Premium Information is available for this item - Upgrade for $1 a day
5315-01-502-5679
Knurled Straight Pin
5315015025679 015025679 1407M66P03
A headless, cylindrically-shaped, straight, solid item with or without a drilled hole(s). It has a straight or diamond knurl. Its length must not exceed 12 inches (304 MM). It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. View more Knurled Straight Pin
May 2023
1
Marketplace 5315-01-502-5679
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-502-5679 1+ Documents (More...)
(Identification) 1/2 NSN 5315-01-502-5679 (Identification) 3/2 - - 1.
BUY NE FedMall Updated Every Day 5315-01-502-5679 RQST NE Updated Every Day 5315-01-502-5679 RQST
Restrictions 5315-01-502-5679
5315-01-502-5679 is a Knurled Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-502-5679
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- United States of America (ZZ)
Approved Sources 5315-01-502-5679
- Part Number
- Manufacturer
- Status
- 1407M66P03
- Manufacturer
- 03350 - General Electric Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-502-5679
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- End Item Identification [AGAV]
- Plate,Tooling Support; F16 Engine
- Diameter [ABMZ]
- 0.4980 Inches Minimum And 0.4985 Inches Maximum
- First End Style [AAGZ]
- Chamfered W/Thru Hole
- First End Taper Angle [CRMG]
- 30.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.160 Inches Nominal
- Hardness Rating [CQFM]
- 55.0 Rockwell C Minimum Overall And 59.0 Rockwell C Maximum Overall
- Material Document And Classification [MDCL]
- Sae 01 Assn Std Single Material Response Overall
- Material [MATT]
- Steel Overall
- Knurl Length [BFMT]
- 1.000 Inches Nominal
- Knurl Outside Diameter [AQZS]
- 0.750 Inches Nominal
- Second End Style [AAHP]
- Chamfered W/Thru Hole
- Second End Taper Angle [CTHC]
- 45.0 Degrees Nominal
- Second End Taper Length [AMFM]
- 0.060 Inches Nominal
- Second End Relationship With First End [CQBB]
- Not Identical
- Overall Length [ABHP]
- 2.250 Inches Nominal
- Special Features [FEAT]
- Knurled Head Flat Edge 0.600 In. Dia.
- Style Designator [STYL]
- Diamond Knurled
- Surface Treatment Document And Classification [STDC]
- Mil-C-13924 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Oxide Overall
DLA Procurement Analysis 5315-01-502-5679
Management Data 5315-01-502-5679
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JU
- F118-GE-100 ENGINE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5315-01-502-5679
Freight Information 5315-01-502-5679
5315-01-502-5679 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-502-5679 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-502-5679 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-502-5679 is not classified as a special type of cargo when transported by water. 5315-01-502-5679 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-01-502-5679 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: