Premium Information is available for this item - Upgrade for $1 a day
5315-01-502-2622
Knurled Straight Pin
5315015022622 015022622 1407M82P06
A headless, cylindrically-shaped, straight, solid item with or without a drilled hole(s). It has a straight or diamond knurl. Its length must not exceed 12 inches (304 MM). It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. View more Knurled Straight Pin
May 2023
1
Marketplace 5315-01-502-2622
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-502-2622 1+ Documents (More...)
(Identification) 1/2 NSN 5315-01-502-2622 (Identification) 3/2 - - 1.
BUY NE FedMall Updated Every Day 5315-01-502-2622 RQST NE Updated Every Day 5315-01-502-2622 RQST
Restrictions 5315-01-502-2622
5315-01-502-2622 is a Knurled Straight Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-502-2622
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- United States of America (ZZ)
Approved Sources 5315-01-502-2622
- Part Number
- Manufacturer
- Status
- 1407M82P06
- Manufacturer
- 03350 - General Electric Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-502-2622
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- End Item Identification [AGAV]
- F16 Engine
- Diameter [ABMZ]
- 0.3735 Inches Minimum And 0.3745 Inches Maximum
- First End Style [AAGZ]
- Chamfered
- First End Taper Angle [CRMG]
- 30.0 Degrees Nominal
- First End Taper Length [AMCS]
- 0.160 Inches Nominal
- Material [MATT]
- Steel Overall
- Knurl Length [BFMT]
- 0.780 Inches Nominal
- Knurl Outside Diameter [AQZS]
- 0.630 Inches Nominal
- Second End Style [AAHP]
- Chamfered
- Second End Taper Length [AMFM]
- 0.060 Inches Nominal
- Second End Relationship With First End [CQBB]
- Not Identical
- Overall Length [ABHP]
- 1.900 Inches Nominal
- Special Features [FEAT]
- Pin Has A Hole Drilled Thru The Knurled End Of Pin At A 45 Degree Angle;Protective Finish Per Mil-C-13924, Class 1 (Black Oxide);Coat Trtd Surf With Corrosion Preventive Oil
- Style Designator [STYL]
- Diamond Knurled
DLA Procurement Analysis 5315-01-502-2622
Management Data 5315-01-502-2622
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JU
- F118-GE-100 ENGINE
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5315-01-502-2622
Freight Information 5315-01-502-2622
5315-01-502-2622 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-502-2622 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-01-502-2622 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-502-2622 is not classified as a special type of cargo when transported by water. 5315-01-502-2622 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-01-502-2622 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: