Premium Information is available for this item - Upgrade for $1 a day
5315-01-413-9409
Headless Shoulder Pin
5315014139409 014139409 20000540116-005
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. View more Headless Shoulder Pin
May 2023
3
Marketplace 5315-01-413-9409
Request a Quotation from participating marketplace vendors
Related Documents 5315-01-413-9409 1+ Documents (More...)
Headless Shoulder Pin 5315014139409 014139409 5315-01-413-9409 5315014139409 014139409 is a cylindrically-shaped
Restrictions 5315-01-413-9409
5315-01-413-9409 is a Headless Shoulder Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5315-01-413-9409
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5315-01-413-9409
- Part Number
- Manufacturer
- Status
- 20000540116-005
- Manufacturer
- 43999 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5315-01-413-9409
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- First End Style [AAGZ]
- Square
- First End Location [CRDY]
- Threaded End
- First Step Diameter [ABPR]
- 0.4895 Inches Minimum And 0.4900 Inches Maximum
- Material [MATT]
- Iron Alloy 660 Overall
- Nominal Thread Size [CQJX]
- 0.375 Inches
- Material Document And Classification [MDCL]
- Ams 5737 Assn Std Single Material Response Overall
- Second End Style [AAHP]
- Chamfered
- Second End Taper Length [AMFM]
- 0.300 Inches Nominal
- Second End Relationship With First End [CQBB]
- Not Identical
- Second End Tip Radius [CSGL]
- 0.060 Inches Nominal
- Second Step Length [ABPU]
- 0.360 Inches Minimum And 0.370 Inches Maximum
- Second Step Diameter [ABPT]
- 0.4895 Inches Minimum And 0.4900 Inches Maximum
- Shoulder Length [AJWR]
- 0.090 Inches Nominal
- Shoulder Width Across Flats [AAVJ]
- 0.750 Inches Nominal
- Overall Length [ABHP]
- 1.710 Inches Nominal
- Thread Series Designator [THSD]
- Unjf
- Style Designator [STYL]
- Shoulder
- Surface Treatment [SFTT]
- Passivate Overall
- Third Step Length [ABPW]
- 0.450 Inches Nominal
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Third Step Diameter [ABPV]
- 0.375 Inches Nominal
- Thread Length [AASA]
- 0.450 Inches Nominal
DLA Procurement Analysis 5315-01-413-9409
Management Data 5315-01-413-9409
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5315-01-413-9409
Freight Information 5315-01-413-9409
5315-01-413-9409 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5315-01-413-9409 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5315-01-413-9409 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-01-413-9409 is not classified as a special type of cargo when transported by water. 5315-01-413-9409 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5315-01-413-9409 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: