5315-01-481-2533

United States (US) 4. 5315-01-481-2533 Marketplace Restrictions Approved Sources Datasheet Management
Request a Quotation from participating marketplace vendors Request Updated Every Day 5315-01-481-2533
RQST NE Updated Every Day 5315-01-481-2533 RQST Updated Every Day 5315-01-481-2533 RQST NE Related Documents

Upgrade your Account Upgrade 5315-01-607-1195Threaded Straight Pin5315016071195 016071195 8100-1256-0262 PT NO 248
Documents 5315-01-607-1195 1+ Documents ( More... https//www.nsnlookup.com /fsg-53/fsc-5315/us 5315-01-481-2533
Threaded Straight Pin 5315014812533 014812533 Upgrade your Account Upgrade 5315-01-481-2533Threaded

5305-01-607-7557 5305016077557 016077557 is an externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.

5305-01-607-6668 5305016076668 016076668 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.