Premium Information is available for this item - Upgrade for $1 a day

5315-01-582-5466

Cotter Pin

5315015825466 015825466 103396

A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place. View more Cotter Pin

Managed by United States

NSN Created on 25 Feb 2010

Data Last Changed
November 2023

NATO Update Count
1

NATO Data Quality

STYL Style A1 for 5315-01-582-5466 1/1 — NSN 5315-01-582-5466 (Identification) 1/1

Marketplace 5315-01-582-5466

Need Help?
Request a Quotation from participating marketplace vendors

Updated Every Day

103396 RQST NE

Updated Every Day

5315-01-582-5466 RQST NE

Updated Every Day

5315-01-582-5466 RQST

Updated Every Day

5315-01-582-5466 RQST NE

Restrictions 5315-01-582-5466

5315-01-582-5466 is a Cotter Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.

Import and Export 5315-01-582-5466

Schedule B: Subscribe to View Schedule B
HTS Code: Subscribe to View HTS Code

End Users 5315-01-582-5466

US Army (A919)
Effective Date:: 1 Feb 2010
Supplementary Receivers:: AZ; AMC 3 AMSC C IMC Z IMCACTY AZ

US Air Force (FGGI)
Effective Date:: 1 Feb 2010; AMC 3 AMSC C IMC Z IMCACTY TG

US Marine Corps (MC47)
Effective Date:: 1 Feb 2010; AMC 3 AMSC C IMC Z IMCACTY PA

Approved Sources 5315-01-582-5466

Part Number
Manufacturer
Status
103396: 338X5 - Nd Defense Llc (Active); Primary Buy; RNCC 3 RNVC 2 DAC 3

Datasheet 5315-01-582-5466

Characteristic
Specifications
FIIG: A212A0
End Item Identification [AGAV]: Maxxpro Mrap Vehicle
Diameter [ABMZ]: 0.146 Inches Minimum And 0.150 Inches Maximum
Material [MATT]: Steel Overall
Point Type [BBDT]: Extended Prong Chisel Or Extended Prong Mitre End Or Extended Prong Square Cut
Part Name Assigned By Controlling Agency [CXCY]: Split(Cotter) Pin - Extended Prong
Special Features [FEAT]: Used On The Gunner Hatch
Underloop Length [ABNA]: 1.000 Inches Nominal
Style Designator [STYL]: Standard

Weapon Systems (WSDC) 5315-01-582-5466

Subscribe
View WSDC

Subscribe to View Weapon System Codes...

Subscribe
View Data

DLA Procurement Analysis 5315-01-582-5466

Last Stock Position:: 1053 In Stock
DLA Administrative Lead Time:: Subscribe
DLA Production Lead Time:: Subscribe

Subscribe to View DLA Inventory and Forecast...

Management Data 5315-01-582-5466

Subscribe
View Prices

Effective Date: Organization; Unit of Issue; Unit Price; Qty Unit Pack
Nov 2022: Department of the Army (DA); EA; Subscribe
Oct 2021: Department of the Army (DA); EA; Subscribe
Jan 2021: Department of the Air Force (DF); EA; Subscribe
Oct 2019: Department of the Army (DA); EA; Subscribe

Army

Materiel Category and Inventory Manager:

T: Industrial Supplies (DLA/GSA Items)

Appropriation and Budget Activity:

2: Stock Fund Secondary Items

Management Inventory Segment:

2: Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.

Weapons System / End Item / Homogeneous Group:

00: DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item

Accounting Requirements:

X: Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.

Air Force

Fund:

SF: Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point

Budget:

9: 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors

Price Validation Code:

N: The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.

Expendability Recoverability Repairability:

N: Expendable. Condemn at User. Stock Fund (except Munitions).

Marine Corps

Stores Account:

1: Stock Fund Account Item

Combat Essentiality:

5: Critical Repair Part to a Combat Essential End Item

Echelon Management:

B2

Operational Test:

: No Special Procedures

Similar Supply Items to 5315-01-582-5466

Freight Information 5315-01-582-5466

5315-01-582-5466 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 094380. A Sub NMFC of X. It has a NMFC Description of COTTER PINS/SPRING COTTERS IRON. 5315-01-582-5466 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49340 which rates the freight between FCL and LCL. 5315-01-582-5466 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-582-5466 is not classified as a special type of cargo when transported by water. 5315-01-582-5466 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

Packaging Data 5315-01-582-5466

Responsible Activity
Packaging Data Source: Primary Inventory Control Activity (PICA); --

Storage Environment: Heated General Purpose – Heated 40 F and above

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation: 57.0" H x 11.0" W x 9.0" L; --; --; Over 10lb; Less than 85G; No Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying: --; 67.0" H x 21.0" W x 19.0" L; --; --; Physical Protection; Any Suitable Process

Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking: No Requirement; No Requirement; No Requirement; Not Applicable; Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal; No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container: PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box

Procurement History 5315-01-582-5466 1 Records

Subscribe
View Prices

Contract: Date; CAGE; Quantity; Net Price; Std Price
SPE5E716M2494: 15 Apr 2016; Subscribe; 900; Subscribe; Subscribe

Contracting Technical Data File (CTDF) 5315-01-582-5466 February 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):: T

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required:

Subscribe
View CTDF

Subscribe to View CTDF Details...

Marketplace 5315-01-582-5466

Related Documents 5315-01-582-5466 5+ Documents (More...)

Restrictions 5315-01-582-5466

Import and Export 5315-01-582-5466

End Users 5315-01-582-5466

Approved Sources 5315-01-582-5466

Datasheet 5315-01-582-5466

Weapon Systems (WSDC) 5315-01-582-5466

DLA Procurement Analysis 5315-01-582-5466

Management Data 5315-01-582-5466

Army

Air Force

Marine Corps

Similar Supply Items to 5315-01-582-5466

Freight Information 5315-01-582-5466

Packaging Data 5315-01-582-5466

Item Pack Level (Unpackaged)

Unit Pack Level (Packaged)

Intermediate Pack Level

Procurement History 5315-01-582-5466 1 Records

Contracting Technical Data File (CTDF) 5315-01-582-5466 February 2021

Criticality and Quality

Commercial Properties

Restrictions

Packaging Requirements