Premium Information is available for this item - Upgrade for $1 a day
5320-00-175-7605
Blind Rivet
5320001757605 001757605 38-105-14-13 MS24662-51 CDR-9301-MS-5-14
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY. View more Blind Rivet
May 2023
4
Marketplace 5320-00-175-7605
Request a Quotation from participating marketplace vendors
Related Documents 5320-00-175-7605 1+ Documents (More...)
Restrictions 5320-00-175-7605
5320-00-175-7605 is a Blind Rivet that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5320-00-175-7605
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- Greece (ZU01)
- Effective Date:
- 1 Mar 2008
Approved Sources 5320-00-175-7605
- Part Number
- Manufacturer
- Status
- MS24662-51
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- 38-105-14-13
- 94222 - Southco Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- CDR-9301-MS-5-14
- 11815 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CDR-9301-MS-5-14
- 05693 - Cherry Textron Inc Cherry Commercial (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5320-00-175-7605
- Characteristic
- Specifications
- FIIG
- Specifications
- A040A0
- Expansion Device [ABAF]
- Drive Stem-Type H
- Fastener Length [AASB]
- 0.552 Inches Minimum And 0.592 Inches Maximum
- Grip Length [ANEE]
- 0.422 Inches Minimum And 0.453 Inches Maximum
- Head Height [AASU]
- 0.067 Inches Minimum And 0.077 Inches Maximum
- Head Style [AASK]
- Universal
- Head Major Diameter [AAZG]
- 0.296 Inches Minimum And 0.328 Inches Maximum
- Heat Treatment [HEAT]
- T-4 Solution Heat Treated Overall
- Material Document And Classification [MDCL]
- Qq-A-430 Fed Spec Single Material Response Body
- Material [MATT]
- Steel Comp 301 Stem Or Steel Comp 302 Stem Or Steel Comp 303 Stem Or Steel Comp 303F Stem Or Steel Comp 303S Stem Or Steel Comp 303Se Stem Or Steel Comp 304 Stem Or Steel Comp 304L Stem Or Steel Comp 305 Stem Or Steel Comp 308 Stem Or Steel Comp 309 Stem Or Steel Comp 309S Stem Or Steel Comp 310 Stem Or Steel Comp 310S Stem Or Steel Comp 314 Stem Or Steel Comp 316 Stem Or Steel Comp 316L Stem Or Steel Comp 317 Stem Or Steel Comp 321 Stem Or Steel Comp 323 Stem Or Steel Comp 324 Stem Or Steel Comp 347 Stem Or Steel Comp 348 Stem Or Steel Comp 385 Stem
- Material Document And Classification [MDCL]
- 66 Fed Std All Material Responses Stem
- Shank Diameter [AAZE]
- 0.154 Inches Minimum And 0.158 Inches Maximum
- Shank Style [AAZF]
- Drive Pin
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Mil Spec 1St Treatment Response Body Or Mil-C-5541 Mil Spec 2Nd Treatment Response Body
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec All Treatment Responses Stem
- Surface Treatment [SFTT]
- Anodize Body Or Chromate Body
- Surface Treatment [SFTT]
- Passivate Stem
Weapon Systems (WSDC) 5320-00-175-7605
DLA Procurement Analysis 5320-00-175-7605
Management Data 5320-00-175-7605
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5320-00-175-7605
Freight Information 5320-00-175-7605
5320-00-175-7605 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013630. A Sub NMFC of X. It has a NMFC Description of ALUM RIVETS. 5320-00-175-7605 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05720 which rates the freight between FCL and LCL. 5320-00-175-7605 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5320-00-175-7605 is not classified as a special type of cargo when transported by water. 5320-00-175-7605 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5320-00-175-7605
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 5320-00-175-7605 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: