225-9 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 7075 Overall
- Nominal Thread Size [CQJX]
- 1.250 Inches
- Special Features [FEAT]
- Two Holes 0.070 In. Dia Through One Wall Only
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Class [AAJD]
- 3B
- Thread Direction [AAJF]
- Left-Hand
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 12
Weapon Systems (WSDC) 5320-01-096-5630
DLA Procurement Analysis 5320-01-096-5630
- Last Stock Position:
- 21 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5320-01-096-5630
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5320-01-096-5630
Freight Information 5320-01-096-5630
5320-01-096-5630 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013120. A Sub NMFC of F. It has a NMFC Description of ALUMINUM ARTICLE NOI SUB 6. 5320-01-096-5630 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. 5320-01-096-5630 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 05380 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5320-01-096-5630 is not classified as a special type of cargo when transported by water. 5320-01-096-5630 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5320-01-096-5630 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: